Torque question

[Justin51982]

Anyone know the torque specs on the y pipe?

[DMC-81]

Try this thread..

http://dmctalk.org/showthread.php?3005-Torque-settings-for-water-pump-and-Y-pipe

[PJ Grady Inc.]

Anyone know the torque specs on the y pipe?

I'm thinking you mean the aluminum coolant pipe in the VOD right? I would suggest 11 or 12 ft Lb's as the engine sump and timing cover are in that range and they are 11mm head bolts with 7mm diameters. The A.T.'s valve body also uses similiar bolts and torque spec's.
Rob

[Justin51982]

I'm thinking you mean the aluminum coolant pipe in the VOD right? I would suggest 11 or 12 ft Lb's as the engine sump and timing cover are in that range and they are 11mm head bolts with 7mm diameters. The A.T.'s valve body also uses similiar bolts and torque spec's.
Rob

It was....thank you :)