PDA

View Full Version : DMC Houston Pump Sender Unit



steve
07-22-2016, 04:32 PM
Dmc Houston Combo Fuel Pump Sender. On the road today strong smell of gas car shut off. Gas puddle under car at passenger feet. Pulled cover plate off in 95 Deg. heat
to find supply line melted???????? Dmc hose supplied with unit smeared in my fingers turning them black. Could smear the covering off to expose the braided parts. Internally
the hose had deteriorated where the barbs had held it.

I cut off 2" of line and proceeded to reinstall using the old clamp that I will replace tomorrow.

The DMC line is marked Fuel in green and says BioFuel. The barbed fitting is either steel or brass that feeds into the steel line.

Any thoughts as this scared the S****T out of me smelling the gas at 65 MPH.
Steve

DMC-81
07-22-2016, 05:58 PM
Sorry to hear that!

When was the fuel pump combo installed? I recall reading that they had some problems with the rubber hoses early on when it was first introduced.

steve
07-22-2016, 06:51 PM
The unit is 2 years old. Did not know their was a hose problem. Worried about the return side as it is the same material.

Steve

DMC-81
07-22-2016, 07:11 PM
I would contact them. They have always made it right for me. You should ensure the hoses are rated for fuel injection. Gates Barricade I believe.