[WTB] Volvo B280 Idler pulley brackets

[BABIS]

Hi guys,

I'm searching for some parts from a Volvo B280 engine (the later efi even firing PRVs used by Volvo, IIRS used in later 760 and 780)

If you can check in your local junkyard it would be very helpful :) I had no luck..

I circled in red the parts I'm interested in:

http://imagizer.imageshack.us/v2/640x480q90/908/HWcXjd.png

the whole A/C tensioner assembly and the black plastic cover for the spark distributor..

Thanks in advance!

[Josh]

Any reason why you are keeping the distributor? EDIS-6 works great :)

[BABIS]

Any reason why you are keeping the distributor? EDIS-6 works great :)

because I already bought Magnecor KV-85 igniton leads which work with the original distributor :D (they are very expensive...)

I know there are better choices but I'm pretty sure it is not bad setup since it was used in all the efi prv versions (all except one version of the Renault Laguna which had the coil pack)

[dn010]

I believe I have the idler parts, I have about 3 or 4 B280 engines disassembled and scattered about my garage, attic and storage room so it will take me a little while to find them. I know for sure I have the distributor cover but unfortunately I am not ready to part with that just yet. I will PM you once I find the idler parts.

Just curious, are you using MegaSquirt?

[BABIS]

I believe I have the idler parts, I have about 3 or 4 B280 engines disassembled and scattered about my garage, attic and storage room so it will take me a little while to find them. I know for sure I have the distributor cover but unfortunately I am not ready to part with that just yet. I will PM you once I find the idler parts.

Just curious, are you using MegaSquirt?

Thanks! I am now converting the car to Megasquirt from the previously installed original Renix efi..