View Full Version : General Metric dash – Canadian models
Dangermouse
10-23-2014, 03:33 PM
Through my little side project into Museum DeLoreans (http://dmctalk.org/showthread.php?2973-DeLoreans-on-Display-%28AKA-Museum-DeLoreans%29&p=159767#post159767), I have found one in Japan that surprisingly is a “Canadian” model, vin 17147.
Now, I knew that they had a 240km/h speedo fitted (as well as the oil pressure in kg/cm2 and temp in C), but I don’t recall seeing the red bars above 100. Is that normal?
http://dmctalk.org/attachment.php?attachmentid=31262&d=1414092769
vps3922
10-24-2014, 10:46 AM
http://dmctalk.org/attachment.php?attachmentid=31262&d=1414092769
Hmm, I cannot see the picture. Can you try and upload again?
Dangermouse
10-24-2014, 11:45 AM
well, that is odd. I can see it fine, but there was a glitch when I uploaded it the first time. I guess it is just referencing an image on my PC.
Here it is again
http://dmctalk.org/attachment.php?attachmentid=31272&d=1414165490
Rich W
10-24-2014, 12:32 PM
Now, I knew that they had a 240km/h speedo fitted (as well as the oil pressure in kg/cm2 and temp in C), but I don’t recall seeing the red bars above 100. Is that normal?
IIRC, that is the same as on my Canadian spec Grand National DeLorean, VIN..17063.
vps3922
10-24-2014, 12:38 PM
Wow, that is looking amazing. Very nice.
In the picture the brake light indicator has a brake symbol (I think?) instead of the word "BRAKE". Was that just for the Canadian models, or just a general change for later VINs?
Also, what is that below the "DMC" logo on the left-hand side? Is that a reflection of something or an additional warning light of some sort. Mine is blank below the logo.
17076
10-25-2014, 10:45 AM
17076 does not have those red bars. I have never seen them before.
Wells Auto
10-25-2014, 10:57 AM
Nor does 17104, or any of the other Canadian spec cars I've seen. It would be great to know more about where in Canada that car may have originally come from.
This is what they normally look like:
http://www.deloreancarshow.com/dcs-2002/2002-vendors/w-101-0150_IMG.jpg
The brake symbol was only included on the metric clusters in place of the word "BRAKE" from what I've seen. I think the thing below the dmc logo is a reflection.
Tillsy
10-25-2014, 04:22 PM
I love it - also the red region at the bottom of the fuel gauge
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.