Scheme for injector lines

[Delta DeLorean]

I want to install my new injector lines that I have bought from DMC.
Only 2 have the same lenghts. They are all labeled with there lenght.
Is there a scheme to see where the different lenghts go?
I also have new lines for the wur and cold start valve.
After 35 years on the car it is hard to straighten the old ones to measure them.

[DMC-81]

Hi there,

Are they individually labeled with part numbers or cylinder numbers? That's what I recall when I installed my set. I used the diagram on the DMC website as a guide:

http://store.delorean.com/c-335-2-2-0-fuel-injection-system.aspx

This page lists the part numbers and what cylinder they go on.

Good luck with the install.

Cheers,

[Delta DeLorean]

Thanks for the reply.
The set is labeled in centimeters. It came from europe. No part numbers on there.

[SS Spoiler]

Doesn't matter which hose goes to which injector. They all
Receive fuel at the same time. Just start with the longest ones
to the furtherst injectors and work back.

[Delta DeLorean]

The lines are in place and I am happy with how it turned out.
Only thing left to do is replace the return line from the fuel head to the return pipe.
Next weekends job that is.
Who sells the best stainless braided hoses for the frequenty valve? Need to buy them.43169