PDA

View Full Version : Electrical Show me your Jumper!!


Ras12
07-13-2016, 09:51 PM
My fan jumper wire melted and fused together so I have been searching for my factory relay to send out to Dave as a core replacement for his solid state fused relay. In the meantime, my car sat idle so my electrician friend created this jumper using 10 gauge wire and individual 20 amp fuses. I replaced the melted relay socket too.

What do you think of the before and after pics below. Any comments (positive or negative) are welcome. I take constructive criticism well.

And while you are at it, show us your too!
iflights
07-14-2016, 08:02 AM
My fan jumper wire melted and fused together so I have been searching for my factory relay to send out to Dave as a core replacement for his solid state fused relay. In the meantime, my car sat idle so my electrician friend created this jumper using 10 gauge wire and individual 20 amp fuses. I replaced the melted relay socket too.

What do you think of the before and after pics below. Any comments (positive or negative) are welcome. I take constructive criticism well.

And while you are at it, show us your too!

The only core I thought Dave required was for the RPM relay? I've never sent him a core on the others.
Ras12
07-14-2016, 08:04 AM
Wow, You are right. I just checked my email. Well, I guess I have a spare jumper now.
content22207_2
07-14-2016, 09:02 AM
show us your too!

44526

Bill Robertson
#5939
Bitsyncmaster
07-14-2016, 08:53 PM
Correct. No core needed for the fan fail. Only two units, RPM relay and idle ECU require a core.
DMC-81
07-14-2016, 10:08 PM
My fan jumper wire melted and fused together so I have been searching for my factory relay to send out to Dave as a core replacement for his solid state fused relay. In the meantime, my car sat idle so my electrician friend created this jumper using 10 gauge wire and individual 20 amp fuses. I replaced the melted relay socket too.

What do you think of the before and after pics below. Any comments (positive or negative) are welcome. I take constructive criticism well.

And while you are at it, show us your too!

Hi there,

Here's the one that was in the car when I got it:

44536

It looked brand new and very close to the jumper that I got in the relay kit from DMC, so I kept the DMC one as a spare:
44537