View Full Version : Split rants from: Engine new delorean owner need engine help!
dn010
10-27-2015, 02:09 PM
She has already been advised of this forum. To quote Loo and "Boo"'s posting over there: "There's also DMC Talk for info, but many members there leave a lot to be desired. Going on DMC Talk is like going to an all male nude beach , there are dicks everywhere!
How wonderful they are.
If you're looking to do a carb project. You should also join
www.dmctoday.com. The carburetor conversion folks hang out there.
Lou and "Boo"
10-27-2015, 02:13 PM
Call it like I experience it man. I stand by my statement. But I can see she hasn't encountered the real ones here ...yet...
It's nice to see you guys giving helpful advice and not turning off yet another fellow owner. Kudos to y'all !
dn010
10-27-2015, 02:19 PM
That is okay - I'll admit I've come across some harsh threads that made me want to jump ship- but not ALL of us are out there to give everyone a bad experience or hard time. I'm just here to offer help regardless of what you're doing with the car.
Call it like I experience it man. I stand by my statement. But I can see she hasn't encountered the real ones here ...yet...
It's nice to see you guys giving helpful advice and not turning off yet another fellow owner. Kudos to y'all !
Lou and "Boo"
10-27-2015, 02:23 PM
If they could all be like you, but there are soooo many upsetting jerky people here. That's all I was saying. Not that there aren't helpful people too. I am truly surprised Rachel wasn't persecuted for mentioning 'carberator'. Not yet anyway. :rolleyes1:
DMCVegas
10-27-2015, 03:00 PM
I am truly surprised Rachel wasn't persecuted for mentioning 'carberator'. Not yet anyway. :rolleyes1:
https://i.imgflip.com/aw6ug.jpg
Really? We're going to try and start this again?
Let's get this cleared up right now so that there is no confusion at all here, or misinterpretation: No one ever had a problem with carburetors. Even I have considered switching to carbs as a cost-saving alternative. I also think that in case BOSCH ever decides to cease support for K-Jetronic, that they're an excellent "Plan B" to keep our cars going when fuel injection parts become cost prohibitive, let alone non-existent.
Speaking on my own behalf, the problem that I had with the great carburetor shit storm of days gone by was the fact that there was a great deal of misinformation about K-Jetronic being purposefully spread around to scare the shit out of new owners simply to not only bolster a some sort of flawed opinion of the superiority of carburetors against any type of fuel injection, but the fact that the person who was doing this was only doing it for the benefit bolstering their own ego by trying to artificially invent themselves as the ONLY source for carburetor conversions. That my friend was positively proven the moment I challenged that person to draft up a conversion guide for the archives so that anyone could access the resource at any time rather than going to that person directly. Just as we have done now for 3 decades in our marque's physical publications and digital archives, we create standardized procedures for improvements and modifications so as to benefit the entire community. That's when the attack against me became personal, and then I, and many others if not the entire DMCTalk community got labeled as "hating carburetors". And that is a lie. Plus not forget the incessant trolling (which this is rather reminiscent of) that kept on trying to start the fights over and over again.
If a car gets converted to a carburetor, I don't see a big deal with that. But I will absolutely say for a fact that such a modification should be done as a fully conscionable, and educated choice on behalf of the car's owner. They should not be scared or bullied into anything simply because somebody with abandonment issues has to feel "needed" by someone and sacrifices the owner's confidence for just such a repugnant and twisted personal gain.
Lou and "Boo"
10-27-2015, 03:20 PM
I see your opinion. I wasn't trying to start or resurrect anything with my 4 line post. As always, I was just posting my viewpoint and feelings honestly. I also didn't think someone who doesn't want something started again would make a multi paragraph post about it. Seems counter-productive to me, that's all.
Carry on y'all and let's help this fellow owner!
sdg3205
10-27-2015, 03:48 PM
I could be wrong, but last time I was on Today, Bill was leaving in a huff. Still, Steve Rice could probably help.
EDIT - never mind, he's still there.
Lou and "Boo"
10-27-2015, 04:04 PM
I think both forums could offer help with various things. It's not ALL about getting that engine started, as we all know.
It's nice to see people being humane and helpful. :thumbup:
DMCVegas
10-27-2015, 04:21 PM
I see your opinion. I wasn't trying to start or resurrect anything with my 4 line post. As always, I was just posting my viewpoint and feelings honestly. I also didn't think someone who doesn't want something started again would make a multi paragraph post about it. Seems counter-productive to me, that's all.
Hey, I just want the record clear for all to see. Bill polarized a whole lot of people to think that just because we offered advice on how to fix K-Jet, that meant that we were also purists that detest carbs at all costs for the sake of remaining stock (yet couldn't explain how we also supported EFI). I support carburetors. If it's what is needed to get a DeLorean back on the road because of budgetary concerns, or whatever, that's great! We got a car back on the road!
I could be wrong, but last time I was on Today, Bill was leaving in a huff. Still, Steve Rice could probably help.
Couple things here:
1. Bill has been trying to leave the DML in a huff for like what, 17, 18 years now? So if you had like a coloring book of me right now, guess which crayon you would use to color me upon hearing that news:
http://blog.robballen.com/images/blog_robballen_com/WindowsLiveWriter/Wellcolorme_9893/image_89f853d6-51c7-4d57-b2ec-06f4c3d43a59.png
(side note: I had to see this, so for the first time I stopped by over there and saw that thread. Here is some good listening music while reading: https://www.youtube.com/watch?v=S1_xDytEB1Q And it also sucks that Chad became the scapegoat-dujour)
2. Screw having to rely upon people for parts and knowlege! This is precisely the thing that I do NOT think we should be subjugated to within the community!
Who want's a Webber 6-Pack!
http://www.chadil.com/en/33-intake-manifolds-renault?p=2
And if you don't like that, the Renault Club over in the UK can help you out!
Carry on y'all and let's help this fellow owner!
Agreed! Which if I, or anyone else was against carburetors, would I be trying to source manifolds from over in Europe after all these years? :dunno:
David T
10-27-2015, 04:46 PM
I could be wrong, but last time I was on Today, Bill was leaving in a huff. Still, Steve Rice could probably help.
EDIT - never mind, he's still there.
The closer you can keep your car to stock with the K-Jet fuel system the more the car will be worth. A properly set-up and running K-Jet system, IMHO, will run better, be more reliable, and provide better fuel economy than any carbureated system can. There were millions of cars built with this and other variations of the Bosch fuel injection system, it is not as bad as some people make it out to be. No system can survive on old, rotten fuel, not even with a carburetor. Another point, if you take your car in for service at a Delorean vendor, they may not be able to help you much with that carburetor. In the end it is your car and you can do whatever you wish to it. Just understand all of the ramifications of any changes.
Lou and "Boo"
10-27-2015, 04:50 PM
Now lets not scare people off to carberation either. It's a healthy, reliable, non-invasive and completely reversible alternative. I'm not saying one is better than the other, just different.
Look David, I am not trying to start anything up but if she goes to a vendor shop for a clutch or brakes, I don't think the carb would pose an issue.
Everyone can preach what they want. Admittedly the carb does make the car non-original and reduces the value of a resale, but that's not what all owners are in this for. It's not about the cash value of the car to everyone. Also, as you well know, the fuel delivery system can be easily switched back.
The debate about fuel delivery isn't what this thread was about. Please continue to help the owner fix her kjet and if she decides to do otherwise, she will. If she is truly concerned about carberation being a bad decision, she can post concerns here or PM you directly.
Choices .... Life is full of them.
David T
10-27-2015, 05:26 PM
Now lets not scare people off to carberation either. It's a healthy, reliable, non-invasive and completely reversible alternative. I'm not saying one is better than the other, just different.
Look David, I am not trying to start anything up but if she goes to a vendor shop for a clutch or brakes, I don't think the carb would pose an issue.
Everyone can preach what they want. Admittedly the carb does make the car non-original and reduces the value of a resale, but that's not what all owners are in this for. It's not about the cash value of the car to everyone. Also, as you well know, the fuel delivery system can be easily switched back.
The debate about fuel delivery isn't what this thread was about. Please continue to help the owner fix her kjet and if she decides to do otherwise, she will. If she is truly concerned about carberation being a bad decision, she can post concerns here or PM you directly.
Choices .... Life is full of them.
Life IS full of choices but it is best to make them fully informed. I forgot to add, depending on what State you live in, you may not pass emissions testing with that carb. I wasn't the one that brought up the issue of carbs but I thought, since the poster is not as knowledgeable as you and I, I would mention some of the problems that have to be dealt with if doing such a conversion. Of course a carburetor would not be an issue if car is in for brakes but how about if the car has a problem stumbling during warm-up?
Lou and "Boo"
10-27-2015, 05:34 PM
I understand but your opinion, like mine, is biased. What about the downfalls of kjet being presented? Also almost any shop that understands fuel injection (electronic or mechanical) should know carberation.
Good point about emissions though, not an issue in NY with a car as old as this. But in Mew Mexico it could be an issue.
Let's please agree to disagree and continue to inform the owner on how to fix her kjet.
DMCVegas
10-27-2015, 05:44 PM
Honestly, you're both right!
See now, that is precisely what started that original fight. I wanted carbs, and sought Bill out to discuss what a conversion entails. He'd already done one, and I've never even touched a carburetor in my life. Only dealt with Fuel Injection. My goal for a carburetor conversion was not only to explore the possibility of one for myself and others, but to actually standardize the procedure as a commonly accepted modification. What I wanted was an actual "How-To Guide" that entailed all of the following:
What parts, and part numbers were required for said conversion.
What modifications were needed for the throttle assembly.
What are the PSI Specifications for the new Fuel System.
Where can manifolds be sorted from?
Which manifold type and number of carbs are options to be used?
If converting a CIS manifold, measurements and templates should be included, along with instructions to allow ANY aluminum fabricator to perform the modification.
What is the tuning procedure?
For the sake of "originality", yes, a carburetor can absolutely be the type of modification that can drive the price down, yes. BUT, if we had a community approved, accepted, and standardized conversion process that was well-documented, that could greatly offset, if not eliminate the devaluing of the car. No longer would a carburetor conversion be a "one-off" mod, it could be a common practice with a certain set of standards.
The problem then was Bill saw that as a threat. Because that meant that I was going to be Prometheus and give fire to everyone for free, and he wouldn't be needed any longer. He wouldn't be the "go-to guy" any more for carb conversions. He then spoke of how he would drive anywhere to help an owner or whatnot, and I just told him that I didn't want that. I wanted this to be something that an owner, hundreds of miles away from any mechanics, could easily do on their own. That did not sit well, and the attitude changed.
So then when it came to tuning the carburetor, that's when the vulnerable spot opened up. Hot Rod magazine for instance recommends the use of an O2 Sensor and a meter like the LM-1 or other wide-band electronic gauges. I wanted this method to be used since it was not only tried and true information from professionals, but with the now abandoned O2 bung in the exhaust system, we had the perfect opportunity for this set up without any further modifications.
So then I got attacked for not being "smart enough" to tune a carb by ear, with a sub-attack on not only K-Jetronic but the car itself referring to the DeLorean as "stupid" and other derogatory terms (which Bill does quite allot). I not only rebuffed such statements, but offered up data that backed my opinion. So then the strawman argument of being accused as a "purist" suddenly reared up. And make no mistake, this was a huge melee involving several people. Anyone who so much as questioned Bill immediately got lumped in with me, and a few trolls who simply thought the whole thing was "good fun" just jumped into the fight for a few lulz.
Now admittedly, we've strayed off-topic here a great deal. Absolutely we should get back to the subject of helping this owner out. But I don't want them being intimidated by anyone, nor getting the wrong idea about people and things. That was my whole point with that very first post telling them to stop what they were doing right now. Not only to avoid costly repairs, but for a potential engine fire since they were already leaking gasoline everywhere.
I'm not Bill. I'm not the only source for information. Somethings I may not know about. Other times it might just be that I'm not the kind of personality you want to deal with. I'm brash, and I use copious amounts of profanity in person. Perhaps you don't like my hair. I dunno. But I at least think that everyone deserves the freedom to seek out information as they need to without being bullied.
Now, let's get back to finding out about this car's fuel system...
Lou and "Boo"
10-27-2015, 06:04 PM
When I got Bill's setup, I installed it myself without any mechanic's help and his attitude toward me wasn't any different, in fact he wanted to come see me and my car so we did his ground bus mod.
Personalities can clash but the basics of why I went carb lie in the fact that an owner who lives literally up the block from me said "putting a carberator on my car was the best thing I ever did, no matter how much time and money went into the kjet, I'd go get some donuts and come out and the car wouldn't start. What an embarrassment."
He did not use Bill's setup but fabricated his own manifold.
If personalities let me get discouraged I would have never seeked David T's advice on other car issues. The first time we met at a DMA event he was very 'standoffish' and unwelcoming to me because I had the "Robertson setup" as he called it. Strangely Rick Roosa was there with his Robertson setup but didn't get the avoidance I got. I have nothing thing against David personally, he has given me great advice on various issues as I have mentioned.
Either way, I agree that we need to get past out differences, love our cars, and help each other regardless of how we put gas in our cylinders. I am proud to have Bill's carb, while others may not feel that way. But with only one exception, every owner I've met has had issues with their kjet. And hey, even carberators need loving too.
David brings up good points about resale value (although the kjet can be put back on if a sale is desired) and especially about emissions testing. So Rachel, check your emissions exemption laws before committing to carberation. My car is a bit stinky, (no catalyst) that's why I have "Dirty Mouth" on the rear side glass across from my racing credits to Bill Robertson, Tom Neiland and Dave Delman.
And yes Robert, you are more than a bit harsh.
Also, Bill wouldn't sell me anything until I did extensive research on fuel delivery systems for the D, he was certainly NOT trying to bully me into any decision.
Peace ! <- it's what we ALL need
Lou and "Boo"
10-27-2015, 06:14 PM
Kudos David for getting this thread back on track !
I always was told the fuel distributor would need replacement at a cost of $800 for that part alone. But I would think if she can drive her car the fuel distributor probably isn't clogged.
FWIW: I kept my kjet in case one day I wanted to make the car original again, but the entire setup was submerged in salt water in Sandy. Now it's pretty much useless. Unless someone wants to buy it for research, a wall hanging, an unusually large and cumbersome paperweight... I don't know !!! Make an offer, I won't ask you what you're going to do with it. LOL
;)
DMCVegas
10-27-2015, 07:06 PM
I always was told the fuel distributor would need replacement at a cost of $800 for that part alone. But I would think if she can drive her car the fuel distributor probably isn't clogged.
Out of curiosity, where did that quote come from? DMCH lists is as $495 on their site. Pelican Auto and other Porsche and Ferrari sites also have threads about how to disassemble and rebuilt your entire distributor yourself as well for a fraction of the cost. Granted though, that's a much, MUCH more advanced repair that I wouldn't casually toss out to just anyone. If needed, this car's distributor just sounds like it just needs to be soaked if anything.
The interesting thing about K-Jetronic CIS is that before the rise of EFI and subsequent turnkey systems, allot of oldschool semi-pro sand rails, dune buggies, and offroad trucks (high speed or rock crawlers) would sometimes graft K-Jet or Hilborn CIS fuel injection systems onto their engines from junkyard Peugeots and Mercedes. Unlike carburetors they can operate at much, MUCH more extreme angles, can take sudden acceleration better, and even be jumped with no problem because there is no bowl to slosh fuel out of. So if you were crawling around boulders at nasty angles, or even jumping at high speeds across the desert, CIS would keep on going and not starve the engine to rob it of power. Rather important during a competition. I know that some carb manufacturers have introduced alternate carbs for extreme angles, as well as relocated bowls for acceleration. But nothing is as superior to Fuel Injection, nor as reliable as mechanical when it comes being able to practically operate upside down as opposed to just extended degrees of angles.
The only design problem I've ever had with the DeLorean was the pickup hose collapsing. which was remedied by eliminating the hose and relocating the baffle (or you can opt for the DMCH all-in-on pump/sender unit). And the only other "failure" with the system was my own fault of trying to run a cocktail of alcohol and B12 Chemtool through the fuel system to clean the injectors. It kinda did, but it also compromised the rubber O-ring on the Primary Pressure Regulator. That threw-off the entire mixture and the car ran like crap. After I replaced it, she fired right back up and ran like nothing ever happened.
*technicly* the emissions on the car *should* pass. HOWEVER, if the vacuum diagram does not match up with what is on the car, some smog techs might actually fail you for that.
As for Bill, his attitude will change depending upon how much use he has for you. Totally cordial with me for many years, not happy when I told him that I had no desire for people to come to my house, and then as soon as I literally said that he shouldn't be the only source for carburetors, he turned on me like a wild animal. Nothing of value was lost when than happened. It's just a repeated process over and over again. It happened with Louie, it happened with me, it now happened with Chad, and who knows who is next... And that is about all there is to say about that.
And yes Robert, you are more than a bit harsh.
http://www.quickmeme.com/img/3d/3de4c0e02f5f238610de9062ec468aad8ddd38dfd825fdce63 2fe47116791901.jpg
Lou and "Boo"
10-27-2015, 07:11 PM
Honestly , I don't know. Maybe my number was wrong. Maybe it WAS something like $400 for the distributor. It was so many years ago.
I guess it's a good thing I don't take my car off-road. ;)
And being a jerk is ALWAYS a choice. I regretably have chosen to be one at times.
Bill has no USE for me at all, but he's never given up on me. We have had arguments, and gotten past them.
DMCVegas
10-27-2015, 07:18 PM
And being a jerk is ALWAYS a choice. I regretably have chosen to be one at times.
https://static.spiceworks.com/attachments/post/0015/5567/Hey-Wait-A-Minute-300x170_preview.jpg
Wait a minute... Are you calling me a jerk?
Lou and "Boo"
10-27-2015, 07:32 PM
https://static.spiceworks.com/attachments/post/0015/5567/Hey-Wait-A-Minute-300x170_preview.jpg
Wait a minute... Are you calling me a jerk?
Sorry, I must have spelt 'thug' wrong.
;)
Jonathan
10-27-2015, 07:34 PM
My take on BOTH forums is that they each have an abundance of people that MUST get the last word in. This, to me, is the single reason why most any subject (carburetors, BTTF conversions, religion, politics, etc.) can and does degenerate and spiral out of control from time to time. We don't need a DeLorean as the forum image, we need a picture of a frickin' Penrose Staircase.
37608
One of our most respected vendors said to me one day that the best advice they ever heard was to NEVER get into a debate or argument on the Internet because you can NEVER win. And yet that seems to be what constantly happens here. We hear ourselves say to agree to disagree, yet that's never how it unfolds.
Here's another good piece of advice: Be Positive or Be Quiet.
Lou and "Boo"
10-27-2015, 08:21 PM
+1
The advice I was always given here was "learn to ignore".
Well, I was biting my tongue since I kept reading "let's get back on track", etc, etc, but, as usual, it never happened.
So my $.02 along with a heads up:
As for Bill, his attitude will change depending upon how much use he has for you. Totally cordial with me for many years, not happy when I told him that I had no desire for people to come to my house, and then as soon as I literally said that he shouldn't be the only source for carburetors, he turned on me like a wild animal. Nothing of value was lost when than happened. It's just a repeated process over and over again. It happened with Louie, it happened with me, it now happened with Chad, and who knows who is next... And that is about all there is to say about that.
+1 !!!
I can think of at least 4 more to add to that list, not including myself.
Most significant is Dave -- Who can say one single thing against Bitsy, but Bill? RE: Typical Bill HERE (http://www.dmctoday.com/showthread.php?284-How-to-Upgrade-to-High-Energy-Ignition-(HEI)&p=36050&viewfull=1#post36050) ...and he get a pass.
NUFF said.
DMCVegas
10-27-2015, 09:41 PM
Again, it should be split to a different thread so that we can continue to help this owner.
Banter is just that: banter. I myself try and keep conversations as realistic as possible. And normal conversations segue from one topic to another. And sometimes they just turn out to be fun joking around is all. It's not about having to get the last word in at all. At least not for me. If I'm corrected on something, sure, I'm going to respond to at least acknowledge that. Just ignoring it makes me look rather bitter like I DON'T want to admit to anything. Which is exactly why I'm responding to you now.
And again it's why I try and keep the conversations as realistic as possible. You're reading words. I've no idea whose voice you're reading this in, but certainly you cannot hear the inflection in my words to help you understand the tone or meaning. Ie am I being direct, or sarcastic? Am I being sincere or dismissive? Hey, you can't even see my body language either. Despite our abilities of mass communication, this is of course the biggest drawback to pure text communications. You can read the words that someone writes, but the personal connection to interpret them beyond face value is totally missing. Never mind that we're a global website, even things such as regional traits and even certain types of senses of humor can come into play that you sometimes cannot relate to, let alone get the clues about.
And as for "arguing on the internet", well, that just depends upon whom you're talking to. Personally, I'd rather be factually wrong than "win", because that benefits no one. More than once I've had my opinion on something changed, and I've admitted when I've been wrong. Many, hell, MOST people do not know how to do this. Being wrong isn't a sign of weakness. Refusing to admit you're wrong is. But it's not the internet as a whole without exception, no.
Here's another good piece of advice: Be Positive or Be Quiet.
I totally disagree with that, and I'll tell you why:
The second year of ownership I stated that I owned the DeLorean from Hell. I had lots and lots of problems with the car. Lots were caused by past mechanics through either incompetency or neglect. The rest of it was just the pitfalls of owning a (then) 20 year old car with worn parts. And I had other owners that commented to me, both indirectly as well as directly, that perhaps the biggest problem with my car wasn't the car, but perhaps me not taking proper care of it. And you know something? They were right! I was a shitty owner! It didn't' matter that I took other people's words for it about repairs, or that I was having to clean up the messes of other people or whatever else. I had ducked away from the responsibility that I now have a two-decade old used car, and that I needed to treat it as such. Is the DeLorean a bad car because the original water hoses split and overheated? No. That's my fault for not replacing them myself. Did the past mechanics do shitty work? Yup, but that still doesn't mean that I shouldn't have spot-checked their work and instead have taken it all at face value (ethically speaking, not legally). I needed to stop treating my car as brand-new, and needed to start inspecting it for problems and completing the deferred maintenance that needed to be done. Amazingly enough, that seemed to cure a whole lot of ills. Whodathunkit?!
Was it "positive" to tell me that the problems with my car were my fault? Absolutely not. But it certainly made me a better owner and made for a MUCH more pleasurable experience. And if I see others going down certain paths, I don't think that it's right to not say something that could help them avoid pitfalls in order to only say something positive so that I can be all nicer-nice. Better you be mad at me for being an asshole than the car and the marque for letting you down.
Lou and "Boo"
10-27-2015, 09:46 PM
I like those thoughts Robert... :thumbup:
I took the comment as "don't be negative to someone on purpose", or maybe it's better said "don't be purposely negative"
And if your post is true, you may have to change your signature. JK ;)
dn010
10-27-2015, 09:47 PM
Pretty much everything since post #23 is useless - which I'm also guilty of posting nonsense. the OP has the information she needs, lets let her get back to us with any further issues that she may need help with and end all this nonsense that helps no one.
Andrew
10-28-2015, 01:59 AM
First of all, there are good people on both forums. Furthermore forum membership is not mutualllymutually exclusive. I for one am a member of both forums and have found both to be both informative and helpful on various issues.
With that said Today does have a larger concentration of Carb owners for a number of reasons. Carburation is an option with advantages in terms of simplicity and ease of maintenance. This can be a critical factor when one is hundreds of miles from a DMC vendor. Carb also provides the option of a low pressure mechanical pump thus reducing the electrical aspect of the fuel system two one wires..
As with so many other aspects of life, making a well informed decision is critical. Personally I wish carburation had been a known option back in 1998 when I purchased my first DeLorean!
While deviation from stock will likely impact resale value, a typical carb conversion does not require any permanent modifications save for a throttle cable mod. Thus the car could be converted back to stock if desired. Furthermore a running, carbed DeLorean is likely more valuable than a non-running K-jet car....it is certainly more fun!
Soundkillr
10-28-2015, 09:34 AM
Split this thread (as requested)
Looks like everyone got it sorted out without some stupid turf war, so thank you for that. Well played guys! Basically split to clean the other thread. Would love to see this one die......
:)
Would love to see this one die......
:)It probably will -- The damage is done and everything has been repeated (for the millionth time).
P.S. Damned if you do, damned if you don't -- Good call!
DMCVegas
10-28-2015, 12:09 PM
I like those thoughts Robert... :thumbup:
I took the comment as "don't be negative to someone on purpose", or maybe it's better said "don't be purposely negative"
And if your post is true, you may have to change your signature. JK ;)
Thank you, and agreed. Something like a reality check or bad news may not always sound positive, but you're not being purposefully negative. Absolutely.
Nope. This was way back about 14 years ago. My car hasn't run in about 10 years. Being bleary-eyed and tired, I skipped properly burping the cooling system so that I could just go home. That finally killed the car to where it just poured steam out and was drinking almost 2 gallons of coolant a week. Life then happened as they say, and I just didn't have time for it with the bouncing around between 3 states, and then just working long shifts and being so tired. So it's just been stored. To tell the truth, I haven't even laid eyes on that car in 4½ years, and it'll probably be another 2 or so before I ever see it. Assuming nothing happens to me and I don't die within that timespan, which then means that I'll never see it again.
It needs to be fully sorted out though. But my one option is to break out my spare DeLorean engine, shave some 3.0L heads with some performance cams, drill the heads to mount the 2.8L ignition distributor, and then install a nice aftermarket exhaust. Or I've been leaning towards gutting the drivetrain, raiding the kit car bins, and dropping in a 3.5L Ford EcoBoost with a Porsche 6-Speed transaxle in the back. Just to be done with it. I'll have to see where life takes me...
Split this thread (as requested)
Looks like everyone got it sorted out without some stupid turf war, so thank you for that. Well played guys! Basically split to clean the other thread. Would love to see this one die......
:)
As I said before, it just depends upon who all you're engaging. It is the difference between debating and learning, and simply winning an argument at any cost, subject be damned.
mr_maxime
10-28-2015, 08:26 PM
Does EFI require permanent modifications and how does it affect resale value vs a carburated car?
dn010
10-28-2015, 08:29 PM
EFI involves a lot of wiring and splicing into the stock system. Anything can be converted back, but it would be a real hassle.
I should add that it depends a lot on how the conversion was done and what features you are using. In my conversion, I did not hack all the old wiring out. I do not need any of the stock ECU connections and I have seen many people cut them out both during EFI and Carb swaps. I opted to leave them intact not knowing what the future may bring. I've also documented all of the wiring changes and tried my best to leave enough room on any wire cut so that it could be returned back to stock should the need arise.
As far as converting the engine back to stock, I do not want to speculate since I am not using the original engine so I will leave no comment.
I also do not know how EFI conversion effects resale - but I don't plan to ever sell so I guess I won't have to worry...
Sent from my XT1254 using Tapatalk
Rich_NYS
10-28-2015, 09:34 PM
I also do not know how EFI conversion effects resale - but I don't plan to ever sell so I guess I won't have to worry...
That's the part that makes sense to me. I didn't do any modifications to my first DeLorean, only invested in things to make it mechanically sound & reliable because I always intended to sell it.
The one I have now I plan to keep; it currently has a carb conversion, but I have the K-Jet parts and will return to original if I don't like the carb.
Rich_NYS
10-28-2015, 10:55 PM
To quote Loo and "Boo"'s posting over there: "There's also DMC Talk for info, but many members there leave a lot to be desired. Going on DMC Talk is like going to an all male nude beach , there are dicks everywhere!.
LOL....that's a pretty funny expression, but I wouldn't say there are dicks everywhere. There are a few, but not too many.
Lou and "Boo"
10-28-2015, 11:17 PM
LOL....that's a pretty funny expression, but I wouldn't say there are dicks everywhere. There are a few, but not too many.
They sure haven't popped up in my most recent experiences here.
As I wrote over on today, I never really gave the kjet a chance on my car but I think I made a good decision with my usage. Other than the decision to store the kjet in the basement and then...along came Sandy..
Here's my story ... (copied from Today)
I understand about keeping a car original for reasons of cash value but I am not looking to sell it and I kept the kjet so I 'could' switch it back like Rich said but I guess now that the kjet setup was submerged in Sandy's salt water it's pretty much useless.
Also, the problem with kjet as said by David Teitelbaum himself in our latest interaction on Rachel's post on Talk, is when a car sits for a while. This is exactly my situation with Boo. Yes I drive her on weekends but she may sit for months at a time and I need her to start right up and behave when I turn that key. In hindsight, I probably would have paid the same to restore my stock kjet which would have made the car more valuable In The long run but I would be having trouble with it year after year, spending money and more importantly getting frustrated with the car. Just as Lou Costa Sr. Said to me "the carberator is the best thing I did to the car. Just when it was running right with the kjet then I'd go get donuts on a Sunday and come out to the parking lot and the thing wouldn't start. Now it starts every time."
That statement will forever be in my head because that's what made my mind up so I never even tried my kjet( probably wouldn't have worked after sitting under a tree for fifteen years and seeing the thick sludge in the gas tank) so I never even bought a new fuel pump (original was deteriorated beyond belief- corrosion all over it)-(the PO did crank the engine with a low batter so I knew it wasn't seized) I just went with Bill's low pressure fuel pump and carb kit from the get go.
Lou and "Boo"
10-28-2015, 11:20 PM
And I wouldn't call this a 'Rant' but rather a discussion on fuel delivery methods.
mr_maxime
10-29-2015, 12:26 AM
So why do people carburate their delorean? Easier and cheaper than maintaining Kjet or going EFI? Im rather new to working on cars and don't fully understand the differences. From my understanding, you tune a carburator mechanically, you tune EFI with a laptop and cant really tune Kjet. Then carburator cars tend to smell more like fuel.
And I wouldn't call this a 'Rant' but rather a discussion on fuel delivery methods.
Just saying-
Top Definition. rant. To speak aggressively about something. or to take you own tangent about a subject.
I hope the below doesn't indicate she sees it more like this definition:
37635
3-4 hours after the split.
So why do people carburate their delorean? Easier and cheaper than maintaining Kjet or going EFI? Im rather new to working on cars and don't fully understand the differences. From my understanding, you tune a carburator mechanically, you tune EFI with a laptop and cant really tune Kjet. Then carburator cars tend to smell more like fuel.
I think most convert to carbs because it is a quick fix to get it on road quickly with something they understand (or can afford at the moment). K-Jet is an animal all of its own and one has to devote a little study to reap its benefits...or get a little help, which is readily available from a lot of people here.
Basically speaking, if you don't let one sit long periods, a fresh/well maintained K-Jet setup is as reliable and shouldn't need maintenance more often than a carb setup. They are not as forgiving as most carbs, which are much simpler and cheaper. Carbs are "older" technology and can't control fuel delivery as well as K-Jet, nor it as well as EFI for the same reason. As far as cost goes, the later the technology, the sooner you get your "fuel money" back (over time).
K-Jet gets a bum rap due to DeLorean electrical systems, imho...lots of other cars use it w/o the rep. Same from people who throw parts and cross their fingers at what they don't understand.
Maybe this will help with the differences:
Most carbs work independent of the other systems (ignition, cooling, etc). Basically the more air drawn through, the more fuel it delivers. They have a mechanical spray pump to prime the engine, and, enrich the fuel to help initial acceleration; and a choke plate, which restricts the air as it is drawn in while the engine is cold, again to make it richer. Usually, a heat sensitive coil spring controls the coil's position. Everything is accomplished mechanically (except the choke heater on later models).
K-Jet replaces the spray pump with an electrically controlled Cold Start Valve to prime cold engines. It is activated when the starter is activated AND a temperature sensitive switch allows it. The Warm Up Regulator, AKA Control Pressure Regulator, (WUR/CPR), replaces the Choke. Basically it has a temperature sensitive valve that causes pressure to the fuel distributor to increase when the engine is cold. It takes over the spray pumps job on initial acceleration too, but only when cold. A Frequency Valve also adjust the pressure via input from an 02 sensor to maintain proper Air Fuel Ratio. Adjustments to air intake is made by an Idle Speed Motor, which has it's own ECU, which monitors the RPM. Which leaves the mechanical parts, a metering plate that operates a "plunger" with slits for fuel to constantly pass through to the individual spring loaded injectors. The injectors atomize the fuel better. As you can see, a lot of it is simply doing the same thing but accomplishing it in a different way, which has the benefit of allowing additional input and finer control.
EFI goes to the next level (we're omitting throttle body injection here). Basically, ambient air, crank positions and cam positions are monitored, the sensors and ECUs are integrated, and injectors are much more advanced. The injectors are individually activated at the precise moment the fuel is needed, instead of constantly spraying, piling it up above the intake valve.
Basically all three would be normally pre-tuned at the factory. Carbs have adjustments for idle speed and AFR, if you remove the tamper proof caps. Most anything else requires opening one up. AFR can be adjusted on K-Jet, if you remove its tamper proof plug -- It's set to a given value using a dwell meter and the rest is handled automatically from there. EFI rarely needs any adjustment for a stock setup (unless you want to defeat performance restrictions etc). But for a D there is no such thing, which brings up one of the great EFI advantages- you can take control of most of the inputs and how they are handled. And with the more advanced systems, you can go from performance to, economy, etc on the fly.
(Again, this is over simplified and things are left out to show the peaks at once...valleys, nooks, and crannies can be found in the manuals located in the Resource Section here. Or just ask ;-)
LOL RE: Previous post
you => your
dn010
10-29-2015, 10:16 AM
I spent over 10 years with K-jet and had my share of issues but in the end (and after replacing every component) it was still running and K-Jet NEVER left me stranded, ever! Even when it was running rough.
I'd say going carb is cheaper, the biggest expense is the manifold. Once you've got your components, you install them, set them up and forget about it as long as it runs well. Very few things to go wrong and in my opinion carburetors are extremely reliable as long as they're used and don't gum up from sitting long periods of time with fuel in them.
EFI you need the ECU or ECUs, sensors, a laptop to tune everything with, software (extra $ if you want advanced features), know-how when it comes to wiring what/where, and a lot of patience when it comes to tuning. It is a lot more involved and I've heard of people attempting this only to get overwhelmed and the car just sits longer. With EFI, you have total control of what the timing will be, what fuel amounts will be injected, etc. - it isn't based mechanically which means you can adjust whatever you want whenever you want on the fly. Engine not idling at the RPM you want? Click some keys to let the idle motor allow more/less air. Want your fans to turn on at a certain coolant temp? Click some keys and it's done. The list goes on. As far as reliability, it should be another thing to set up and forget about once it is running well, but there are more things to go wrong - sensors, ecus, and wiring however you can adjust for a bad sensor, and even the ignition system has a limp home mode.
I was going to go carb many, many years ago but to find a manifold back then (DML days) was rare. This was before anyone was welding their own carburetor manifolds. This was also before "conversions" were a regular topic, back then very few had been done and I wanted to do something different with my car.
Then I ended up with an EFI motor. The way it worked out for me, it was too easy for me not to go the EFI route instead.
dn010
10-29-2015, 11:43 AM
Also, you can read the threads under the specific titles EFI or Carb in the Custom Mods section of the forum. In those you'll find threads like "Why EFI" or "Why I Carbed" which can give you a better understanding.
DMCVegas
10-29-2015, 01:05 PM
So why do people carburate their delorean? Easier and cheaper than maintaining Kjet or going EFI? Im rather new to working on cars and don't fully understand the differences. From my understanding, you tune a carburator mechanically, you tune EFI with a laptop and cant really tune Kjet. Then carburator cars tend to smell more like fuel.
Taking into account what everyone else said (which is all great info BTW), let me start with the direct, simple answer:
People prefer Carburetors sometimes simply because it is the most familiar thing to them.
But admittedly it does also go a bit deeper than that. That is where we start to get into the culture of Shadetree Mechanics, and allot of confusion and widely held inaccuracies believed to be truth because they're repeated over and over again so often. From here it's gonna be a bit of a long post, but I will try to keep it as condensed as possible, and on point.
Fuel Delivery System Explanations
First thing you've got to understand is that there are really only 2 types of fuel delivery methods out there: Carburetors and Fuel Injection. That's it.
The quick rundown on Fuel Injection is that it is broken down into 2 specific control system types, and 3 distinct injection types. The two control types are either Mechanical, or Electronic. K-Jetronic is of course mechanical. In order to properly deliver the correct amount of fuel, it relies upon physical meters such as the airflow plate and perhaps engine vacuum depending upon models. Electronic is just that. It, using the example of the aforementioned mechanical meters, would instead use solid state components such as Mass Airflow Sensors (MAF) and Manifold Absolute Pressure Sensors (MAP). The same job gets completed just using different probes (mechanical vs. solid state electronics). Note: Some mechanical fuel injection systems (usually only gasoline) also spray continuously and never shut off their injectors. This is called Continuous Injection Systems or CIS.
The 3 Distinct Injection Types are either going to be Throttle Body (aka TBI, this is where the Injectors are mounted before the intake manifold where the carburetor would go) Multiport (The injectors are mounted either in the Intake Manifold or within the cylinder head like the PRV, and spray directly down onto the intake valves outside of the combustion chamber), and finally Direct Injection (the fuel injectors are actually mounted inside of the combustion chamber itself).
With a quick detour to explain Carburetors, they are of course mechanical fuel delivery systems. They rely upon engine vacuum to suck gasoline mist out of their venturi jets. The higher the vacuum, the more fuel gets sucked out to match the airflow to try and keep that perfect gasoline ratio.
Anything beyond this from "Quadrajet", "MFI", "Sequental Port", to "Cross Fire", or whatever else is just cutesy marketing names by those particular manufacturers. Subaru slaps a turbo on a GDI engine the same as Ford does, but Ford just calls it an EcoBoost to make theirs sound better. Same theories on the same engines.
Fuel Mixtures & Emissions Tuning
Focusing on gasoline here, the ideal Air to Fuel ration is 14.7:1 That means 14.7 parts of atmospheric air to 1 part atomized gasoline. This creates the ideal burn inside of a combustion chamber where we have a nice balance between obtaining as much power as possible, and burning as much fuel completely as we can, and ending up with as low of an emissions rate as possible as well.
If a fuel mixture is too rich, meaning too much fuel to that air ratio, you run the risk of what is called "Washing out your cylinders". As the pistons go up and down, they slide on top of a thin film of engine oil. Lubrication 101. However, gasoline is a solvent. So if too much is sprayed onto the cylinder walls, it can actually wash that protective film of lubrication off. That means that the pistons will start to scratch and score the cylinder walls, and will damage the engine internals permanently. That of course is in an extreme case. However, you also have to understand that you only have a split second to burn fuel when the spark hits it. Too much fuel, and you're literally pouring raw gasoline out of the tailpipe. Aside from damage to the catalytic converter, you also see rapid declines in fuel economy and increased emissions in the form of CO and raw HydroCarbons. Not to mention nasty carbon build up on the valves that don't allow them to seal properly (resulting in poor performance), and on the pistons where we have pre-detonation. Then you have to start using higher octane fuels to avoid that, and fuel prices shoot up on you even higher.
So yeah, if you're wondering why most carburetors have a more "gasoline smell", there you go. Oh, and also because they tend to leak out fuel vapors that can fill up your garage too since the bowls aren't totally sealed off from the atmosphere when the car is at rest.
But what if the ratio is too lean? Liquid fuel also has a bit of a cooling property to a point. If the mixture is too lean, in some cases we can cause internal damage to the engine from that heat. However, more often than not, we actually get increased emissions. This flies in the face of common logic, I know. The idea of having worse emissions by burning LESS fuel seems preposterous, but it's absolutely true. How? The air you breath and that your engine consumes isn't pure oxygen. There are other gasses mixed in with it, like the inert Nitrogen. Just as not all of the fuel can be burned in a combustion chamber, neither is all of the oxygen. Which of course is in a much higher quantity along with Nitrogen. When Oxygen and Nitrogen get together under high temperatures, they can bond. When that happens, they form Mono-Nitrogen-Oxides of either NO or NO2. Emissions testing just normally lumps these into the same categories on your exhaust gas analysis as NOx readings. Getting right to the point, large quantities of Nitrogen-Oxides have a one-two punch of being both a greenhouse gas, as well as when combined with water vapor they lower it's pH and will cause Acid Rain in clouds that kills trees and makes lake waters more acidic. So if you're pumping in excessive amounts of Oxygen and Nitrogen beyond what you're combustion chamber is designed for (running lean), you actually shoot your emissions levels WAY up!
You ever saw some tuner chips or performance programmers that say shit like, "Yo dawg! Increase the mileage on yo car!" or "Hey Bro! Tow even more loads with your truck! USA! USA!" and wondered how any of that's possible? Right there is your answer. You get that better fuel economy by running your engine too lean and shooting the NOx emissions through the roof. You know that whole scandal with VW's diesel engines? Same exact thing.
Performance Building of Fuel Delivery Systems
Ok, so we've talked about emissions tuning. You've got that. But it was also mentioned about how you can't tune K-Jetronic, or how you specifically need a laptop to tune EFI. So let's start with that.
First and foremost about tuning is that the more power you make, the more fuel you're gonna need to feed the cylinders. That is true to a certain extent. As we have moved from Carbs, to Fuel Injection, and then better controlled combustion with EFI through better fuel maps and injector relocation, that helped extract more power from the same amount of fuel, sure. But still, what of performance building of fuel delivery systems?
Again, if you're gonna make more power, you usually need more fuel. Stock fuel delivery systems can really only go so far, and then you have to start modifying components, or just outright replacing the whole system. This absolutely applies to both carburetors to modern fuel injection equally! Make no mistake about it! With carbs, you may have to install bigger jets. But beyond that, you're gonna need to switch from a 2 BBL to a 4BBL or whatever carburetors and replace them with ones that have higher CFM ratings, and even install a higher-flow fuel pump back in the tank. Subsequently you STILL end up rebuilding your entire fuel delivery system entirely.
EFI? Again, you've only got a certain range in which you can operate. If you modify an engine beyond the system's capacity, you're going to have to start installing larger injectors, possibly larger fuel rails, and higher flow pumps. Again, same exact process, just different parts.
What about K-Jetronic? Same thing. BOSCH simply tuned a K-Jet system to work with the PRV for US emissions. Just as they've done with Modern EFI systems, and we're just in the same boat. That's it. I mean, Porsche, Mercedes, Ferrari, and even Lamborghini use K-Jetronic too, what's their massive secrets to high-performance cars with this same system? Simple: They use the same exact system that we do, which entails the same exact components, but they just have HIGHER flow rates for fuel delivery! Honestly, if you had a turbo, or a supercharged PRV that needed beyond what the stock DeLorean incarnation of EFI could deliver, you'd just need to figure out what it's needs were, and then cross-shop that specifications of other K-Jetronic systems and bolt the components onto the DeLorean.
So when you think about it, is K-Jetronic really impossible to be suited for a performance application? Or is it just that no one has bothered to do the research?
Self Tuning, & other Myths about Fuel Injection vs Carburetors from Shadetree Mechanic Culture
Ah yes. This is the big one where I start to get my ass reamed out as an elitist. So before we continue, I'm just going to give the disclaimer that I am not knocking anyone down, but I am just telling you what my observations about shadetree mechanic culture have been, and why it prefers carburetors. Moving on...
Myth: "You don't need fancy meters to tune a carburetor! All ya need is a screwdriver and a good ear! ANYONE can tune a carburetor by ear!"
Truth: That is a LIE! You still need an exhaust gas analyzer to tune a carburetor! Oh sure, you can get an engine running, but you've not actually tuned it at all. You're emissions are still screwed up, and you still risk long-tern engine problems from damage to nasty carbon deposits on the valves from the excess fuel being pumped in. As Hot Rod Magazine once explained, you still must tune the carburetor for both partial throttle to compensate for the idle circuit, as well as WOT for when you open secondary valves. It of course helps the engine run clean, as well as actually maximizes power.
Now compare that to K-Jetronic where all we do is simply adjust a single screw at idle on a warm engine, and then the system takes over the rest from there thanks to equipment designed around predetermined calibrations. It doesn't really seem like Carburetors are all that advantageous.
Myth: Anyone can work on a Carburetor!
Fact: Anyone can work on K-Jetronic as well. In fact, anyone can work on ANYTHING. It just doesn't mean that they're gonna be good at it. Again, I would refer back to that last fact/truth discussion. Anyone has the ability to tinker, but knowing how to actually do something the right way is the tricky part.
Like I've said, I don't have a problem with carburetors. If it's what helps an owner get a car back on the road, or hell, if it's just what they prefer to run, there is nothing at all wrong with that. Not a damn thing. But I don't like the idea of people simply going off half-cocked about things the improper way. If you're going to switch over to a Carburetor, that is perfectly fine. But just do it the right way, and know how to properly tune it. And most of all, don't take your frustrations out on the K-Jetronic system. That's all I've ever asked.
There are advantages and disadvantages for both Carburetion and Fuel Injection alike. But the biggest problem is this archaic mentality against fuel injection and especially engine computers without actually understanding them. My father in-law is a perfect example. Carb guy, grew up on carbs, preferred them simply because "you could work on them", etc. Then we started talking cars one day. This was after he called me from under the hood of some ancient Ford pickup, asking me to look up a wiring schematic and instructions on how to polarize a generator for this thing. So we got to talking, and he was telling me about his old cars, and in particular this one old Dodge he and my MIL owned back in '79. He loved the car, but had to sell it because he was always having to go under the damn hood to dry out the distributor, or replace points, or something. And we were talking as he's out in the garage, and then he picks up an old timing light, and that's when it hit him about his last two trucks. He realized that other than regular maintenance and the occasional part failure, he hadn't had an ignition system failure in years. It had been even longer since he had to use that old timing light on ANY of his vehicles. He hadn't needed to adjust valves, set point gaps, or even replace wires. And in the case when he did have things like a bad fuel pump, he did have his OBD-II reader and made the comment about the check engine light and the error code that it had low fuel pressure. Just plugged the reader in. Didn't have to break out the fuel pressure gauge, or anything else. It was actually much easier to work on his modern truck than any of his old ones. And that's when he realized that he actually loved computers in cars because they had made things so much easier for him.
EFI is a closed system that just works and self-tunes because it uses it's own Oxygen Sensors as exhaust gas analyzers. You don't necessarily need a laptop per se to "tune" an engine, but you do need some sort of electronic interface device to go in to manually adjust settings instead of turning screws. Where as previously you would read the results of an exhaust gas analyzer and let it tell you which way to adjust a fuel ratio to meet your needs, engine computers now instead let you dictate to them what you want the parameters of the exhaust gas to be, and simply adjust things for you.
Like I said before, the preference of Carburetors over K-Jetronic or EFI has allot to do with the Shadetree culture. Myself personally, I didn't grow up with that culture. I was taught the basics of car repair by my mother, and then learned the rest of it on my DeLorean. I've never even touched a carburetor! I know how they work, but I've never pulled one apart! So personally, yes, I'm the opposite where I'm more familiar and thus comfortable with K-Jetronic. Carb guys and gals will tell you how much easier it is to work on a carb. Me? Hell, breaking out a damn fuel pressure gauge and an exhaust gas analyzer on a K-Jet system is something I'm more comfortable with, and thus seems easier because it's not as alien to me. Two sides of the same coin is all that is.
OverlandMan
10-29-2015, 01:22 PM
Anything beyond this from "Quadrajet", "MFI", "Sequental Port", to "Cross Fire", or whatever else is just cutesy marketing names by those particular manufacturers. Subaru slaps a turbo on a GDI engine the same as Ford does, but Ford just calls it an EcoBoost to make theirs sound better. Same theories on the same engines.
I may be wrong here but I think "Crossfire" was a GM setup for throttle body fuel injection in the 80s and 90s. I first recall seeing that term applied to the very late C3 Corvettes (circa 81-82 maybe?). I know some of the early C4 Corvettes has this setup.
Sorry not trying to digress... that was a tiny little sidebar.
Growing up as a kid in the 80s, I recall my Mom's 1986 Ford Aerostar minivan with it's "Computer-Controlled" carburetor. I believe the concept there was to replace the vacuum with a computer to control the fuel delivery from the carb to the intake. That thing was a piece of junk and never worked right. It left us stranded on the side of the road several times. I think Ford quickly pulled it within 6 months and replaced it with EFI or some other fuel injection.
Honestly though, I'm not ruling out a possible carb conversion if I can't get my K-Jet running properly. I'm not ready to give up though.
DMCVegas
10-29-2015, 03:33 PM
I may be wrong here but I think "Crossfire" was a GM setup for throttle body fuel injection in the 80s and 90s. I first recall seeing that term applied to the very late C3 Corvettes (circa 81-82 maybe?). I know some of the early C4 Corvettes has this setup.
Sorry not trying to digress... that was a tiny little sidebar.
Oh no, no need to apologize at all! Sharing ideas and things is all apart of the discussion!
You're absolutely correct. "Crossfire" was simply a dual TBI setup. But it's still just the branding of a a particular variation of EFI which is my exact point of not being intimidated by fancy marketing names of these systems.
TBI was the natural progression of EFI's Integration into engines that were already designed for carburetors. Compare for example the Carbureted PRV engines against the K-Jetronic. That was an EXPENSIVE leap forward in technology because it required the complete redesign of a brand new intake manifold (since the 2.7L heads required redesigns anyway for oil passage issues, I'll ignore that cost). That's a very expensive tooling cost. Compare that for example with simply removing the Carburetor, and instead mounting a carb-like jig with dual, high flow fuel injectors substituting for a 2BBL carb, along with integrated IAC valves to also electronically control idle speed based off of engine RPM. At most it would simply require the mounting of an O2 sensor, splicing into the existing wiring harness, and perhaps some vacuum rerouting to a MAP as well as a TPS to account for sudden massive fuel demands and then just a temperature probe in the coolant. You could keep using the same intake manifolds and save massive amounts on tooling. And that's just on the hundreds of thousands, if not millions of 4-cylinder engines that were going into economy cars, mid-range cars, and light trucks. Then when it came to things like the 305 engine, GM just further cut costs by designing a custom fuel map to accommodate dual TBIs and the V8's engine needs, and all they had to do then was retool an intake manifold for THAT car, and just call it a day!
Naturally as the older carb manifolds were phased out and new manifolds had to be designed, manufacturers gravitated towards the individual ports to meet increased demands for emissions and fuel economy. But you account for the bean counters to see how companies saved money on tooling and design, it makes much more sense.
Growing up as a kid in the 80s, I recall my Mom's 1986 Ford Aerostar minivan with it's "Computer-Controlled" carburetor. I believe the concept there was to replace the vacuum with a computer to control the fuel delivery from the carb to the intake. That thing was a piece of junk and never worked right. It left us stranded on the side of the road several times. I think Ford quickly pulled it within 6 months and replaced it with EFI or some other fuel injection.
Honestly though, I'm not ruling out a possible carb conversion if I can't get my K-Jet running properly. I'm not ready to give up though.
Right! And that is a type of add-on emissions control system (which by the way, Quadrajet is, so I shouldn't have listed it in that group. My bad.). The idea with that was to fine-tune the system. For instance, with K-Jetronic, it is a completely self-contained system. However, in order to meet stricter emissions regulations the LAMBDA-SOND system was introduced. K-Jet was modified accordingly to accommodate it, but what LAMBDA does is measure the O2 content in the exhaust to fine-tune the fuel mixtures to acheive clean emissions and better economy. The idea is that if the fuel mixture is too lean, the LAMBDA system detects this and increases the duty cycle of the Frequency Valve to lower fuel pressure in the lower chambers of the Fuel Distributor in order to raise pressure on the injectors to increase their output flow. If the mixture is too rich, than the process is completely reversed.
With Computer Controlled Carburetors, those operate under *almost* the same exact principal, depending upon manufacturer. There is an O2 sensor that controls either a frequency valve to starve or flood the carb bowls in relation to a somewhat fixed airflow based upon throttle position (Ford), or there is a rotary valve which is used to choke or open additional airflow in relation to a somewhat fixed fuel flow based upon throttle position to limit the amount of fuel that can pass through the venturi jets (Chrysler). GM I believe actually had complicated carbs that did BOTH. In either scenario here, we have been able to manipulate the Air to Fuel Ratio on the fly to better fine-tune emissions and performance.
Now if you REALLY want you mind blown, there is technically one more type of Fuel Injection system: CMFI, or Central Multipoint Fuel Injection. It was like someone at GM saw K-Jetronic and decided to modernize it with the Frequency Valve replacing the distributor chambers to directly feed the injectors. This then later on got replaced with 6 tiny injectors in the distributor controlling fuel to the poppet valves...which just gummed up. Eventually GM just said to hell with it, and moved the electronic injectors down to the nozzles instead to do away with the springs entirely. That final, far more reliuable iteration is called MPFI. Perhaps if you could fabricate up much longer fuel leads and adapters for the injectors it could be a beautiful choice for replacing K-Jet? But who knows.
As for your own potential conversion over to a carburetor, you gotta do what you gotta do. I will say too that one thing I didn't touch upon with Shadetree Culture is the mentality that you can just rebuild something, or throw parts at it to automaticly fix a problem. EFI and K-Jetronic are not as forgiving for both troubleshooting as incorrect tuning because they do NOT tolerate "shotgunning" repairs. I mean, you could have a problem with a carburetor, and then you could completely and utterly misdiagnose what the problem is. You could be totally wrong. BUT, you decided to rebuild the carburetor and then suddenly the problem goes away. Obviously, that didn't make you right in the least bit. But the car was tolerant of your incompetent troubleshooting simply because your shotgun repair literally repaired the right thing by complete accident despite you going after the totally wrong thing! The equivalent of this would be trying to replace the entire fuel injection system at a cost of at least a couple thousand dollars. That's not good.
Myself, my problems with K-Jetronic were either old parts like the Accumulator, damaged parts like the O-Ring inside of the Primary Pressure Regulator, cheap, crap ignition wires, and then a clogged Fuel Injector. Beyond that I can honestly say that my short list of having a well running car was simply this:
Clean ALL electrical Grounds.
Clean all electrical connections, especially those in the engine compartment.
Good working Alternator.
New MSD2 Blaster Coil with new Ballast Resistor.
800 CCA Optima Redtop Battery.
Get my CO balanced with a gas analyzer.
Did all that and I had a wonderful daily driver that never failed to start right up when I need it to.
Lou and "Boo"
10-29-2015, 06:56 PM
Wow Robert ... Wow!
How can anyone follow that.
:dunno:
mr_maxime
10-29-2015, 08:29 PM
Thanks for the write up Robert. That was a lot of what I was looking for. So assuming a working KJet system on a mostly stock Delorean is there much benefit to converting to EFI or Carb?
Bitsyncmaster
10-29-2015, 09:02 PM
Thanks for the write up Robert. That was a lot of what I was looking for. So assuming a working KJet system on a mostly stock Delorean is there much benefit to converting to EFI or Carb?
Since my KJet works so well, I find it hard to do an EFI on my car. I would enjoy doing EFI since I love playing with electronics but what would it gain? I've had my running D for 8 years now.
Nicholas R
10-29-2015, 09:42 PM
Clearly the answer is to perform an engine swap... :biggrin:
Lou and "Boo"
10-29-2015, 10:04 PM
As I enjoy the mindless operation of my carb. To each his (or her) own. Settled.
:thumbup:
Lou and "Boo"
10-29-2015, 10:06 PM
Clearly the answer is to perform an engine swap... :biggrin:
Nice !
:biggrin:
I always thought about putting a 2000 GM 3800sc in there ...
David T
10-29-2015, 11:37 PM
Nice !
:biggrin:
I always thought about putting a 2000 GM 3800sc in there ...
As far as performance is concerned there is not a lot to be gained by "just" removing the K-Jet and going to EFI or a carb. If you are doing other things too, you may get some benefit BUT be prepared to spend a LOT of money for small gains. If you want serious HP the only way you are going to get it is either putting forced aspiration on the PRV with forged pistons, different cams, and a better exhaust system. The other path is an engine swap.
DMC-81
10-29-2015, 11:45 PM
I may be wrong here but I think "Crossfire" was a GM setup for throttle body fuel injection in the 80s and 90s. I first recall seeing that term applied to the very late C3 Corvettes (circa 81-82 maybe?). I know some of the early C4 Corvettes has this setup.
Sorry not trying to digress... that was a tiny little sidebar.
Whoah, flashback!! Jeff is correct. It was the last C3 (1982) and the first C4 (1984). I had a 1984 Corvette with the Crossfire Injection. I remember it sounding cool at the time with the wording printed on the rub strip below the clamshell hood. Then I took the air cleaner off and saw how rudimentary the system was. :smile: I don't know why they called that engine a dog, it was fast enough for me! :burnout:
For 1985, the Corvette went to Tuned Port Injection, which also sounded cool!
As for carbs vs injection, I agree, to each his own. I have rebuilt Quadrajets and Holley "double pumpers" in addition to restoring my D's fuel system. Both require some reading, proper tools, and attention to detail. You can't have any leftover parts when you're done!
I think refreshing the D's CIS was simpler (mind you I didn't have any major issues to address either), but oh the memories of the sound of the secondary ports opening on the Quadrajet behind me on my V8 Fiero...... :rollin:
Lou and "Boo"
10-30-2015, 12:00 AM
Yeah, I just did a 3800sc swap on my Fiero, but I wish it had the torque of a v8. It's kinda like "sneaky"'acceleration with the 3800sc.
DMCVegas
10-30-2015, 09:33 AM
Clearly the answer is to perform an engine swap... :biggrin:
Which is exactly the route I'm planning on going.
A couple of years ago I was filling up my truck and I hear the familiar roar of a V8 echo from the freeway underpass. It was a nice GTO (the 2000's rebadged Holden version). I got to test drive one years ago at one of those GM driving events, and I really liked it. So I start thinking in my head and playing with some imaginary numbers about maybe buying one. I figure it probably might set me back between 18-23 for a decent example, especially since I prefer the first version without the grilles on the hood...
And that's when it dawned on me: Why bother dropping $20K on another car just to get a speed fix, when I could spend that same cash on the DeLorean with an engine swap to build the car I would much rather have?
It's not cheaper nor especially easier, but it gets me more power for what I want.
As far as performance is concerned there is not a lot to be gained by "just" removing the K-Jet and going to EFI or a carb. If you are doing other things too, you may get some benefit BUT be prepared to spend a LOT of money for small gains. If you want serious HP the only way you are going to get it is either putting forced aspiration on the PRV with forged pistons, different cams, and a better exhaust system. The other path is an engine swap.
Exactly! Years and years ago I asked about this in terms of switching over to the A310's carbs because they came off of the "same" engine with higher power ratings. And that's when I got schooled on the various other upgrades that must go in tandem to achieve those links.
If you have a K-Jetronic system that isn't working properly, switching over to a carburetor only suddenly *seems* like it is more powerful, but only because the carb is running better. Just like if you replace the brake pads alone with "performance" ones, you might not see much improvements on braking. But if you also replace rotors, rebuild calipers, swap flexible hoses, flush out the old hydraulic fluid at the same time... yeah, it suddenly seems like those performance pads are "performing better than stock".
Perception is a helluva thing.
But what's also interesting are the DeLorean World Tour guys. They're over in Burma still (I believe), and they're driving across the globe in 3 DMC-12's running K-Jetronic. Let that sink in a bit...
Lou and "Boo"
10-30-2015, 08:18 PM
I'm not trying to argue but I have had someone who I will keep confidential who had driven a properly tuned kjet and had driven my car in its current state and said my car have considerably more pickup than kjet. Actually said it was in his experience the fastest naturally aspirated PRV Delorean he's ever been in. Again that is just his opinion but it sure made me feel good.
And it could also be because I have the Peugot 604 manifold and exhaust headers with open thrush turbo mufflers.
Again I'm not trying to argue, just stating what I was told. Since I have only driven my own car, I have nothing to compare my car's acceleration to.
Soundkillr
10-30-2015, 09:22 PM
I'd be more willing to bet it's the combination of all the parts together.. I have driven a stock Delorean with carb alone, and it was no faster than a stock k jet car.
I'm not trying to argue but I have had someone who I will keep confidential who had driven a properly tuned kjet and had driven my car in its current state and said my car have considerably more pickup than kjet. Actually said it was in his experience the fastest naturally aspirated PRV Delorean he's ever been in. Again that is just his opinion but it sure made me feel good.
And it could also be because I have the Peugot 604 manifold and exhaust headers with open thrush turbo mufflers.
Again I'm not trying to argue, just stating what I was told. Since I have only driven my own car, I have nothing to compare my car's acceleration to.
Horsebox
10-30-2015, 09:39 PM
I guess you guys in the U.S. have stricter emissions regs to adhere to, so maybe most of you run the lambda system out of necessity in order to pass the test. In the UK, where I am, a 1981 car has a 4% CO limit so most guys here unplug the lambda sensor, remove the cat and run it rich. I played with mine for a bit at 4% CO, stock kjet components, and it was like a completely different car.
Nicholas R
10-31-2015, 09:03 AM
I guess you guys in the U.S. have stricter emissions regs to adhere to, so maybe most of you run the lambda system out of necessity in order to pass the test. In the UK, where I am, a 1981 car has a 4% CO limit so most guys here unplug the lambda sensor, remove the cat and run it rich. I played with mine for a bit at 4% CO, stock kjet components, and it was like a completely different car.
That's what I always did when I had the PRV. Unplugged the O2 sensor, ran open loop, and tuned the mixture manually. I think I adjusted it in 2008 (actually using an exhaust gas analyzer) and didn't touch it again up until the engine came out at the beginning of 2012. I know some people like the lambda system but it wasn't for me.
Bitsyncmaster
10-31-2015, 09:51 AM
Why run open loop lambda when all it takes is a wideband at the cost of less than $200 to set any closed loop AFR you want?
Andrew
10-31-2015, 06:39 PM
If you look at DPI's webpage advertising their EFI conversion package, he refers to the "failure prone" CIS system. That is a vendor description of k-Jet. Pretty telling eh?
If you look at the history of k-jet, the primary reason why it was utilized were for emission control issues, not performance. Compliance with US emissions requirements is why many US Spec Exotics such as Countachs were equipped with k-jet. The Euro spec exotics continued to use carbs for many years.
With the exception of my k-jet DeLorean, the other 4 cars in my fleet are carbureted, including my daily driver. I suppose If my "carbon footprint" mattered much to me, I might make different choices. Frankly I prefer simplicity and reliability of a carb over the complexity and questionable benefits of fuel injection, electronic or otherwise.
I've personally never used a gas analyzer to adjust a carb, I make my adjustments by sound, performance and drivability.
Dangermouse
10-31-2015, 08:08 PM
But what's also interesting are the DeLorean World Tour guys. They're over in Burma still (I believe), and they're driving across the globe in 3 DMC-12's running K-Jetronic. Let that sink in a bit...
Here's another fun fact.
All three are automatics too.
Rich_NYS
10-31-2015, 11:07 PM
I'm going to run a carbureted K-jet on my car.
Soundkillr
10-31-2015, 11:33 PM
If you look at DPI's webpage advertising their EFI conversion package, he refers to the "failure prone" CIS system. That is a vendor description of k-Jet. Pretty telling eh?
If you look at the history of k-jet, the primary reason why it was utilized were for emission control issues, not performance. Compliance with US emissions requirements is why many US Spec Exotics such as Countachs were equipped with k-jet. The Euro spec exotics continued to use carbs for many years.
With the exception of my k-jet DeLorean, the other 4 cars in my fleet are carbureted, including my daily driver. I suppose If my "carbon footprint" mattered much to me, I might make different choices. Frankly I prefer simplicity and reliability of a carb over the complexity and questionable benefits of fuel injection, electronic or otherwise.
I've personally never used a gas analyzer to adjust a carb, I make my adjustments by sound, performance and drivability.
Pretty telling? No. I think it's a vendor trying to sell a better package. If the car was factory built with a carburetor it would be the same ad.
Nicholas R
11-01-2015, 06:41 AM
Why run open loop lambda when all it takes is a wideband at the cost of less than $200 to set any closed loop AFR you want?
Are you talking about doing this with Kjet? I've never heard of this before. Is the lambda ECU adjustable to where you can set the AFR you want with a wideband O2 sensor?
I set it open loop to the AFR I wanted open loop and then didn't worry about it.
Bitsyncmaster
11-01-2015, 08:09 AM
Are you talking about doing this with Kjet? I've never heard of this before. Is the lambda ECU adjustable to where you can set the AFR you want with a wideband O2 sensor?
I set it open loop to the AFR I wanted open loop and then didn't worry about it.
You use a wideband controller with the wideband sensor (replaces the OEM narrowband).
I used this one:
http://www.innovatemotorsports.com/products/lc1.php
Then you program the wideband controller to give you the 0.5 volt output at the AFR you want and drive that output into the stock lambda input wire (blue wire). Note to also set the fastest response time on your programming.
I got fancy with my setup where I have a switch marked ECONOMY and POWER so I can select 14.7 or 13.0 AFR. I also made the wideband error code output drive the stock lambda light in the dash. So when I start my car, the lambda light is flashing for about 15 to 20 seconds as the wideband sensor is heating. Then the lambda light turns off indicating I'm running closed loop.
Nicholas R
11-02-2015, 04:36 AM
You use a wideband controller with the wideband sensor (replaces the OEM narrowband).
I used this one:
http://www.innovatemotorsports.com/products/lc1.php
Then you program the wideband controller to give you the 0.5 volt output at the AFR you want and drive that output into the stock lambda input wire (blue wire). Note to also set the fastest response time on your programming.
I got fancy with my setup where I have a switch marked ECONOMY and POWER so I can select 14.7 or 13.0 AFR. I also made the wideband error code output drive the stock lambda light in the dash. So when I start my car, the lambda light is flashing for about 15 to 20 seconds as the wideband sensor is heating. Then the lambda light turns off indicating I'm running closed loop.
This is very cool. You should do a quick write up of this (if you haven't already). I would have definitely considered this when I had the PRV. 13.0AFR was right about where I ran all the time open loop. Just a thought; I'm sure others would like to do this also.
DMCVegas
11-02-2015, 01:39 PM
I'm not trying to argue but I have had someone who I will keep confidential who had driven a properly tuned kjet and had driven my car in its current state and said my car have considerably more pickup than kjet. Actually said it was in his experience the fastest naturally aspirated PRV Delorean he's ever been in. Again that is just his opinion but it sure made me feel good.
And it could also be because I have the Peugot 604 manifold and exhaust headers with open thrush turbo mufflers.
Again I'm not trying to argue, just stating what I was told. Since I have only driven my own car, I have nothing to compare my car's acceleration to.
What's funny is when I had another owner from the UK who came over to Vegas, he commented about the pickup and go of my K-Jet compared to other cars. The "seat-of-the-pants-ometer" is always interpretive. Hell, even just washing a car makes it feel as though it drives nicer.
It's purely anecdotal because I have no specific evidence to back it up, however, I have heard in the past that the Throttle Linkage was NOT properly adjusted at the factory in Douvrin, France. And when the engines got to Belfast, they just dropped them in. Now I have not seen every DeLorean out there, let alone the massive amounts that service centers have. But of the unrestored cars that I HAVE seen, yes, the linkage is always screwed up.
Between the horizontal Throttle Spool, and the vertical Lever that controls the Butterfly Valves, there is a Rod Linkage that connects the two. If this linkage is NOT properly adjusted, there is a delay in cracking the Throttle, as well as you will NEVER EVER go full WOT. So the engine never gets to realize it's full power output. Myself, I adjusted the rods to the point of *slightly& preloading tension on the lever. Now the engine didn't suddenly become a drag racer, but once you hit the top end of second gear it really started pulling. Steep hills are where it shined, because it would just keep on pulling like the incline didn't even phase it. If you're running K-Jet, adjusting the little linkage can help a whole lot.
If you look at DPI's webpage advertising their EFI conversion package, he refers to the "failure prone" CIS system. That is a vendor description of k-Jet. Pretty telling eh?
Well if I'm selling you something, I absolutely need to have a sales pitch in order to convince you of why you should buy my product. In terms of points of failure, yes, K-Jetronic has many more, specifically relating to maintaining rest fuel pressure. It's worse susceptibility of course is in relation to decomposing rubber thanks to the introduction of Ethanol. Though that could be countered with a retrofit of the new DMCH pump/sending unit combo, as well as sourcing better rubber O-Rings.
Is EFI superior? Certainly. It has many more years of technological development behind it. Comparatively there would also be less components to fail and/or succumb to bad gas, and they have less complicated passages.
If you look at the history of k-jet, the primary reason why it was utilized were for emission control issues, not performance. Compliance with US emissions requirements is why many US Spec Exotics such as Countachs were equipped with k-jet. The Euro spec exotics continued to use carbs for many years.
That isn't necessarily true at all. Be it for K-Jetronic nor fuel injection as a whole. But we'll get to that. Let's first cover the emissions portion.
The problem with comparing to Europe is that they also continued to use leaded gasoline/petrol for MANY years after in order to get those alleged higher numbers. Our emissions control systems didn't rob us of power, Europe just tuned their engines differently and had higher compression heads because they sourced different fuels. Europe continued to use leaded fuel in order to boost octane because it was cheaper than for the oil companies to reconfigure refineries to switch away from Tetraethyllead to octane boosting alternatives such as the more expensive Methyl tert-butyl ether.
http://jalopnik.com/5849245/how-german-oil-companies-stopped-the-us-from-getting-awesome-european-cars
Likewise, carburetors were always the easy way out in terms of manufacturing costs too. It's not that they're "Better". Quite the contrary. They're just so much more cheaper to manufacture compared to Fuel Injection, as well as you avoided the costs of retooling manifolds, wiring harnesses, and potentially cylinder heads. But what we have here too is this whole entire mentality of, "Dirty tree-hugging hippies are forcing us away from carburetors because of emissions! Boooo!!!" That is just a lie. The evolution in fuel injection technologies, and especially computer controls, were able to benefit manufacturers in ways that carburetors simply cannot. Not only is fuel economy on the buying public's mind, but so is both performance and above all reliability. All of which are apart of Detroit's image problem they haven't been able to shake since the gas crisis of 1973.
I absolutely guarantee you that if you took away the Direct Injection ports on a modern engine and replaced the entire thing with a carb, you would never, ever get it to run as efficiently, nor as powerful. Plus comparatively, the reliability of carburetors isn't anything near what EFI has to offer. No choke valves, just increased duty cycles on injectors. No freezing of fuel, no fiddling with tuning or anything else.
The other thing to remember is that Fuel Injection was introduced decades prior to K-Jetronic as a way to enhance the performance of engines before emissions were even a concern. Chevrolet's Ramjet is a premier example of this. I say that both in terms of it's glaring proof that Fuel Injection wasn't just about emissions, but what even appears to be a resurging popularity with younger Shadetrees like me that are the opposite of the older guys, where we like fuel injection and really don't trust carbs. Be it the retro Mechanical Fuel Injection of Ramjet, or the growing proliferation of EFI Conversion kits for engines.
With the exception of my k-jet DeLorean, the other 4 cars in my fleet are carbureted, including my daily driver. I suppose If my "carbon footprint" mattered much to me, I might make different choices. Frankly I prefer simplicity and reliability of a carb over the complexity and questionable benefits of fuel injection, electronic or otherwise.
I've personally never used a gas analyzer to adjust a carb, I make my adjustments by sound, performance and drivability.
If you like carburetors, that's fine. I've no idea why emissions are of no concern to you though. That's like saying you don't want to deal with a complicated toilet because you don't have a problem shitting over in the corner of your living room, or into a hole in the ground next to the well that you drink out of. I personally believe along these lines, akin to "rolling coal", this seems to probably be more of a misguided political statement, but whatever.
You simply making adjustments by sound and feel though? I'm gonna tell you right now that you're totally doing it wrong. You need to use an exhaust gas analyzer. If you actually *could* tune an engine that way, then Sun, Rotunda, MoPar, Delco, and all the rest would have made Audio Spectral Analyzers instead. And truthfully, I've seen this with my own eyes. I had a friend one time with an old '73 Duster with a 318 LA engine. He bought it, it didn't run quite right, so he decided to just go out an buy a new Edlebrock carb. Supposedly pre-tuned and ready to go. So he gets the carb, bolts it up, fires it up. Car runs great! He's happy. Goes for a smog check, and FAILS. Standard 2-speed emissions test, and high CO & HCs on both speeds, but NOx OK. Goes home and tries to tune the thing buy hand, and he can't get it to run right because now it's too lean. If I remember correctly, he dropped his CO on the 2,500± RPM test (though it still failed), but then also failed the NOx on the idle speed test when that shot up. So now the whole things just screwed up. Me? I'm of no help because I don't do carbs. I grew up on Fuel Injection. Mechanical or EFI, no problem. But I don't touch carbs. So he gets another mutual friend to stop buy, and they "tune" the engine back proper again. Now it runs just like it did when it came out of the box. Guess what? It still failed emissions! Back to being way too high on the CO and HCs!
So he breaks down and drives it over to my DeLorean mechanic that I use for clutch replacements and my own emissions problems when I couldn't figure them out, and all my other cars. Tells him what's going on, and the guy tells him to come back by that afternoon. He does, and now the car passes smog! Hooray! It also drives just as well, and he then finds out that it also gets better fuel economy too later on. So what happened? Easy. The mechanic pulled the carb and put smaller jets in. Then it hooked it up to the exhaust gas analyzer to tune it for idle, 2,500 RPMs, and WOT. Even the exhaust smelled better now too!
So yes, you can tune a carburetor to simply "run" without using an exhaust gas analyzer, but you're never going to get it to run proper nor efficiently.
I'm going to run a carbureted K-jet on my car.
I've actually seen weird-ass carburetor replacement kits that do just that. Like a strange K-Jetronic/RamJet hybrid that has a single, huge injector that sprays down into the manifold. Mostly from the late 70's and into the early 1980's. There was a name for them, but I can't remember what it was... One of those off-road kits for prerunners and other desert motorsports (definetely more of a west coast thing).
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.