Relay upgrade kit and new actuators question

[smcguiga]

I installed the relay upgrade kit a while back and everything has been working fine. I just now received new actuators for the door locks and was going through the installation instructions and was remembering how hard of a time I had installing the new breakers because the old ones didn't have BAT or AUX on them like the new ones. I believe I installed them correctly but wanted to confirm that they are correct before continuing with the actuator installation. The red wire coming from the door lock module is connected to the BAT terminal (copper colored postt) and the brown wire coming from the harness is on the AUX terminal. Is that correct, or should they be reversed? I'm thinking now that I have them backwards. The actuator install says to connect the yellow wire on the free AUX terminal.
41824

[DMC-81]

Hi there,

I recently refurbed that same area by installing the relay update kit and rebuilding my door lock module (DLM), and I have the brown wire on the BATT terminal, and the red DLM wire on the AUX terminal.

Cheers,

[Chris 16409]

Yes, the brown wire should go to the "BAT" side of the breaker.

[smcguiga]

Awesome thanks for the assistance! I was able to get my new actuators installed and they are working great.

https://www.youtube.com/watch?v=a618riyllbM

Next is the Wings-A-Loft install. :)