content22207_2
07-02-2016, 01:46 PM
Received an eMail inquiry about the ring terminal ground wire attached to the ECU tray. This is the second time that wire has come up in a week, so I've revised my ground schematic to show the wire and where it goes.
If you pull back the rubber boot on the ignition ECU harness connector you will see the ECU tray wire ganged onto the ECU's ground:
44162
Revised schematic:
44163
44164
Bill Robertson
#5939
If you pull back the rubber boot on the ignition ECU harness connector you will see the ECU tray wire ganged onto the ECU's ground:
44162
Revised schematic:
44163
44164
Bill Robertson
#5939