Need pic of where these clips go exactly for clutch line

[1batt4u]

Hi all,

Can someone post a quick picture of where exactly these 2 clips go? I took these off few years ago when I began the project, forgot where exactly they go. They are for the clutch line, but not sure where they go, so many holes around there.

http://store.delorean.com/p-8690-single-pipe-clip.aspx

http://store.delorean.com/p-6551-double-pipe-clip.aspx

Thank you!!!

[David T]

Hi all,

Can someone post a quick picture of where exactly these 2 clips go? I took these off few years ago when I began the project, forgot where exactly they go. They are for the clutch line, but not sure where they go, so many holes around there.

http://store.delorean.com/p-8690-single-pipe-clip.aspx

http://store.delorean.com/p-6551-double-pipe-clip.aspx

Thank you!!!

If you are using the stainless steel braided line they won't work. Just use zip-ties.

[DMC-81]

If you are using the stainless steel braided line they won't work. Just use zip-ties.

+1 I have the rear end of my car elevated right now, and I checked that area. No clips like that are holding the clutch line on my car. However, there are a few holding the hard lines of the brakes throughout the frame. Those look too small for the clutch lines anyway.

I replaced the nylon clutch line with SS and there were zip ties holding the line to the frame along the mid section. I also replace the hard line ( 106773 ) and there was no plastic clip.

Cheers,

[1batt4u]

Yes, using the SS line. Ok, cool, so I will zip tie it down. I replaced all the clips anyway, as well as SS brake lines form DPI Josh. I have the body raised off the frame.

Question, why the white clip has a double clip on it. Looks like its supposed to hold 2 lines? Something else goes on it?

[Rich_NYS]

Yes, using the SS line. Ok, cool, so I will zip tie it down. I replaced all the clips anyway, as well as SS brake lines form DPI Josh. I have the body raised off the frame.

Question, why the white clip has a double clip on it. Looks like its supposed to hold 2 lines? Something else goes on it?

I recall seeing that one recently, don't remember exactly where but I think it would have to be on the passenger side along the center frame rail.

[Rich_NYS]

I recall seeing that one recently, don't remember exactly where but I think it would have to be on the passenger side along the center frame rail.

Now that I've thought more about it, I think I saw two different size double clips...not sure which this is (would depend on the size.)