PDA

View Full Version : What engine to build for my Delorean?



silverlux
08-20-2014, 11:16 AM
Hi everyone, I've been off my project lately due to nice weather here and busy with other things. Doing some varnishing and detail stuff on Y frame.
Coming close to have everything ready for engine space. So now I have question what engine to build?
All suggestions will be considered along with information and link to pictures as I need a lot of them.
Currently I'm strongly considering to build and fit prototype Delorean vin 0001 engine, picture bellow
30182

this is how far I'm now with my project:
http://i39.servimg.com/u/f39/17/82/32/09/dscn3010.jpg (http://www.servimg.com/image_preview.php?i=481&u=17823209)

Dangermouse
08-20-2014, 12:14 PM
The proto-1 car actually was fitted with a 4-cylinder citroen engine. The engine you show is a legend twin turbo PRV unit that was developed in the US as a possible future turbo-charged version. there are a couple of cars with it fitted, but all cars came from the factory with the standard PRV engine, of which there are plenty of photos.

Perhaps not as many wooden horses as the Legend TT, but if I had to vote, I'd go with the original

silverlux
08-20-2014, 12:42 PM
The proto-1 car actually was fitted with a 4-cylinder citroen engine. The engine you show is a legend twin turbo PRV unit that was developed in the US as a possible future turbo-charged version. there are a couple of cars with it fitted, but all cars came from the factory with the standard PRV engine, of which there are plenty of photos.

Perhaps not as many wooden horses as the Legend TT, but if I had to vote, I'd go with the original


That is a very valuable information here and your vote has been accepted ;)

DavidProehl
08-20-2014, 01:27 PM
I would also vote for the standard factory PRV engine. Everything else on your model appears to be going for the factory setup rather than the prototype, so that would keep it consistent.

silverlux
08-20-2014, 01:43 PM
I would also vote for the standard factory PRV engine. Everything else on your model appears to be going for the factory setup rather than the prototype, so that would keep it consistent.

hmmmm. so 2:0 in favor of stock engine :) so far

Dangermouse
08-20-2014, 02:06 PM
I would also vote for the standard factory PRV engine. Everything else on your model appears to be going for the factory setup rather than the prototype, so that would keep it consistent.

well apart from the RHD steering wheel.....,


so one could make the argument that if they had released a (proper) 1983 RHD model for the UK market, it would have been available with the Legend TT set up??

silverlux
08-20-2014, 02:39 PM
well apart from the RHD steering wheel.....,


so one could make the argument that if they had released a (proper) 1983 RHD model for the UK market, it would have been available with the Legend TT set up??
Does legend tt and stock engine has one and the same engine block?

Dangermouse
08-20-2014, 02:53 PM
Basically yes.

This might be an interesting read for you:

http://www.pjgrady.co.uk//GenericContent.aspx?PageType=Legend_Industries&ShowContent=Legend_Industries.html

silverlux
08-20-2014, 03:19 PM
Basically yes.

This might be an interesting read for you:

http://www.pjgrady.co.uk//GenericContent.aspx?PageType=Legend_Industries&ShowContent=Legend_Industries.html

appreciate that Dangermouse...I'm currently going through 3281 build on this site, trying to pick up vibe of ya mans engine http://www.noroads.com/delorean/3281