dn010
08-19-2015, 06:47 PM
Bear with me as I will have additional parts to add as I get to them, this is just a start to what I have to get rid of. All prices are OBO and include shipping to the lower 48 unless otherwise noted. These will be listed on Ebay too over the weekend as I really need to start getting some room back that all these parts are taking up.
#108263 - Bulkhead plate, it's in acceptable condition with a possible ding here and there. It will come with the coil as shown. The coil was in working condition, the suppressor wire is broken. It does not have the pad on the back of it, I needed to remove it in order to use this plate as a template for my own, custom made plate. $120
#110185 - Wiring for the rear of the car. It will come with some splices especially where the resistor is. It also does not have the large brown wires for the alternator wrapped up. I ran my own cable from the alternator to the bulkhead and removed the wires from this harness. Bulkhead connectors are good but have dielectric grease on them. $100
#100233 - Anti Roll Bar, this has rust and will need to be refinished for your car. $75 + shipping
#105177 - Lower Control Arm #1, original, excellent condition with new bushing, does not have a ball joint. Blasted & freshly painted in KBS black. $300
#105177 - Lower Control Arm #2, heavy duty remake - speculated to be designed by Ken Koncelik (see thread http://dmctalk.org/showthread.php?11196-Upgraded-lower-control-arm). Blasted and painted KBS black, new bushing, no ball joint. $450
#108754 - Rack & Pinion - This is just parts if yours is no good. The rack is missing. The plastic insert that guides the rack appears to be good. $200
#102620 - Piston & Liner assembly. It has 3 notches on the top of the liner if that means anything to you (not sure what the notches represent), comes in original box. Someone had removed the wax cloth it was originally wrapped in, so it has some corrosion on the OUTSIDE of the liner and the top. There is no rust or corrosion on the piston, pin, inside liner, etc even when the piston is moved up or down. I wrapped this up in an oil soaked news paper and put it back in the box when I bought it - probably 10 years ago. $250
#106825 Mounting tray - behind the driver seat that mounts the ECUs and all that fun stuff. NLA, good condition, $175.
#106828 - Support Rod. What else can I say? $30 (shipping included)
#? - Plate that holds the resistor. Not sure what part # it is or how much its worth. "upgraded" specialT resistor included and does work. The plate could probably use sandblasting and refinishing. $40
Some pictures posted below. Again, OBO. I'll update this with more parts and pictures as I can. Don't forget i have hub carriers, an ECU and a whole engine to sell.
3621236213362143621536216362173621836219
#108263 - Bulkhead plate, it's in acceptable condition with a possible ding here and there. It will come with the coil as shown. The coil was in working condition, the suppressor wire is broken. It does not have the pad on the back of it, I needed to remove it in order to use this plate as a template for my own, custom made plate. $120
#110185 - Wiring for the rear of the car. It will come with some splices especially where the resistor is. It also does not have the large brown wires for the alternator wrapped up. I ran my own cable from the alternator to the bulkhead and removed the wires from this harness. Bulkhead connectors are good but have dielectric grease on them. $100
#100233 - Anti Roll Bar, this has rust and will need to be refinished for your car. $75 + shipping
#105177 - Lower Control Arm #1, original, excellent condition with new bushing, does not have a ball joint. Blasted & freshly painted in KBS black. $300
#105177 - Lower Control Arm #2, heavy duty remake - speculated to be designed by Ken Koncelik (see thread http://dmctalk.org/showthread.php?11196-Upgraded-lower-control-arm). Blasted and painted KBS black, new bushing, no ball joint. $450
#108754 - Rack & Pinion - This is just parts if yours is no good. The rack is missing. The plastic insert that guides the rack appears to be good. $200
#102620 - Piston & Liner assembly. It has 3 notches on the top of the liner if that means anything to you (not sure what the notches represent), comes in original box. Someone had removed the wax cloth it was originally wrapped in, so it has some corrosion on the OUTSIDE of the liner and the top. There is no rust or corrosion on the piston, pin, inside liner, etc even when the piston is moved up or down. I wrapped this up in an oil soaked news paper and put it back in the box when I bought it - probably 10 years ago. $250
#106825 Mounting tray - behind the driver seat that mounts the ECUs and all that fun stuff. NLA, good condition, $175.
#106828 - Support Rod. What else can I say? $30 (shipping included)
#? - Plate that holds the resistor. Not sure what part # it is or how much its worth. "upgraded" specialT resistor included and does work. The plate could probably use sandblasting and refinishing. $40
Some pictures posted below. Again, OBO. I'll update this with more parts and pictures as I can. Don't forget i have hub carriers, an ECU and a whole engine to sell.
3621236213362143621536216362173621836219