Log in

View Full Version : Video walk around of VIN 16949



Chris Burns
01-31-2016, 12:26 PM
Very nice two tone interior late build Delorean:)

Very cool to see a female owned Delorean!!

https://m.youtube.com/watch?v=yhParO_kFYk

Domi
01-31-2016, 01:49 PM
Thanks for sharing ;)

16949
01-31-2016, 05:49 PM
Thanks, Chris!

Patrick C
01-31-2016, 05:59 PM
She doesn't understand the functionality of her headlight switch...I'm sure she'll discover high beams are activated by the stalk at some point.

Also, it looks like the stereo is twisting sideways, and you can see that it was likely cut for a double-din unit at one point.

16949
01-31-2016, 06:12 PM
She doesn't understand the functionality of her headlight switch...I'm sure she'll discover high beams are activated by the stalk at some point.

Also, it looks like the stereo is twisting sideways, and you can see that it was likely cut for a double-din unit at one point.

Sorry, it's not so easy to do a running commentary, there are a few screw ups in it. It wasn't made for the critics but I do welcome criticism all the same.

The stereo is twisting or not set right currently but it wasn't like that when I bought it. I think it just needs to be re-set but since I am going to work on the sound system in the future I'm not worried about it. It would surprise me immensely if either of the previous owners had ever done anything with the stereo as far as modification but then replaced the original stereo. I know the last owner didn't modify th it. If the owner before him did, it would have been in the 90s and the guy was already older at that point. So anything is possible but I doubt it. I wish they would have upgraded all the speakers and saved me the work, though.

Patrick C
01-31-2016, 06:31 PM
Sorry, it's not so easy to do a running commentary, there are a few screw ups in it. It wasn't made for the critics but I do welcome criticism all the same.

No, I know all about criticism! Take a look at the comments left on my YouTube video about my customized D...not pretty. I didn't mean for my comment to come across as an attack, just an observation.


The stereo is twisting or not set right currently but it wasn't like that when I bought it. I think it just needs to be re-set but since I am going to work on the sound system in the future I'm not worried about it. It would surprise me immensely if either of the previous owners had ever done anything with the stereo as far as modification but then replaced the original stereo. I know the last owner didn't modify th it. If the owner before him did, it would have been in the 90s and the guy was already older at that point. So anything is possible but I doubt it. I wish they would have upgraded all the speakers and saved me the work, though.

It appears there was definitely a double-DIN stereo installed once. Take a look at this photo:

http://dmctalk.org/attachment.php?attachmentid=39460&d=1454279327

On a stock bracket, that would not be cut that way.
http://store.delorean.com/images/Product/large/106639.JPG

The good news is that when you decide to upgrade your stereo, the bracket is pre-cut for you! That's usually the hardest part.

All in all it appears to be a very nice D! Congrats on ownership!

16949
01-31-2016, 06:42 PM
It appears there was definitely a double-DIN stereo installed once. Take a look at this photo:

http://dmctalk.org/attachment.php?attachmentid=39460&d=1454279327

On a stock bracket, that would not be cut that way.
http://store.delorean.com/images/Product/large/106639.JPG

The good news is that when you decide to upgrade your stereo, the bracket is pre-cut for you! That's usually the hardest part.

Hmmm, you're right. Thank you for posting the comparative pics. Is there any other reason they would do that besides for the stereo?

I will ask the PO about it. Maybe the first owner did it but then put the stock back in. I'm glad if that's the case. The stock radio is all I need, I'd rather use my phone for the audio in..

Patrick C
01-31-2016, 06:46 PM
Hmmm, you're right. Thank you for posting the comparative pics. Is there any other reason they would do that besides for the stereo?


None that I can think of. That also explains why the radio is so loose fitting in the current bracket. On the stock bracket, the radio knobs help hold the unit to the bracket, but that part of the bracket is now missing on your car hence why the radio is skewed.

16949
01-31-2016, 07:34 PM
No, I know all about criticism! Take a look at the comments left on my YouTube video about my customized D...not pretty.

Wow, you are right, some harsh shoutouts, although most were nice. Gotta love the internet. Hopefully you just laughed at the troll ones for what they were.

I really like the foot well lighting. Did the 3rd brake life get screwed into the louver? And the ipad is awesome.

Peripatetic
01-31-2016, 07:36 PM
Good walk through. It was definitely helpful to me because it confirmed to me that


Default speakers are terrible and scratchy
Theres supposed to be two nub things*
Someone elses door vents are useless
Its not just me, although I'm taller, who cant see the whole dash
"Oh, that's why theres staps"
The wood there is normal and not a last minute fix by the previous owner.


*I only have one on each side so there's the nub and a hole. Not sure on their real name, so I went with "nub".

sdg3205
01-31-2016, 07:57 PM
I've always like the carpet pile of the '83's. Not quite as fuzzy. Nice texture.

16949
01-31-2016, 08:11 PM
Good walk through. It was definitely helpful to me because it confirmed to me that


Default speakers are terrible and scratchy
Theres supposed to be two nub things*
Someone elses door vents are useless
Its not just me, although I'm taller, who cant see the whole dash
"Oh, that's why theres staps"
The wood there is normal and not a last minute fix by the previous owner.


*I only have one on each side so there's the nub and a hole. Not sure on their real name, so I went with "nub".

Are those strike pins? It makes sense from Patrick's video. I just looked on my parts catalog, the diagram I found shows 1 pin on the forward strike area, but I didn't look through the whole section. It's dark or I'd go look to see if my 2nd looks after market.

Hopefully someone will come along and know..

16949
01-31-2016, 08:57 PM
http://www.artgemsjewelers.com/
Fine Geek Jewelry.


NCR but ima order one of your lightsabre necklaces (after I see what I might owe on taxes).

They are super cute!! I need a good versus evil!

Patrick C
01-31-2016, 09:29 PM
Wow, you are right, some harsh shoutouts, although most were nice. Gotta love the internet. Hopefully you just laughed at the troll ones for what they were.

I really like the foot well lighting. Did the 3rd brake life get screwed into the louver? And the ipad is awesome.

I have thick skin, I can handle the haters. :) Yes, the 3rd brake light is actually from a junkyard Corvette! I had to drill three holes to attach it to the louvres. 2 holes for screws, 1 for wiring.

Iznodmad
01-31-2016, 10:51 PM
Just adjust the steering wheel column up so you can see the whole cluster. The adjustment knob is underneath on the right hand side of the column. It telescopes as well. You have one of the late 83s with the 81 style muffler (tips). Wonder if the engine compartment has the strap over coil cover and late style "hidden" harness? Looks to be in nice shape overall. Thanks for sharing.

16949
02-01-2016, 10:10 PM
Just adjust the steering wheel column up so you can see the whole cluster. The adjustment knob is underneath on the right hand side of the column. It telescopes as well. You have one of the late 83s with the 81 style muffler (tips). Wonder if the engine compartment has the strap over coil cover and late style "hidden" harness? Looks to be in nice shape overall. Thanks for sharing.

I've tried moving the column up and down, still no good viewing angle just increased foam noise... I didn't try telescoping, that may be the fix! Well, if, after 34 years it still telescopes :D

I do have the strap over coil cover: just replaced the ignition oil. It was missing the metal loop. I need to edit my video of that repair and upload.. I will have to check out what the non strap engines look like.

I'm not sure about a hidden harness..?

Gregadeth
02-01-2016, 10:40 PM
How did your car get titled as an 84?

16949
02-01-2016, 11:05 PM
How did your car get titled as an 84?

I have no idea but it was like that when the PO (2nd owner) purchased it from the original owner.

39480

The consolidated paperwork says 1983... I had to register it as a 1984 (I got a blank look when I asked how to change it to 1983) but it's insured as a 1983 (1984 category doesn't exist).

I think trying to change the model year on a 33 year old title, across 2 states, will be an exercise in frustration..

I'm not sure what defines a model year for title purposes...?

Nicholas R
02-02-2016, 12:46 AM
I didn't try telescoping, that may be the fix! Well, if, after 34 years it still telescopes :D

I think you'll be surprised how much of a difference the telescoping makes, both with seeing the gauges, as well as having the wheel hitting your legs. The combination of movements gives a lot of options.

Peripatetic
02-04-2016, 12:31 AM
Are those strike pins? It makes sense from Patrick's video. I just looked on my parts catalog, the diagram I found shows 1 pin on the forward strike area, but I didn't look through the whole section. It's dark or I'd go look to see if my 2nd looks after market.

Hopefully someone will come along and know..I think the strike pins are the bigger immovable bolts that the door latches onto, but I'm only 30% sure of anything I say automobile related. The previous owner had a printed parts catalog in a binder I have in the car (which is at DMCMW) that I've been meaning to have a quick study.

And the Gemsaber necklace is one of my personal favorites.