Help with idler pulley spacer sizes

[m_w]

About 6 years ago I disassembled the idler pulleys. I removed them and the a/c compressor from the car. Now the time has come to put this stuff back on and get the a/c working again. I took a few pictures of the assemblies, but apparently didn't take enough. I need some help identifying which spacers go where on the idler pulley brackets.

Can anyone provide sizes for the spacers in the pulley diagram? http://store.delorean.com/c-364-7-2-1-pulleysdrive-belts.aspx

#5
#6
#10
#14

I also have a picture of one spacer that i don't see listed in the parts diagram. It is on the smaller of the two pulley brackets on the right most M7 bolt. See my attached picture.
41878

help?

[PJ Grady Inc.]

About 6 years ago I disassembled the idler pulleys. I removed them and the a/c compressor from the car. Now the time has come to put this stuff back on and get the a/c working again. I took a few pictures of the assemblies, but apparently didn't take enough. I need some help identifying which spacers go where on the idler pulley brackets.

Can anyone provide sizes for the spacers in the pulley diagram? http://store.delorean.com/c-364-7-2-1-pulleysdrive-belts.aspx

#5
#6
#10
#14

I also have a picture of one spacer that i don't see listed in the parts diagram. It is on the smaller of the two pulley brackets on the right most M7 bolt. See my attached picture.
41878

help?
#5 & 6 are M7 washers. #10 is the "short idler spacer" (M7 ID x M15 OD x M7 Wide). #14 is the "long spacer" at M12 width. Does that work for you?
Rob

[DMC-81]

To add to what info Rob provided, I think that extra spacer/washer looks normal. Here's two pics that may help..
41917

41918

Good luck.