What a difference Momo steering wheel makes...

[rileydawgg]

In my ongoing "What a difference..." series, I present my old steering wheel and new Momo steering wheel. Not only does it completely change the look of the interior (probably the single most commented on item in my interior), but the thicker grip makes driving the car more enjoyable as well. And yes, this is a real Momo not the knockoff. It is super sturdy, the DMC logo looks like it was supposed to be there (thank you DMC CA), and it feels really good cruising down the freeway or taking the tight turns at 3mph in my office parking garage. I was worried with the adapter it would stick too far out, but it's actually perfect. Worth every penny as far as I'm concerned, and interesting how every single casual observer can't believe it's not a DeLorean steering wheel.

Only issue I have is the texture on the adaptor is grainy and I wish it was smooth like the rest of the steering column. At some point, I'll have to sand it down and repaint.

[ALEXAKOS]

I can't handle thin steering wheels. Got long fingers and thin steeling wheels are close to give me hand cramps.

Most old cars had thin wheels. First thing I have to change on them. Yes the momo wheel is the best if not only good replacement for it ;)

Aesthetically the brushed aluminum of that wheel co pimentos the stainless of the body. Simply perfect. Especially on a black interior like yours. Mine is gray and it does not really look perfect but a guess a gray steering wheel would look stupid.

[rileydawgg]

I can't handle thin steering wheels. Got long fingers and thin steeling wheels are close to give me hand cramps.

Most old cars had thin wheels. First thing I have to change on them. Yes the momo wheel is the best if not only good replacement for it ;)

Aesthetically the brushed aluminum of that wheel co pimentos the stainless of the body. Simply perfect. Especially on a black interior like yours. Mine is gray and it does not really look perfect but a guess a gray steering wheel would look stupid.

Yeah, I changed the entire interior to black... I just prefer it that way even though they never came like this from the factory; for me with the wheel and new stereo, it feels like a more modern DeLorean inside while retaining the classic Delorean look outside.

[ALEXAKOS]

Nice;) here is my cockpit
http://tapatalk.imageshack.com/v2/14/10/23/c4e7f69c2afb3a8e636fdbf75a93aa38.jpg

[rileydawgg]

Very nice. I see you don't have your vents in... Are you redoing all your AC?

[Kenny_Z]

I have the knockoff but you're right. The wheel really improves the way the car feels. Argh, you made me want to go driving and I can't because I'm stuck at work.

[Shark Pilot]

In my ongoing "What a difference..." series, I present my old steering wheel and new Momo steering wheel. Not only does it completely change the look of the interior (probably the single most commented on item in my interior), but the thicker grip makes driving the car more enjoyable as well. And yes, this is a real Momo not the knockoff. It is super sturdy, the DMC logo looks like it was supposed to be there (thank you DMC CA), and it feels really good cruising down the freeway or taking the tight turns at 3mph in my office parking garage. I was worried with the adapter it would stick too far out, but it's actually perfect. Worth every penny as far as I'm concerned, and interesting how every single casual observer can't believe it's not a DeLorean steering wheel.

Only issue I have is the texture on the adaptor is grainy and I wish it was smooth like the rest of the steering column. At some point, I'll have to sand it down and repaint.

I've been needing a new wheel for some time. Was just gonna buy an OE one, but I like this one A LOT. Where do I get it??:wow:

[ALEXAKOS]

Very nice. I see you don't have your vents in... Are you redoing all your AC?

Complete restoration frame up. See vin 5992 in the restoration section ;)

[Denverdelorean]

I've been needing a new wheel for some time. Was just gonna buy an OE one, but I like this one A LOT. Where do I get it??:wow:

right here.

http://www.amazon.com/MEVO35BK1P-Millenium-Leather-Steering-Wheel/dp/B000GVQD2C

[ALEXAKOS]

right here.

http://www.amazon.com/MEVO35BK1P-Millenium-Leather-Steering-Wheel/dp/B000GVQD2C

That is the original. The one I have. I have seen the replica to be a bit more "leathery" cause momo now blogger stitches the leather. They press it mechanically.

Either way, your best solution is get a complete set from dmcmw with adapter. Trouble free. Mine was A LOT OD WORK to accomplish and came out more than the ready one.

[rileydawgg]

I got mine off Amazon because at the time all the DMC vendors were out of stock, and I didn't want to wait. DMC CA got the adapter and logo and installed for me because they had the car for some other stuff anyway.

It has a bit less sheen than the rest of the leather and vinyl in the car so I've been trying to soak it up with leather conditioner as much as I can to match. Any recommendations for conditioner that isn't oily but keeps a nice shine to the leather... and also doesn't just go away as soon as you grab the wheel? I'm currently using this...

31273

[Shark Pilot]

right here.

http://www.amazon.com/MEVO35BK1P-Millenium-Leather-Steering-Wheel/dp/B000GVQD2C

Hey THANKS!! That is a good deal condering Hervey sells the OE one for over $300. How do I get the adapter and DMC logo on there?

[Lightning]

Hey THANKS!! That is a good deal condering Hervey sells the OE one for over $300. How do I get the adapter and DMC logo on there?

I'm interested in an answer to this as my steering wheel needs to be recovered or replaced.

Sam

[acaciolo]

I got my adaptor and momo knockoff steering wheel from dave at dmcmw. the Chinese knockoff which is shockingly nice was less tha $50. he also sells the dmc logo for the center. the adaptor was the most expensive part at almost $200. still under $300 for everything and really nice. josh from dpi gave me the tip about how to get the old wheel off by using an air chisel with a pointed bit. came right off.

tony c

[Delorean Industries]

Flat tip with nut still on! Glad it worked though.

[acaciolo]

flat tip, pointy tip, I like all kind of tips.

worked perfectly.

[Trstno1]

I have the knockoff but you're right. The wheel really improves the way the car feels. Argh, you made me want to go driving and I can't because I'm stuck at work.

Can you post a pic of the knock off so that I can compare it against the real momo?

[Trstno1]

In my ongoing "What a difference..." series, I present my old steering wheel and new Momo steering wheel. Not only does it completely change the look of the interior (probably the single most commented on item in my interior), but the thicker grip makes driving the car more enjoyable as well. And yes, this is a real Momo not the knockoff. It is super sturdy, the DMC logo looks like it was supposed to be there (thank you DMC CA), and it feels really good cruising down the freeway or taking the tight turns at 3mph in my office parking garage. I was worried with the adapter it would stick too far out, but it's actually perfect. Worth every penny as far as I'm concerned, and interesting how every single casual observer can't believe it's not a DeLorean steering wheel.

Only issue I have is the texture on the adaptor is grainy and I wish it was smooth like the rest of the steering column. At some point, I'll have to sand it down and repaint.

Can you post a side pic of the wheel so that I can see the profile of the adaptor? Does the momo stick out any further than the stock?

[DMCMW Dave]

Can you post a side pic of the wheel so that I can see the profile of the adaptor? Does the momo stick out any further than the stock?

See other steering wheel thread. There is a comparison shot there.

It's designed to stick out the same as the original wheel. The older adapters pulled the wheel closer to the dash and you tend to hit your fingers on the signal stalks. I do have a couple of those available as well from trade-ups.

[Kenny_Z]

Can you post a pic of the knock off so that I can compare it against the real momo?

Here's the knockoff held up to the stock wheel.

http://uploads.m-cgi.com/kennyz/Delorean/Projects/steering03.jpg

Installed but with the center emblem removed.
http://uploads.m-cgi.com/kennyz/Delorean/Projects/steering16.jpg

[Trstno1]

Here is a good before and after pic. I really couldn't be happier with the results! If anyone is looking for a stock steering wheel let me know....

[rileydawgg]

Congrats... what a difference, huh? Mine is a daily driver and every time I get in, i appreciate every penny spent on it.