Log in

View Full Version : Team Time Car Delorean catches fire!!



Chris Burns
02-06-2016, 10:22 AM
This Delorean is owned by Paul Nigh and is used to help find missing children. Everyone is ok, but the car is yet to be determined.

Also included a before fire pic.

Not sure what caused the fire, but at least everyone is ok!!

Citizen
02-06-2016, 10:36 AM
Glad everyone is ok. Looks like the fire was at the rear of the engine compartment. Probably started by the exhaust system heating up and plastic melting. Maybe the manifold, cat or muffler got too hot.

Thomas

...

Lou and "Boo"
02-06-2016, 11:40 AM
Seeing those pics brought a tear to my eye. How sad...

DMC-81
02-06-2016, 12:05 PM
So sad. Glad everyone is OK. Looks like it's repairable.

Nicholas R
02-06-2016, 12:43 PM
He said that the car started driving very poorly and he was trying to keep going down the road, when he finally noticed the fire. Looks like it has to be a fuel leak. A fire of that magnitude has to have something causing the fire to spread so quickly. A fuel leak in the engine bay would start showing itself by a loss of fuel pressure at the injectors, meaning the car would start to run like crap. Once the engine bay is thoroughly coated with fuel, it doesn't take much before the hot exhaust ignites it. Major bummer; I know they did a lot of good work with their car. From facebook it looked like Insurance was taking care of everything, but it still totally sucks.

Domi
02-06-2016, 04:40 PM
So sorry to see the car in such a poor condition.
Everyone is safe, and that's the more important.

Chris Burns
02-06-2016, 06:04 PM
It will be fixed I'm sure!!

88KPH
02-06-2016, 08:26 PM
Son of a bi%@#!

Mark D
02-06-2016, 09:20 PM
Sad to see this happen... glad the occupants were unharmed. All things considered it could have been much worse.

skill
02-06-2016, 09:46 PM
This is heartbreaking and I'm very sorry for what happened. Such a wonderful DeLorean and a timemachine available to help bring awareness to a problem in society. Anyway we/ I can bring back your BTTF whole again quickly (and pull together as a community) as the important cause to help bring awareness to missing children there is no time to waste.

I know insurance companies can "cut a check" but time to find and replace damaged and important Delorean auto-parts, bttf is tough.

I know it's a small gesture, but I can donate the barcode license plate and as well the engine bay courtesy light and housing. Let me know where to ship it!

Brian Pereyra

vwdmc16
02-07-2016, 01:48 AM
That could have gone so much more badly, glad the damage was limited.

Ryan King
02-07-2016, 03:07 AM
I've been texting Paul off and on all day. It looks to me like it was an electrical fire. If it was fuel it would've burned up entirely and been centered around the middle of the car. This only burned on the far back end.

88KPH
02-07-2016, 05:25 AM
I've mentioned it before on other threads, but after also suffering an electrical/engine fire on an old VW which took 2 fire extinguishers and still kept re-igniting, you must fit a way of isolating the battery.

john 05141
02-07-2016, 08:13 AM
Engine fires are not uncommon for DeLoreans.The Fuellines are under a lot of pressure. Resting on those black lines are NOT A GOOD IDEA.
It will create little cracks, with a leak as a result.
That is why I made a reasonable investment in SS fuellines. Not cheap, but it makes me feel a lot more secure. Not just a possible fire but also less risk for an engine failure.
It is a small bonus, but those SS fuellines look a lot better too.


Jan

DMCVegas
02-07-2016, 06:04 PM
Engine fires are not uncommon for DeLoreans.

Ok now, lets stop right there. Because that is grossly incorrect and absolutely not true.

Engine fires are not inherent problems for the DeLorean DMC-12. Other cars may have design and engineering flaws that may make them prone to engine fires, but again, the DeLorean has no such problem.

Engine fires have a potential to occur when incompetent mechanics perform poor quality service work. Because the Crush Washers used on the Banjo Fittings are NOT reusable. Those are disposable parts. I seriously cannot stress this enough, and will say it again:

FUEL LINE CRUSH WASHERS ARE NOT REUSABLE!

They will deform to form a tight seal. But once that seal is broken, the washers must be thrown away because they can never create as good of a seal again. If it is reused there is an extremely high risk of an improper seal that can cause leaking fuel.

Stainless Steel Braided Fuel Lines are also no safer than OEM fuel lines. Both are plastic fuel lines that carry the fuel to and fro. The only difference is the covering. So instead of cushioning foam, you're just using a braided stainless webbing. Which the cracks you see in the lines are on that foam sheath, not the real lines underneath. Most importantly is the fact that no matter what type of fuel line you use, a bad seal on those crush washers is still going to cause a leak and start a fire.

High Fluid Pressures also have nothing at all to do with this. Not only has K-Jetronic alone been used in many other cars without inherent problems, but many modern motorcycles also use these same fittings with flammable hydraulic fluid in their brake lines. And they can run pressures many times higher in the 1,000 PSI range.

Gasoline is flammable no matter what pressure it is under. So it doesn't matter if you've got a leaking fuel hose, or a stuck float in a carburetor. Once gasoline escapes t's confines and hits the exhaust manifolds, or even back fires, you've got an engine fire.

If there is any common dangerous problem with DeLoreans, it would be untold numbers of unqualified mechanics that perform terrible work that risks the integrity of the car. Which in reality, isn't all that different than what any other car ever encounters.

Now I'm not trying to troll or start a fight. Hell, even I too was once under the same misgivings as to that Stainless was somehow better or safer than OEM fuel lines. But I don't want you, nor anyone else to have that false sense of security, let alone have any bad information that can seriously hurt or even kill you later on down the road. I want everyone to be educated about their cars.

88KPH
02-07-2016, 06:41 PM
it would be untold numbers of unqualified mechanics that perform terrible work that risks the integrity of the car.


Rob, I think that it's really unfair to talk about those Belfast workers like that! lol


I hear you, but I guess that the idea of switching out old fuel lines, with unknown histories, that may have sat in garages and parking bays for years/decades, for the newer stainless ones, isn't a bad idea.

Chris Burns
02-07-2016, 09:51 PM
Write up from Paul's page.

http://www.deloreantimemachine.online

SamHill
02-07-2016, 10:01 PM
Ok now, lets stop right there. Because that is grossly incorrect and absolutely not true.






http://deloreanwiki.wikidot.com/wiki:858

Chris Burns
02-07-2016, 11:54 PM
One more pic close up.

Jonathan
02-08-2016, 09:58 AM
Whether it be fuel, copper seal washers, electrical, or electrical related to time machine components, I don't think there is a lesson to learn here until we know exactly what caused the fire.

Sure, we can speculate or guess, but that doesn't help anyone at home trying to prevent a similar scene with their own car.

To me, it does look electrical and not fuel related. I have not seen pictures underneath the engine cover though. If it was electrical, then was it related to the time machine stuff added to the car?

"Go do this" or "go do that" or else because someone "confidently" guesses what might have led to this only makes for more unnecessary worry (like with replacing TABs for example, or needing car club insurance like we saw here in Ontario).

DMCVegas
02-08-2016, 11:06 AM
http://deloreanwiki.wikidot.com/wiki:858

This reply below pretty much sums up my response:


Whether it be fuel, copper seal washers, electrical, or electrical related to time machine components, I don't think there is a lesson to learn here until we know exactly what caused the fire.

Sure, we can speculate or guess, but that doesn't help anyone at home trying to prevent a similar scene with their own car.

<SNIP>

"Go do this" or "go do that" or else because someone "confidently" guesses what might have led to this only makes for more unnecessary worry (like with replacing TABs for example, or needing car club insurance like we saw here in Ontario).

Even with this old car from 35 years ago that you chose to cite, the cause of the fire was undetermined even after a professional investigation.. And with that car, it was used for emissions testing. Which most definitely would have necessitated the installation of non-standard metering equipment, which could very well have modified the car to where a problem could have been caused.

Beyond that, the big thing here is to not send people into a damn panic over nothing at all, or just as bad, to lull them into a false sense of security about anything. But what we absolutely know for certain is while there are definitely increased risks because of faulty repairs, and this is demonstrated across the board with Volvos, Mercedes, Porsches, Renaults, Lamborghinis, Ferraris, and all other cars that use this same type of fuel system, and also utilize 12V DC electrical systems. That does not mean that there is an inherit problem due to design nor engineering with the DeLorean. If there was, I feel pretty confident that we would have seen an actual widespread problem that was identified years and years ago.

88KPH
02-08-2016, 05:22 PM
Whether it be fuel, copper seal washers, electrical, or electrical related to time machine components, I don't think there is a lesson to learn here until we know exactly what caused the fire.

Sure, we can speculate or guess, but that doesn't help anyone at home trying to prevent a similar scene with their own car.

To me, it does look electrical and not fuel related. I have not seen pictures underneath the engine cover though. If it was electrical, then was it related to the time machine stuff added to the car?

"Go do this" or "go do that" or else because someone "confidently" guesses what might have led to this only makes for more unnecessary worry (like with replacing TABs for example, or needing car club insurance like we saw here in Ontario).


Sorry but have got to disagree with your logic. While none of us yet know the cause of this particular fire, it is, none the less, worth pointing out/raising/debating possible causes.
Our engines have gas, electrics, heat. Keeping these systems well maintained is kinda important.
If from this discussion makes one person think.......... "I'm not sure those CPR copper washers were replaced, perhaps I'll get a couple new ones" or another "I wonder what make of battery isolator would fit best" or someone else say "I really should fit a fire-extinguisher somewhere, but where" etc etc.
Then the discussion on possible causes is definitely worth it. I really can't see any logic in not raising awareness of the possible issues.

DMCVegas
02-08-2016, 07:54 PM
Then the discussion on possible causes is definitely worth it. I really can't see any logic in not raising awareness of the possible issues.

A discussion IS worth it, I totally agree. We should talk about what concerns we have. Then analyze them to see which are unfounded, and what we can do about the legitimate ones.

Electrical is something that is definitely on my mind. We're now entering into the phase of modern classic cars, and really the DeLorean is at the forefront of this. Because as a modern car that goes beyond a carburetor and has fuel injection, emissions controls, and other more complex electrical systems, there are new challenges not previously faced with other cars. 35 year old wiring? I have a growing concern that in another 5 years, I may have to do some serious investigating.

BUT, that is precisely that: a concern/personal opinion It is NOT a fact.

Stating something like our cars are prone to catch fire is absolutely reckless. Talking about what kinds of general problems a car may have, and how to address them thought is a good thing. Let's talk about replacing old fuel hoses, and cleaning your electrical connections. What pitfalls to avoid such as not reusing copper crush washers, or leaving the cover off of the fuse box. Talk about cleaning light bulb sockets, and replacing cracked lenses. Etc.

Those are all great ideas for ANY car. These are things we can use to instill confidence in our cars, rather than spread fear through uninformed opinions. That is what our goal should be here.

Bitsyncmaster
02-09-2016, 05:52 AM
Wires from the battery to starter and alternator are not fused and are always a concern with any car. You want to be sure those wire are routed so as not to touch any sharp metal or hot exhaust. The way our stock wiring in those areas was done really makes that routing harder to do with the many terminal on the starter and alternator.

SamHill
02-09-2016, 02:45 PM
Staring with an honest discussion, there is a "domino effect" that happens in a D engine bay that accelerates the problem once it gets started, due to the construction materials, etc.

Mark D
02-09-2016, 03:14 PM
The cause of the fire was obviously from the flame trails once the car hit 88mph. :thankyou:

louielouie2000
02-09-2016, 03:23 PM
I do a search on Instagram daily to see what DeLoreans around the world are up to. There's an almost comical amount of BTTF replicas on flatbeds posted. It sort of begs the question, is there a correlation between the BTTF conversions and breakdowns? Mostly, I wonder if people spend all their time and money affixing BTTF props, and neglect the actual mechanical updates these cars require? However, I doubt this is the case with Paul's car.

This broaches another question, though: is engine compartment heat a culprit? I tend to think engine compartment heat in stock DeLoreans is a serious issue as-is; and the BTTF conversions I've seen are totally lacking the engine cover venting stock DeLoreans have. Even on stock DeLoreans, I tend to think heat causes more issues than most owners think. I'm convinced heat from the muffler/catalytic converter shortens the lives of the cars water pumps and belt pulleys at the very least. After all, DeLoreans have exhaust manifolds, exhaust routing, a catalytic converter, and muffler ALL contained within the engine compartment within inches of the engine & it's accessories, and there is no front facing grill to bring in fresh air to dissipate heat; which was most certainly what the PRV was designed for. The BTTF conversions with their sealed engine compartments must just totally bake everything 10x worse. This could prematurely degrade all rubber and plastics (including wiring insulation), possibly warp pulley bearings, trap any moisture which may get in there (which could lead to a rabbit hole of additional issues), etc.

88KPH
02-09-2016, 03:47 PM
I think its a fair point there Louie. The amount of heat shimmer (I've a feeling there's a word for that but it escapes me) in the rear mirror can sometimes be quite amazing.
However counting pics posted on Instagram should be qualified by the likely hood of a TimeMachine being snapped and posted compared to a regular Delorean in the same situation.

Mark D
02-09-2016, 04:07 PM
The aluminum vents on a time machine conversion actually do quite a bit of venting of hot air from the engine. On the screen used cars the engine cover is cut away below the vents so there is actually more open area than on a stock engine cover. If you've ever stood behind a DeLorean time machine after it's been out driving around you can feel the heat being ejected out the back of the car.

If someone were to design their engine cover to be completely solid I can see that being an issue...

I think there is also some truth to the thought that a time machine owner may be more concerned about the props and look of the vehicle than the mechanical condition of the base car.

Chris Burns
02-09-2016, 04:13 PM
+1 for Louie's comment.

The only time machine replicas that I'm aware of where the owners actually spent the money and time upgrading their cars as well as the time machine prop add ons are Paul Nigh and The Hollers.

The time machine add ons cost 40 grand alone, then you have the car itself.

So most of the owners spend 65 to 70 grand on their time machine replicas off the bat without realizing that "oh it's a classic car that will need upkeep".

One thing that I've noticed on original Deloreans is that the engines do put out a lot of heat.

Converting to dual exhaust or using ceramic coating seems to help.

DMCVegas
02-09-2016, 04:51 PM
This broaches another question, though: is engine compartment heat a culprit? I tend to think engine compartment heat in stock DeLoreans is a serious issue as-is;

I don't believe that heat within the engine compartment is an issue at all. Traditional vehicles which have their engines mounted in the front have sealed engine compartments to prevent heat from escaping on purpose. This is of course because if you hit a puddle, you would immediately be blinded by all of the steam that would block your vision. So, it gets trapped inside. Liquid cooled Engines are cooled from the inside out, not the outside in. Many other rear and mid-engined cars exist and still do not have these concerns. That's why I'd say it's a non-issue that no one needs to worry about. Just keep your cooling system in good shape and you're fine.

I do think that it's fair to state that belt replacement is more important on a DeLorean because of the proximity of the muffler to the belts. That is an unusual circumstance. We do have an open engine bay to help, but it's still a good idea.

Now personally, my concern with a BTTF conversion isn't so much that all of the props on the back are trapping heat in. My concern rather is that we've got all of this additional flammable plastics in proximity to the exhaust system that pose more of a danger. Especially with this car where we have a those large exhaust tips. Those are closing the gap between the rear fascia and the hot exhaust pipes. Whose to say that the closer proximity might not have played a part in this if garbage flew up and got stuck between the pipe and the fascia and caught fire? Looking at this car, this doesn't look like an engine compartment fire. It looks like it started down by those tips.

Are BTTF Conversion owners more neglectful of maintenance? Boy, that is going to be a can of worms to be sure. But I do think that's a very valid concern. Over the years we've all seen where someone gets excited, buys a DeLorean, and then complains because it has problems. Not because the DeLorean is a bad car, but because they bought a decades-old used car that needs work!



The amount of heat shimmer (I've a feeling there's a word for that but it escapes me) in the rear mirror can sometimes be quite amazing.

It's a mirage. That's where the hot air starts bending the light waves and it looks like shimmering water. The heat rising is called the Stack Effect (also know as the chimney effect). That is where heat generated by a source warms the air up, and then it rises up. As it does this it creates a air pressure differential (vacuum) where cooler air down below is forced in to take it's place. As this happens and the cool air rises, it heats up to rise on it's own and repeats the cycle. But here's the thing: As the air warms up, it actually absorbs heat from the source. That means that it is facilitating it's own cooling process. Hence with the DeLorean where the radiator is mounted remotely where the displaced heat cannot come back into contact with the engine, that means our cars actually have a cooler engine compartment. It only seems hotter because it's open. But the next time you go out on a summer day with the A/C blasting, try immediately popping your hood to lean over it and feel how hot your modern car is. That should give a good reference point.

valdez
02-10-2016, 12:59 PM
The cause of the fire was obviously from the flame trails once the car hit 88mph. :thankyou:

Exactly what I was going to say. Pretty obvious what caused this.
http://www.johnlund.com/Images/10000300089.JPG
Go faster next time to keep the flames from catching up to you.

skill
02-16-2016, 12:23 AM
I'm a member on VW Air Cooled users group on Fb and I stumbled upon a post about a product... Not a bad investment for our DeLoreans. I'm planning on getting my VW ready for cruisin so for a 6 foot fire safety hose to help suppress the worst case scenario, $99 is peace of mind! Here's Blaze Cut! http://jogrusa.com/products/blazecut-fire-suppression-system

VWs are too easy targets when it comes to fuel troubles..

DMCVegas
02-16-2016, 12:56 AM
I'm a member on VW Air Cooled users group on Fb and I stumbled upon a post about a product... Not a bad investment for our DeLoreans. I'm planning on getting my VW ready for cruisin so for a 6 foot fire safety hose to help suppress the worst case scenario, $99 is peace of mind! Here's Blaze Cut! http://jogrusa.com/products/blazecut-fire-suppression-system

VWs are too easy targets when it comes to fuel troubles..

But while that is quick to extinguish a small fire, what about when fuel lines continue to spray gasoline and eventually hit the manifolds that are still hot...and thus create a second fire?

Tillsy
02-16-2016, 05:52 PM
But while that is quick to extinguish a small fire, what about when fuel lines continue to spray gasoline and eventually hit the manifolds that are still hot...and thus create a second fire?

There is always a "what if". What if I wait for the next model, the model after that, etc. what if it could automatically dial emergency services. What if it could extinguish the heat from an alien's laser beam igniting the engine bay.

Ultimately doing something is still better than nothing. Although conceivably if you have a system that can kick in and react, then it could also cut power to the fuel pump and isolate any further fuel like the inertia switch does in a crash...

Bitsyncmaster
02-16-2016, 05:56 PM
There is always a "what if". What if I wait for the next model, the model after that, etc. what if it could automatically dial emergency services. What if it could extinguish the heat from an alien's laser beam igniting the engine bay.

Ultimately doing something is still better than nothing. Although conceivably if you have a system that can kick in and react, then it could also cut power to the fuel pump and isolate any further fuel like the inertia switch does in a crash...

I would assume the engine was turned off or shut off itself. That would turn off the fuel pump via the RPM relay and you should only have a few ounces of fuel under pressure by the accumulator.

Timebender
02-16-2016, 06:13 PM
But while that is quick to extinguish a small fire, what about when fuel lines continue to spray gasoline and eventually hit the manifolds that are still hot...and thus create a second fire?
I actually had it happen on my 63 Deluxe, where the fan belt broke loose, and thus knocked the fuel line loose, and that caused tons of gas to pour out, OVER the manifold and out the back as I was driving, lost acceleration and could smell fuel. As soon as I pulled off the freeway I shut off the power, got out, saw gas pouring out the back, and there was no fire at all.

Gas isn't flammable per se, but since it kept pouring out, it kept it from turning into a BBQ.

Or I'm just super lucky.

A lot.

Dangermouse
02-16-2016, 06:26 PM
I'm a member on VW Air Cooled users group on Fb and I stumbled upon a post about a product... Not a bad investment for our DeLoreans. I'm planning on getting my VW ready for cruisin so for a 6 foot fire safety hose to help suppress the worst case scenario, $99 is peace of mind! Here's Blaze Cut! http://jogrusa.com/products/blazecut-fire-suppression-system

VWs are too easy targets when it comes to fuel troubles..

I have used a variation of that in industrial electrical equipment and it works best in an enclosure. It is effective because when the heat has gotten high enough to melt the tubing, it has also caused an electrical short which trips the circuit. The pressurized inert gas extinguished the flame and there is no new energy source to start it again.

The engine bay of D is just too open for it to work effectively, IMHO

DMCVegas
02-16-2016, 06:52 PM
There is always a "what if". What if I wait for the next model, the model after that, etc. what if it could automatically dial emergency services. What if it could extinguish the heat from an alien's laser beam igniting the engine bay.

Ultimately doing something is still better than nothing. Although conceivably if you have a system that can kick in and react, then it could also cut power to the fuel pump and isolate any further fuel like the inertia switch does in a crash...

I'm not going to say that being apathetic is the solution at all. What I am saying however is merely to have the right tool for the job. Which in all fairness, this may not be. Even killing the fuel is a terrible idea. I've had a blowout in my F150 where the tread slammed into the wheel well and triggered the inertia switch. Suddenly being without power in the middle of the Interstate is pretty damn terrifying in itself. I love my cars and trucks, but I can buy another. I'd rather coast safely to the side of the road and let the car burn, than get stranded in the center and get into a collision...where I am now crippled...and possibly burning to death.

There are thousands of DeLoreans left in the world, and millions of other cars. But there is only one me. I can get another car, but not a second chance at life. And that is something that applies to all of us.



I would assume the engine was turned off or shut off itself. That would turn off the fuel pump via the RPM relay and you should only have a few ounces of fuel under pressure by the accumulator.

I would refer back to my previous comment about the inertia switch. But look at the vehicle we're testing this in. It's rear-engined, and in this case is also hidden well below the floor of the van. There is absolutely no way in the world that you're going to know that there was a fire that got put out, let alone if it starts up again. How many DeLorean owners who have gone through fires actually noticed smoke before odors or flames? It's a whole lot different when you've got a front-engined car where you see and smell smoke immediately.

Again, I would refer back to having the correct tool for the job. Everyone should be driving around with an easily accessible fire extinguisher in their car. That doesn't mean the trunk, that doesn't mean the rear cubby. That means mounted on the parcel shelf, or in between your seats and the door sills. Like the time machine car we saw here, I'd be willing to bet dollars to donuts that a fire extinguisher is precisely what saved this car. Chances are that with a properly maintained vehicle, YOU might not ever need the fire extinguisher. But others may, and you can help them. Especially in a parking lot where your own car might be at risk, or someone might be trapped inside.

I'm not going to say that this product doesn't work as advertised, but I absolutely would say that until there is testing to prove otherwise, I wouldn't trust it to be the end-all, be-all, last line of defense that is going to save your car. Because while it is helpful, I don't believe that it's going to be 100% effective. Simply put, it doesn't appear to work in the way that everyone really wants it to.




I actually had it happen on my 63 Deluxe, where the fan belt broke loose, and thus knocked the fuel line loose, and that caused tons of gas to pour out, OVER the manifold and out the back as I was driving, lost acceleration and could smell fuel. As soon as I pulled off the freeway I shut off the power, got out, saw gas pouring out the back, and there was no fire at all.

Gas isn't flammable per se, but since it kept pouring out, it kept it from turning into a BBQ.

Or I'm just super lucky.

A lot.

No, you got lucky. Gasoline is actually hellaciously flammable. It has an autoignition temperature of 530°F, whereas your manifolds right below your fuel source (injector or carb) are running at a minimum of 900°F

https://www.conncoll.edu/media/website-media/offices/ehs/envhealthdocs/Gasoline_All_Types.pdf

There tends to be confusion about this because of the old match test in a can of gasoline that science teachers use. But that is just in terms of proving variable levels of flammability (ie a 4" cube of coal has 96in² of surface area that can catch fire. Split the cube in half parallel to an edge and you have the exact same volume of coal, but now you have an additional 28in² of exposed surface area to catch fire. Thus why coal dust is more dangerous than a nugget) in order to prove an increase danger of vapor to condensed liquid gasoline. But both are highly flammable. I don't know what happened in your case because I don't know the factors involved. But gasoline is NOT something you want to mess around with, and you were very lucky indeed.

skill
02-16-2016, 07:51 PM
I'm not going to say that being apathetic is the solution at all. What I am saying however is merely to have the right tool for the job. Which in all fairness, this may not be. Even killing the fuel is a terrible idea. I've had a blowout in my F150 where the tread slammed into the wheel well and triggered the inertia switch. Suddenly being without power in the middle of the Interstate is pretty damn terrifying in itself. I love my cars and trucks, but I can buy another. I'd rather coast safely to the side of the road and let the car burn, than get stranded in the center and get into a collision...where I am now crippled...and possibly burning to death.

There are thousands of DeLoreans left in the world, and millions of other cars. But there is only one me. I can get another car, but not a second chance at life. And that is something that applies to all of us.




I would refer back to my previous comment about the inertia switch. But look at the vehicle we're testing this in. It's rear-engined, and in this case is also hidden well below the floor of the van. There is absolutely no way in the world that you're going to know that there was a fire that got put out, let alone if it starts up again. How many DeLorean owners who have gone through fires actually noticed smoke before odors or flames? It's a whole lot different when you've got a front-engined car where you see and smell smoke immediately.

Again, I would refer back to having the correct tool for the job. Everyone should be driving around with an easily accessible fire extinguisher in their car. That doesn't mean the trunk, that doesn't mean the rear cubby. That means mounted on the parcel shelf, or in between your seats and the door sills. Like the time machine car we saw here, I'd be willing to bet dollars to donuts that a fire extinguisher is precisely what saved this car. Chances are that with a properly maintained vehicle, YOU might not ever need the fire extinguisher. But others may, and you can help them. Especially in a parking lot where your own car might be at risk, or someone might be trapped inside.

I'm not going to say that this product doesn't work as advertised, but I absolutely would say that until there is testing to prove otherwise, I wouldn't trust it to be the end-all, be-all, last line of defense that is going to save your car. Because while it is helpful, I don't believe that it's going to be 100% effective. Simply put, it doesn't appear to work in the way that everyone really wants it to.





No, you got lucky. Gasoline is actually hellaciously flammable. It has an autoignition temperature of 530°F, whereas your manifolds right below your fuel source (injector or carb) are running at a minimum of 900°F

https://www.conncoll.edu/media/website-media/offices/ehs/envhealthdocs/Gasoline_All_Types.pdf

There tends to be confusion about this because of the old match test in a can of gasoline that science teachers use. But that is just in terms of proving variable levels of flammability (ie a 4" cube of coal has 96in² of surface area that can catch fire. Split the cube in half parallel to an edge and you have the exact same volume of coal, but now you have an additional 28in² of exposed surface area to catch fire. Thus why coal dust is more dangerous than a nugget) in order to prove an increase danger of vapor to condensed liquid gasoline. But both are highly flammable. I don't know what happened in your case because I don't know the factors involved. But gasoline is NOT something you want to mess around with, and you were very lucky indeed.

I agree with you Robert on many of the points you've made. Absolutely, the right tool for the job always because bottom line it's what gets the job done right. In this case put out a fire! Owner's, I do think a 35 year old car comes with a liability. Some sooner than most. I know this might sound way out and far fetched... yet, redundant in many ways. I'm really happy with with the DeLorean and are humble about having one. When I open my garage it's a slap in the face reminder damn, I own a dream. Simply said, as a former IT guy, redundancy is good. Backing up files on multiple drives is right (i.e., RAID array). In this case, ways to avoid a catastrophic event occur to your Dream, redundancy is okay to save it before you wake up.

Here's my 2 cents.

An extinguisher on the shelf that is accessible as mentioned by Robert.
A fuel shut off valve somewhere before the pump and fuel sent to the injectors. Kill the fuel feed line!
A kill switch at battery (of course shut off your car).
and as back up BlazeCut or whatever similar product both over the engine bay and over the battery.
A live feed camera over your engine bay (a screen on your dash baby!) - real-time video! You can have this installed in your pride of joy for peanut$! How could you not now?

:)

P.S. Don't call your insurance guy, for what? We don't need any more salvaged titles. Value is in clear titled DeLoreans. Save the Dream.

Andy
10-06-2016, 05:10 AM
Since Paul is attending the Fireball Run at the moment, I assume it has been fixed completely?

By the way, does anybody know the VIN on Paul's car? I've just noticed I've never found out to this day ...

Rich W
10-07-2016, 06:45 PM
I do a search on Instagram daily to see what DeLoreans around the world are up to. There's an almost comical amount of BTTF replicas on flatbeds posted. It sort of begs the question, is there a correlation between the BTTF conversions and breakdowns? Mostly, I wonder if people spend all their time and money affixing BTTF props, and neglect the actual mechanical updates these cars require? <snip>

That reminds me ...

I know my BTTF Prop Car has only been on a flatbed truck once, but that's because my hover conversion was not operational
and I had to get the vehicle up to "dock height" to get the vehicle back-stage at the Harris Theatre in downtown Chicago.

46528

Technically, it was on the truck twice ... once to get it on the dock and once to get if off the dock.

bytes311
12-13-2016, 03:41 PM
Since Paul is attending the Fireball Run at the moment, I assume it has been fixed completely?

By the way, does anybody know the VIN on Paul's car? I've just noticed I've never found out to this day ...

I saw Paul's car parked at DMC CA last month, and didn't notice anything unusual about it. 47843

Rich W
09-29-2017, 01:11 PM
Since Paul is attending the Fireball Run at the moment, I assume it has been fixed completely?

By the way, does anybody know the VIN on Paul's car? I've just noticed I've never found out to this day ...

Paul is back on the road again, in this year's Fireball Run event. A few "legs" into the run, as of today.

At least there is a "new" and "creative" ticket to talk about ... a future parking ticket to be paid in 2050.

53700

http://www.messengernews.net/news/local-news/2017/09/off-with-a-bang/

http://www.messengernews.net/news/local-news/2017/09/fireball-teams-roar-into-fd/

http://www.yankton.net/community/image_b52ac17e-a4c0-11e7-80cd-8fd6508dbbc2.html