View Full Version : General Disconnect Original Clifford Alarm
fnzen
05-15-2015, 08:51 PM
So Ive got a Clifford alarm that was installed new and all its good for is draining the battery
I cant seem to find schematics
should I just start disconnecting?
Any advice appreciated!
DMCMW Dave
05-15-2015, 09:40 PM
So Ive got a Clifford alarm that was installed new and all its good for is draining the battery
I cant seem to find schematics
should I just start disconnecting?
Any advice appreciated!
The only thing to watch out for is if they included the ignition lock-out function. If they did, you have to figure out where they cut into the starter wiring. Usually right at the steering column white/red wire, but sometimes alarm installers can be sneaky.
fnzen
05-15-2015, 10:22 PM
yes it has something like a lock out system because there is a key that has to be coded if the battery goes completely out or disconnected
thanks for the tip of what to look for
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.