PDA

View Full Version : Dremel Tool



Rich_NYS
05-02-2015, 03:26 PM
I need to get a Dremel tool, I'm finding different models & accessory kits. Anybody have a recommendation for either?

Bitsyncmaster
05-02-2015, 03:34 PM
Don't get the battery operated one. Get the 120 volt plug in unit. Mine is getting old so not up on what got changed. I also got the flexible (about 3 foot) drive accessory. Get the large (dia.) pack of cutoff wheels, the ones in the kits suck.

Jedidentist
05-02-2015, 04:37 PM
Yeah, the larger cutoff wheels with fiber reinforcement. Cordless is nice, but it's still bulky. It's much better to have the extension and corded one. I've already burned through one Dremel and my second one isn't looking too healthy either.

Rich_NYS
05-02-2015, 05:03 PM
Good info, thanks!

I see a 3000 and 4000, those are the corded models. $25 difference between the two....trying to figure out what's different aside from the case.

JETS 81 DMC
05-02-2015, 05:43 PM
Good info, thanks!

I see a 3000 and 4000, those are the corded models. $25 difference between the two....trying to figure out what's different aside from the case.

Here is a link with comparisons.

https://www.google.com/search?q=dremel+4000+vs+3000&sourceid=ie7&rls=com.microsoft:en-US:IE-SearchBox&ie=&oe=&gws_rd=ssl

Jedidentist
05-02-2015, 05:55 PM
More power/torque and flexibility to use older attachments. If you plan on using it a lot, I'd pay the extra $25.

Rich_NYS
05-02-2015, 05:57 PM
4000 it is...thanks!

SS Spoiler
05-02-2015, 06:18 PM
I picked up the "router" attachment. With a tiny 1/16" bit I make custom wood signs.

Jimmyvonviggle
05-02-2015, 10:48 PM
I picked up the "router" attachment. With a tiny 1/16" bit I make custom wood signs.

The router attachment is good , just be careful because the Dremel doesn't have the torque of a real router.

David T
05-03-2015, 05:52 PM
The router attachment is good , just be careful because the Dremel doesn't have the torque of a real router.

The Dremel is a consumer grade tool. It is not made for heavy, continuous use. OK for small jobs once-in-a-while. If you are going to use it hard you will burn it out. Change the brushes frequently. Blow it out with air often. Use eye protection.

Jimmyvonviggle
05-03-2015, 06:33 PM
The Dremel is a consumer grade tool. It is not made for heavy, continuous use. OK for small jobs once-in-a-while. If you are going to use it hard you will burn it out. Change the brushes frequently. Blow it out with air often. Use eye protection.

Thanks for the obvious response. Of course it is a consumer grade tool, never thought it wasn't. Just saying it has limitations as a router, wasn't planing on building cabinets with it.

DMCVegas
05-04-2015, 06:21 AM
Don't get the battery operated one. Get the 120 volt plug in unit. Mine is getting old so not up on what got changed. I also got the flexible (about 3 foot) drive accessory. Get the large (dia.) pack of cutoff wheels, the ones in the kits suck.

All of that, and especially on the Flex-Shaft accessory. I had a bolt for the water pump bypass snap-off one time, and it was so much easier to just hang the Dremel from the engine cover and go in with the less bulky handpiece to cut a slot into the bolt.

Otherwise, spend the extra money on the variable speed unit. You'll be glad you did.