Copper washers

[Bitsyncmaster]

I was going to stock up on copper crush washers.

32 M8 id-8.2 od-11.9 for FD and injectors
5 M12 id-12.2 od-15.9 for FD

What other sizes and numbers does the DeLorean use?

[DMCMW Dave]

I was going to stock up on copper crush washers.

32 M8 id-8.2 od-11.9 for FD and injectors
5 M12 id-12.2 od-15.9 for FD

What other sizes and numbers does the DeLorean use?

The warmup regulator uses two 10mm washers.

There are also washers on the fuel filter and the old style pump. They are all M12 I believe.

[Bitsyncmaster]

The warmup regulator uses two 10mm washers.

There are also washers on the fuel filter and the old style pump. They are all M12 I believe.

Thanks Dave.

I bet someone could make banjo bolts that use O-rings instead. But most people don't really remove the banjos very often to justify the cost to replace them. Prices from McMaster Carr run about 25 cents each.

[mr_maxime]

Resurrecting this. I bought an assortment of metric sealing washers, but I dont think the size is same as original. I think itll work just fine, but since this is for fuel lines I want to make sure it won't be a problem. The m8s are labelled m8x13x1 and m12 are m12x16x1