Where do these parts go?

[BigBenb84]

When I was removing my front fascia these came falling out at some point. A few weeks later and now I'm putting it back on. I didn't see where they came from exactly and I can't find them on the parts diagram for the front fascia area.

44588

[DMC-81]

When I was removing my front fascia these came falling out at some point. A few weeks later and now I'm putting it back on. I didn't see where they came from exactly and I can't find them on the parts diagram for the front fascia area.

44588

Hi Ben,

Thise are part 105453 (http://store.delorean.com/p-9468-shimplate-dr-hinge.aspx) shim plate for the door hinges. When I took my fascia off, they were used as a shim between the fascia reinforcement panel 105678 and the top of the front end support panel 108098.

When I put my front end back on, I found that I didn't need them to get things aligned properly. Of course, YMMV.

[hmcelraft]

I've also found these things used as extension braces to hold the air cowl in place. They had been slipped over the bolt designed to hold it in place originally but, for what ever reason, was spaced too far away to effectively hold the cowl. This works great and is easy to slip over the bolt and stay in place and not too ridged to form to the contour.

[DMC-81]

I've also found these things used as extension braces to hold the air cowl in place. They had been slipped over the bolt designed to hold it in place originally but, for what ever reason, was spaced too far away to effectively hold the cowl. This works great and is easy to slip over the bolt and stay in place and not too ridged to form to the contour.

Definitely! Thanks for outlining that. My car was one of the early ones that had the rivnuts in the wrong place to hold the radiator cowl. Here's a pic of the shim..

44590

[DMCMW Dave]

Definitely! Thanks for outlining that. My car was one of the early ones that had the rivnuts in the wrong place to hold the radiator cowl. Here's a pic of the shim..

44590

I'm not sure they ever fixed that! At any rate it's on more than just the very early cars. But completely unnecessary. Once that fan duct is in place, it's not going anywhere.

[DMC-81]

I'm not sure they ever fixed that! At any rate it's on more than just the very early cars. But completely unnecessary. Once that fan duct is in place, it's not going anywhere.

Thanks Dave. I understood that it was just the early ones had this error. It's an interesting quirk.

[BigBenb84]

Oooooh yea, Now that I saw your pic I do remember seeing those there. I also have rivnuts in out of place areas that I figured was due to it being...well..a DeLorean.

[Mark D]

Thanks Dave. I understood that it was just the early ones had this error. It's an interesting quirk.

My car had the same band-aid fix with the shim brackets. I think I left them off when reassembling everything after swapping radiators. As Dave said, they really aren't necessary.