PDA

View Full Version : General Need advice. I just inherited a 1981 Delorean with 1,248 miles. Been in dry storage



hillbillysims
08-17-2016, 11:02 AM
I have inherited a basically brand new Delorean from my grandfather & need advice on what steps need to happen to make it totally roadworthy/dependable because I plan to drive it regularly. I just want to do it right.

My grandfather bought 2 deloreans new in 1981. One he drove for about 25,000mi before parking... the other (a 5-speed) he drove for a couple weeks & parked it in dry storage & it hasn't moved since about 1983. Not cranked or anything.

The one I'm getting has 1,248 miles on it.. looks absolutely brand new inside, outside and underneath.

I hear that it will need a lot of electrical upgrades, fuel system completely cleaned (or replaced?), possibly all new brakes... Anything else?

I'd love to find a real expert in Tennessee or George to perform the 1st pass of work for me rather than having to haul it to DMC-FL (<< Unless DMC-FL is really the highly recommended path to go).

Once it has all been upgraded & made totally roadworthy I feel confident that I will be able to maintain it myself & fix small things that come up here and there.

Let me know your thoughts!

dodint
08-17-2016, 11:17 AM
What an exciting opportunity.

I don't have anything of value to add, so I'll be first to ask what the VIN is since it's inevitable. ;)

hillbillysims
08-17-2016, 11:21 AM
I should have written down the VIN# on it when I went to see it last weekend. It will be several months before the estate is settled & the car is physically released to me. So I have a little time to prepare & get my plans together for repairs / etc.


What an exciting opportunity.

I don't have anything of value to add, so I'll be first to ask what the VIN is since it's inevitable. ;)

Andrew
08-17-2016, 11:44 AM
Welcome to the DeLorean community! You may want to contact Lawrence in Kentucky, he is probably the closest Delorean tech to your area.

Andrew
4194
5052

bfloyd
08-17-2016, 01:02 PM
What part of Tennessee are you in? I'm in Lebanon (30 minutes east of Nashville).

While I'm no EXPERT, I am a fellow owner who has rebuilt my own car after it had sat untouched for 20 years. As a "newby", I can tell you the information shared on these forums are absolutely invaluable.

DavidProehl
08-17-2016, 01:15 PM
Sounds like you are approaching it the right way. Shipping the car to DMC-FL would be the best option, they will appreciate the pristine condition and understand the necessary upgrades required more so than any local shop, even if that local shop has worked on DeLoreans.

I would recommend biting the bullet and shipping it. You got a perfect car for free, so spending the money up front to keep it perfect would be the right thing to do. A flawless, low mileage running car like you are intending to have could be worth $40k on the private market. While admittedly unlikely, I'd hate to see a local shop screw that up and leave you with a $30k car.

mluder
08-17-2016, 02:15 PM
Alternatively you can send it to DeLorean Performance Industries in Akron, Ohio. While I've never had him work on my car, Josh at DPI seems very thorough and thoughtful.

Cheers
Steven

Rich W
08-17-2016, 03:00 PM
Keep your options open. Since you mentioned it may take a few months before you take possession of the car, you have time to check several options.

The DeLorean Convention and Show has had DMC Midwest help restore two DeLoreans (for the DCS Raffle Cars) within the last 18 months.
The 2015 Raffle Car has put on over 5,000 miles since October 2015 and the 2016 Raffle Car put on over 1,000 "test miles" by July 22, 2016.

The 2016 Raffle Car was "revived" after being stored for the last 12 - 15 years (half of your storage) and the car needed plenty of attention.

DMC Midwest uses an enclosed trailer (via Gullwing Transport) for transporting, which I highly recommend for DeLoreans, whenever possible.

I know Mike schedules transports a few times a month and you can schedule your pick-up on a weekend, which can make things even easier.

DavidProehl
08-17-2016, 03:08 PM
DMC Midwest uses an enclosed trailer (via Gullwing Transport) for transporting, which I highly recommend for DeLoreans, whenever possible.

Completely agree with this. DMC-MW has done great work on my car. I recommended DMC-FL since the OP listed them, and I'm assuming he is substantially closer to them.

Enclosed trailers are the way to go. It doesn't take much searching on this site to find threads of people that regret going with a basic trailer (rock damage, broken louvers, etc).

Dangermouse
08-17-2016, 03:30 PM
Where are you and where is the car?

You mentioned TN and GA.

Michael
08-17-2016, 04:05 PM
Are you by any chance in Elizabethton? A friend was telling me about someone who recently inherited a DeLorean. If that's you I will be in Elizabethton tomorrow working (I gp there once a week) and would be happy to give it a once over for you. Just PM me.
Michael

PS: Do not let ANYONE try to start it.

Jonathan
08-17-2016, 04:42 PM
Congrats on inheriting this car. That is great that you plan to keep it and drive it.

One thing that came to mind was about how much money one could spend on a restoration like this. DMCFL, or DMCMW for that matter, will do great work to get it back to driving condition. It will not be cheap though. As mentioned, the guys in Florida are no strangers to pristine cars and very low mileage ones like you've described. What your personal finances look like are none of my business, but consider that an inherited car like this you got "for free" so to speak, can turn into a considerably expensive hobby.

I'll echo the suggestion of getting someone local to look it over for you and was going to mention Michael, so good to see he also just commented. Barry or Dermot or another local owner might not give you the full blown mechanic's assessment, but it will certainly give you a realistic one.

I don't mention having others help you look at it to steer you away from sending the whole car to a vendor shop for the restoration, only to give you a chance to evaluate how much money you're prepared to put into it. They will do a great job, as I said, but when you consider you came into a car for $0.00, it can skyrocket that amount in a hurry. I'd love to inherit something awesome like that too. Or win one of those dream home lotteries you see. With that example though, it might be painful keeping up with the costs of owning such a home, if you don't have things sorted out and planned for prior to day one.

Just trying to mention what direction this car could go for you and for you to plan accordingly with what is right for you. Having some extra time between now and when you get it will be good to speak with other owners and hopefully have one or more of them see the car with you and give you their opinions on what's going to be needed. Then decide what fits your lifestyle.

Dangermouse
08-17-2016, 04:47 PM
Where are you and where is the car?

You mentioned TN and GA.

I say this not to be nosy, rather to see who is closest to where the car is ;)

hillbillysims
08-17-2016, 05:19 PM
Near Chattanooga


What part of Tennessee are you in? I'm in Lebanon (30 minutes east of Nashville).

While I'm no EXPERT, I am a fellow owner who has rebuilt my own car after it had sat untouched for 20 years. As a "newby", I can tell you the information shared on these forums are absolutely invaluable.

hillbillysims
08-17-2016, 05:22 PM
Car is at my grandpa's house in VA. I will be bringing it back to the Chattanooga area once the estate is all settled


Are you by any chance in Elizabethton? A friend was telling me about someone who recently inherited a DeLorean. If that's you I will be in Elizabethton tomorrow working (I gp there once a week) and would be happy to give it a once over for you. Just PM me.
Michael

PS: Do not let ANYONE try to start it.

hillbillysims
08-17-2016, 05:27 PM
Even though it's essentially a brand new car in pristine condition... I understand it has been sitting since about 1983. I would want the electrical updates completed, typical engine/transmission stuff sorted out, brakes etc etc.

I guess I was expecting in my head that I might have to spend about $10,000 to bring this thing up to road worthiness (If I sent it to DMC Florida). Do you all think that is far SHORT of what I'm gonna have to spend?

The only "restoration" this car will require is going to be directly attributed to the length of time it has been sitting & any electrical upgrades that may make sense. Visually... it's MINT, outside, inside, and underneath. No leaks of any kind either.


Congrats on inheriting this car. That is great that you plan to keep it and drive it.

One thing that came to mind was about how much money one could spend on a restoration like this. DMCFL, or DMCMW for that matter, will do great work to get it back to driving condition. It will not be cheap though. As mentioned, the guys in Florida are no strangers to pristine cars and very low mileage ones like you've described. What your personal finances look like are none of my business, but consider that an inherited car like this you got "for free" so to speak, can turn into a considerably expensive hobby.

I'll echo the suggestion of getting someone local to look it over for you and was going to mention Michael, so good to see he also just commented. Barry or Dermot or another local owner might not give you the full blown mechanic's assessment, but it will certainly give you a realistic one.

I don't mention having others help you look at it to steer you away from sending the whole car to a vendor shop for the restoration, only to give you a chance to evaluate how much money you're prepared to put into it. They will do a great job, as I said, but when you consider you came into a car for $0.00, it can skyrocket that amount in a hurry. I'd love to inherit something awesome like that too. Or win one of those dream home lotteries you see. With that example though, it might be painful keeping up with the costs of owning such a home, if you don't have things sorted out and planned for prior to day one.

Just trying to mention what direction this car could go for you and for you to plan accordingly with what is right for you. Having some extra time between now and when you get it will be good to speak with other owners and hopefully have one or more of them see the car with you and give you their opinions on what's going to be needed. Then decide what fits your lifestyle.

Jonathan
08-17-2016, 05:49 PM
Even though it's essentially a brand new car in pristine condition... I understand it has been sitting since about 1983. I would want the electrical updates completed, typical engine/transmission stuff sorted out, brakes etc etc.

I guess I was expecting in my head that I might have to spend about $10,000 to bring this thing up to road worthiness (If I sent it to DMC Florida). Do you all think that is far SHORT of what I'm gonna have to spend?

The only "restoration" this car will require is going to be directly attributed to the length of time it has been sitting & any electrical upgrades that may make sense. Visually... it's MINT, outside, inside, and underneath. No leaks of any kind either.

The rule of thumb oft quoted is $1,000 for every year that it sat. That's $33,000 for your restoration. Do I think it will actually cost that from the condition you described? No. A portion of those costs for cars that sit can be things that got destroyed from the sun, moisture, mice, etc. Interior parts missing or weather damaged, frames, fittings or fasteners rusted by moisture, wiring eaten by mice. None of that sounds like it'll apply to your car, not the big stuff anyway.

What won't be in great shape after sitting for 33 years are the systems with fluids in them. Fuel, braking, cooling, engine, transmission, A/C. The restoration will be easier if those systems were drained and stored "dry" as you said, yet the rubber seals or hoses or components will still need replacement after getting dried out. The cost of the individual parts you'll likely need won't on their own be horrible, but the volume of the ones you'll need will be noticeable. The larger number is going to be the labour to install everything. That expertise on diagnosing it all, replacing what is needed and not what doesn't, not making anything worse by learning about DeLoreans on your car, is what justifies the DMC franchise labour rate and overall expense.

I would not think it would cost less than $10,000, but not as high as $33,000. Somewhere in the middle could still be $20,000 by the time all is said and done. That number seems terribly high, but still reasonable for the most part. From A to Z, once you add the trailering costs, assessment, parts, labours, upgrades, licensing, and to get it back home to you, yea, maybe $20,000 isn't that far off. Given current prices though, you're now owner of a car worth $50,000+ I would estimate. Many owners can't claim such a thing.

hillbillysims
08-17-2016, 05:59 PM
I'm REALLY hoping it isn't in the 20K range.. it'll be hard for me to sell that to the wife..

I did crawl underneath it & under the hood... I don't see any rust issues anywhere.. it seems to have stayed insanely dry (the garage it was in had about 30ft walls.. concrete.. and it was sitting at the very back of the garage which is about 40ft from the nearest entrance.

Unfortunately... I know my grandpa.. there was nothing drained or anything.. it was simply pulled in.. parked.. and left there.

Ya'll have scared me a little... hoping for the best. (as far as transport, I will likely take it to whatever shop it goes to myself on a car trailer)

SamHill
08-17-2016, 06:06 PM
I'm REALLY hoping it isn't in the 20K range.. it'll be hard for me to sell that to the wife..

I did crawl underneath it & under the hood... I don't see any rust issues anywhere.. it seems to have stayed insanely dry (the garage it was in had about 30ft walls.. concrete.. and it was sitting at the very back of the garage which is about 40ft from the nearest entrance.

Unfortunately... I know my grandpa.. there was nothing drained or anything.. it was simply pulled in.. parked.. and left there.

Ya'll have scared me a little... hoping for the best. (as far as transport, I will likely take it to whatever shop it goes to myself on a car trailer)


If the car is as good as you say it is (have somebody from here look at it) then even a $20k bill will make you far from upside down!

Michael
08-17-2016, 06:27 PM
In a perfect world, a few thousand should get that car running like a top, but where the money might come in is how much has deteriorated. A lot of the rubber bushings, tires of course, and let's hope that the engine has not seized or the transmission (or gear box) has no issues. Judging just by how you described it, I would figure around 3 to 5k to get her road worthy.

But I wouldn't be suprised if it were more.

Rich W
08-17-2016, 07:10 PM
Near Chattanooga

Depending on actual location:

Near Chattanooga to DMC FL about 725 - 750 miles

Near Chattanooga to DMC MW about 600 - 625 miles

If you tow it yourself on an open trailer, tow it facing forward.

mluder
08-17-2016, 08:55 PM
Purely anecdotal here (and I do not want to scare you) but when I bought my car the previous owner had parked it for about 20 years. In order to get it running to sell he dropped nearly $18,000 and even then it wasn't running great.
At minimum clutch hydraulics, brake hydraulics, cooling system, and fuel system will need a through restoration especially if nothing was drained from the car.

My advice - you got a free car which you didn't have before so therefore you don't need it running immediately (as much as I know you'll want to drive it). Take your time. Investigate each system. Some maybe easy to re-establish... others may need complete overhaul. What ever you do, do not try to half-ass the repairs. Not fully cleaning the bad gas sludge from the tank could end up destroying the fuel distributor or worse and then things went from sort of bad to terrible.

Be patient... Meet some local owners... Make it a project... It will be worth it!

Cheers
Steve

Jonathan
08-17-2016, 09:11 PM
Wasn't intending on scaring you either. More just a "plan for the worst, but hope for the best" approach. Easier to go in with lower expectations and then see them pleasantly met or exceeded than the other way around.

You might do better than that low estimate. Getting a car roadworthy is usually the initial goal by many and then they get around to doing the cosmetic things later. Your car sounds like it is already cosmetically nice and getting it roadworthy might be towards the end of your list anyway.

In any case, reach out to some local owners, have them come look at your car with you, and/or go meet them and see their car. For 9,000 identical snowflakes, there sure are a lot of things you don't realize on your own car that aren't quite right until you have another car to compare it with.

David T
08-17-2016, 10:08 PM
The car will need a lot of work but what it can cost is directly affected by how much of the work you can do yourself. At a minimum you will have to do the following:
Rebuild brakes
Rebuild clutch hydraulics
Replace all fluids
Replace the tires, wiper blades, battery and struts
Clean and flush the fuel system

That will get the car to move. You may have to do some upgrades like the fuse/relay upgrade and any recalls not done. Just as soon as you can get the Title in your name you should insure it. Be sure to get whatever goes with the car like 2 sets of keys, floor mats, cover, manuals, spare parts, etc. Once you get the car moving you will have to plan on doing the cooling system and the A/C system. Inspect for rodent infestation. The front compartment where the jack is stored and the fuse/relay area seem to be popular targets. $10,000 is doable but you will have to do a lot of the work yourself to do it for $10K. Of course this is assuming the car was working when it was parked and the motor, clutch, and transmission are all basically OK. Avoid the temptation to throw some gas in the tank, a fresh battery and try starting the car. It won't and all you will do is muck up the fuel system even worse. Do not even think of driving the car on the tires. All they are good for now is to roll the car around. Just fill them with air for now. Once you get the car home give it a good wash and inspect the S/S panels and glass for any damage.

DMC-81
08-17-2016, 10:41 PM
Hi there,

Congratulations on aquiring a DeLorean.. What you got is what has been described here as a unicorn... A pristine, low mileage, well stored car...... a very cool and valuable gift from your late grandpa. It's great that you want to recommission it the right way, and enjoy it afterwards. I have the same goals with my car, which was not registered for 12 years but the engine was running well when I got it home (thanks to DMC FL). I opted to do the work myself as I wanted a restoration project.

I offer these opinions:

Assess your desire and ability to do any work yourself, and whether you have the garage space for that.

Typically, parts are roughly 1/3 and labor 2/3 of the cost to have someone else revive the car. That can help you decide whether you want to tinker a bit, or not at all.

Have someone help you assess what it needs and decide whether you want everything refurbished right away, or break it up into phases. (For budgetary and time factors). High priority tasks first ( fuel system, brakes, clutch system,cooling system etc.), medium ( A/C, fuses and Relays, window motors, recalls, etc), low priority ( stereo, LED bulbs, etc). I'm not saying that your car will need all these, but mine did after 12 years of non use to make it reliable.

In addition to assessing quality work and cost, ask whether your chosen shop has the capacity to do the work within your timelines. e.g. I was a DMC FL this summer, and they had cars lined up awaiting restoration work.

Be prepared for surprises.

Take your time if possible.

Ballpark... Yes, it costs into 5 figures to restore it right, especially if you are having someone else do it.

You have something valuable. If you intend to keep it, don't let others persuade you to sell.

Good luck, and have fun! :smile:

hillbillysims
08-18-2016, 09:43 AM
Likely... I intend to keep it.. because it was such an iconic purchase for me as a kid when my Papaw bought them. I would sit out in the garage in it, pretending to drive it for hours sometimes. It was always something I hoped to have one day.

I'm fairly mechanically inclined having owned several classic/custom cars, but I had always been under the impression the Delorean was it's own beast.

Are there any books you can buy regarding rebuild/repair/maintenance of these cars?

It will be such a good feeling to eventually have it on the road.

I'll try to get some pics soon

David T
08-18-2016, 10:36 AM
Likely... I intend to keep it.. because it was such an iconic purchase for me as a kid when my Papaw bought them. I would sit out in the garage in it, pretending to drive it for hours sometimes. It was always something I hoped to have one day.

I'm fairly mechanically inclined having owned several classic/custom cars, but I had always been under the impression the Delorean was it's own beast.

Are there any books you can buy regarding rebuild/repair/maintenance of these cars?

It will be such a good feeling to eventually have it on the road.

I'll try to get some pics soon

Call DMCH (Texas) and talk to James Espey. He wrote a book about how to buy a Delorean and it will help you learn what to do. He can also help you with your initial order of filters, manuals, struts, and other service parts. OR, you can read all of the posts in this forum, what you are planning to do has been done many times by other owners. Although the Delorean has some unusual features it is still a car and works like other cars. You will require tools, many metric. If you don't have a lift you can do what is necessary with a floor jack and jackstands. The very first system you will tackle is the fuel system. You will rip out all of the parts in the fuel tank and clean it out and replace all of the parts. Requires only a few hand tools, nothing special.

Dangermouse
08-18-2016, 10:42 AM
While there isn't a Haynes manual, unfortunately, the next best thing is a set of manuals from DMCH, or ebay.

Items 7-9 here

http://store.delorean.com/c-326-9-4-0-publications-manuals.aspx


Or just print this forum off and start reading :)

Morpheus
08-18-2016, 10:54 AM
Hi there,

Congratulations on aquiring a DeLorean.. What you got is what has been described here as a unicorn... A pristine, low mileage, well stored car...... a very cool and valuable gift from your late grandpa. It's great that you want to recommission it the right way, and enjoy it afterwards. I have the same goals with my car, which was not registered for 12 years but the engine was running well when I got it home (thanks to DMC FL). I opted to do the work myself as I wanted a restoration project.

I offer these opinions:

Assess your desire and ability to do any work yourself, and whether you have the garage space for that.

Typically, parts are roughly 1/3 and labor 2/3 of the cost to have someone else revive the car. That can help you decide whether you want to tinker a bit, or not at all.

Have someone help you assess what it needs and decide whether you want everything refurbished right away, or break it up into phases. (For budgetary and time factors). High priority tasks first ( fuel system, brakes, clutch system,cooling system etc.), medium ( A/C, fuses and Relays, window motors, recalls, etc), low priority ( stereo, LED bulbs, etc). I'm not saying that your car will need all these, but mine did after 12 years of non use to make it reliable.

In addition to assessing quality work and cost, ask whether your chosen shop has the capacity to do the work within your timelines. e.g. I was a DMC FL this summer, and they had cars lined up awaiting restoration work.

Be prepared for surprises.

Take your time if possible.

Ballpark... Yes, it costs into 5 figures to restore it right, especially if you are having someone else do it.

You have something valuable. If you intend to keep it, don't let others persuade you to sell.

Good luck, and have fun! :smile:

This. All of this.

You're very lucky in that the cosmetics of the car aren't in need of much attention. Focus on the mechanical and safety systems first, then worry about LEDs and such. Don't be afraid to ask questions, we're all here to help!

DTOUR
08-18-2016, 12:57 PM
Congrats on getting a great car in great condition.

First thing to think about - Where are you going to store or park it? It's a new member of your family now.

Then, I'd recommend you start reading here, all about the different systems and quirks these cars may have. When considering the costs involved with getting the car road worthy, remember, it is "just" a car. Contain your thoughts and don't think of the DeLorean as "OMG, it's a friggin Time Machine" - and it's in perfect condition, and I want it to be purrrrrfectly perfect! It's "just" a car! It doesn't have hover technology built in. It doesn't run on plutonium. It runs on gasoline, it has an internal combustion chamber engine. Always has, always will... (Well, almost always... Technology does change.)

It's a car - Look at what a stored car will need to run properly. Break it down to systems. Take your time and tackle each system one at a time. Clean out the fuel system to prevent gunk build up from compromising the fuel delivery to the engine. It will probably needs tires. Replace the tires with new anyway, but save your original Goodyear NCTs that are probably still on the car. Plan on flushing all the fluids. Tackle each system, one at a time.

I suggest if the car has sentimental value, and if you plan on keeping it, as it sounds like you are, that you take a longer term approach to getting the car road worthy. Spend a few months, even a year sorting the car out. The car sat for many years as is. Another year isn't going to matter now. Take your time. Since you have some automotive experience already, try tackling each system yourself, one at a time, slowly learning the nature and characteristics of them and the car in general. This will surely enhance your ownership experience. As well as your pride of ownership. You will be putting yourself "into" the car. And saving a very expensive labor rate as well. That savings will allow you to do whatever you want with the car.

Decide how you want to use the car. Will it be a daily driver? A show car? A perfect Con Course car with only original parts? Do you want to change the radio, install LED lights, convert it into a BTTF car? These questions, asked now will give you direction on what, as well as how, you do some of that work on the car. Or, have the work done to the car by someone else. You have something very special to you, gifted to you by your grandfather. Take your time with it. Enjoy it. Help is abundant for you as well, so don't see dollar signs. Think of the car as a new hobby. It will open many doors to new adventures. Savor them, and enjoy the ownership experience.

hillbillysims
08-18-2016, 02:41 PM
I've been a member of many forum/communities.. I gotta say.. this has been one of the best experiences so far & great feedback.. thank you guys so much!

I know 1 thing.. I will not be turning it into a BTTF car. I know I want it to be transformed into a very dependable car & I'll want the electrical upgrades & probably an upgraded stereo unit.

As far as customizations... it will probably be limited to nice looking exhaust tips & slightly lowered front end. Other than that, I feel like John Delorean hit a home-run on the styling of this car & see no need to change it.

Based on your suggestions, I will probably research what all I need to do on cleaning the fuel tank / fuel delivery.. maybe myself.. and depending on what the parts look like, replace some of them.

Any suggestions specific to engine and transmission before ever attempting to crank (after fuel system & lines have been cleaned out)?... I know I'll need to drain all the fluids and replace those... do you guys do any motor flushes or anything?... I don't have much experience with clutch and transmission work at all, so I will likely seek help on that for sure. I have heard of people manually turning motors without cranking them to oil them up good before the 1st crank attempt etc etc

axh174
08-18-2016, 03:01 PM
Help is abundant for you as well, so don't see dollar signs. Think of the car as a new hobby. It will open many doors to new adventures. Savor them, and enjoy the ownership experience.

I don't have much to offer beyond what has already been stated, but I do want to emphasize what DTOUR said. The kind of help at your disposal through this forum and the community in general is nothing short of remarkable. There are plenty of individuals within it who genuinely want to help for no reason other than they are wonderful human beings and possess a love for these cars. You'll find members driving hundreds of miles to help another for a weekend rebuild of a system; you'll find members at meet-ups running with tool boxes towards DeLoreans limping into the parking lot, eager to lend a hand; and you'll find minutely-detailed and thoroughly illustrated write-ups on this forum ranging from how to rebuild an engine to how to change a marker bulb. If you're ever feeling overwhelmed by a task, remember you're not alone in this amazing journey of ownership, and the memories and friendships you build are going to last a lifetime.

Welcome to the club! :cheers:

-Kevin
VIN2234

bfloyd
08-18-2016, 03:54 PM
When I bought mine, it had been sitting untouched in a guys garage for 20 years. I didn't know anything about Deloreans except that I had always wanted one since I was a teenager. Reading these forums for hours on end was the biggest asset I've gained since I bought it. Like others have said... don't even thing about trying to start it. I found a thread on here somewhere about priorities, order and procedure for bringing a car like this back to life.

I went about mine in this order....

1st year - Make it mechanically roadworthy and safe. One of the first things I bought (which is NOT on the "mechanically roadworthy & safe list) is a set of new pneumatic door struts. Hard to brag to your friends about your new Delorean when the doors are being held up with broomsticks. I actually put the jumper cables on to the car long enough to turn on all of the lights, radio, turn signals, etc. Made me giddy with excitement, made my wife think I bought a car that actually works.

YEAR ONE
In order (best that I can remember) - Washed it, vacuumed it, shined it up (just for a little confidence of what it can look like when I get done).
Cleaned out the fuel tank, replaced every single belt, hose, hose clamp, all new fuel lines, new fuel pump, new fuel accumulator, new fuel filter, new water pump, did the whole "Valley of Death" thing, new plugs, wires, distributor rotor, oil change and filter, new coolant bottle, cleaned the "sticky plunger" fuel distributor, new fuel filter, powder coated the valve covers, new vacuum lines, new radiator, auto bleeders (front and rear), new brake calipers & pads, new master cylinder, cleaned the injectors, new injector boots, had the auto trans shift computer rebuilt, new auto trans filter and gasket, and new tires all the way around.

This second year of ownership led me to the interior of the car to do more "comestic and comfort" things. (Most were not necessary, but sure made driving the car more fun... which is kinda why I bought the thing to begin with)

YEAR TWO
New leather seat covers, new touch screen stereo and dashboard/console face plate, HVAC mode switch rebuild, new speakers and wires all the way around, reverse camera system, power antenna, Cellular / GPS tracking system, all exterior lights converted to LED (except headlights), new tail light circuit boards, correct previous owner's creative wiring attempts at the fuse panel, new air conditioning compressor, hoses, accumulator, condenser, new shock cord in the cargo net.

NEXT YEAR
Next year I will more than likely replace both cooling fans (just because), new relay kit, new springs and shocks all the way around, and have the sagging headliner replaced.


I did all of the work myself over the last year and a half, with my previous mechanical experience with cars prior to Delorean ownership was changing the oil on my F150.

bfloyd
08-18-2016, 04:02 PM
I have heard of people manually turning motors without cranking them to oil them up good before the 1st crank attempt etc etc

I pulled all of my spark plugs and squirted a syringe full of "Marvel Mystery Oil" into each cylinder and followed it up with a shot of air from the air compressor. Then I let it sit for about a month or so while I did the rest of the work. While I had the fuel system out (and spark plugs) and the cooling system apart, I put a pair of jumper cables on it and cranked it over several times just to make sure the engine wasn't seized up. Turned over as smooth as butter.

hillbillysims
08-18-2016, 04:42 PM
the more I hear you guys talk.. the more confident I am getting thinking I can handle a lot of this (at least on getting it running).

I'll get pics the next time I go to grandpa's and post them. The only pics I have right now show mostly the higher mileage car (35k).. the lower mileage car is hiding behind it

dn010
08-18-2016, 04:56 PM
I wouldn't use motor flush, just drain the oil, dump a fresh QT in with the drain still open and see what comes out. Refill, run it and then depending on how bad it is change it again shorty after. After putting new oil in and prior to staring it up for the first time, I would disable the ignition so it doesn't fire up and then crank it for a few bursts, allowing the oil pump to kind of prime things before spinning at 750+ revolutions/minute.

David T
08-18-2016, 06:01 PM
One way to get started on the motor would be to pull the spark plugs and put some oil into each cylinder. Marvel Mystery Oil is good but any good light oil will suffice. Let it sit for a while. Put it into 1st gear and try moving (pushing) the car back and forth and see if the engine turns. Forget trying to use the clutch at this point. Also don't step on the brakes, they won't work either and will only lock up. The emergency brake may work though. I would not change the motor oil just yet. If anything it may need a little, same with the transmission. I would not change the motor oil or the transmission oil till I got it to run and warmed up. As for the clutch, just order a master and slave cylinder and a braided S/S line, it all has to be replaced. For the cooling system, fill with plain water when you are ready to start the motor. You will be flushing it several times before you put anti-freeze back in.
We are getting way ahead of ourselves here. Right now the most important thing is to get your paperwork in order and get insurance on it.

burch
08-18-2016, 06:37 PM
I've been a member of many forum/communities.. I gotta say.. this has been one of the best experiences so far & great feedback.. thank you guys so much!

Agree with this, wholeheartedly. The overwhelming majority of my interactions on here have been positive and enlightening.

Ron
08-18-2016, 07:26 PM
I have inherited a basically brand new Delorean from my grandfather & need advice on what steps need to happen to make it totally roadworthy/dependable because I plan to drive it regularly. I just want to do it right.

:welcome:

...great advice in the thread. Particularly:

Do not let ANYONE try to start it.

Check out SEDOC (http://dmctalk.org/forumdisplay.php?32-The-Southeastern-DeLorean-Owners-Club-(SEDOC))...we are currently procrastinating when/where to set an overdue meet (SOP ;-)

mluder
08-18-2016, 07:27 PM
Are there any books you can buy regarding rebuild/repair/maintenance of these cars?


As mentioned there are no Chilton or Haynes manuals for the DeLorean... There are however guides for the generic PRV engine (Volvo cross referenced) as well as guides for the Bosch injection system.
I have them somewhere in digital form... I'll see if I can find them.

Cheers
Steven

dn010
08-18-2016, 07:28 PM
Who needs a manual when you have the forum!

Check out the resource section and you will find a plethora of documentation.

http://dmctalk.org/showthread.php?2866-Searchable-Workshop-Technical-Bulletins-and-Volvo-Engine-Manuals

Sent from my XT1254 using Tapatalk

Jonathan
08-19-2016, 08:51 AM
Are there any books you can buy regarding rebuild/repair/maintenance of these cars?

Don't forget about the Knowledgebase articles on the DMCH website. They cover most of the everyday topics we chat about on here.

http://support.delorean.com/KB/browse.aspx

Andrew
08-19-2016, 12:14 PM
While DMC only made one model, each restoration is different. When it comes to the cost of a restoration, the sky is the limit. For example, I brought 5052 back to life after 23 years of storage. My total cost to get the car running and drivable was around $2,000.00. This included a carb conversion, new clutch and brake masters, new caliper seals amd all new brake hoses. Ive done some upgrades to the exhaust amd front end since. In over 6,000 miles of driving, it has not stranded me once.

Aside from the carb conversion, there was no special secret to 5052's budget restoration. I simply did the work myself and used the forums as a resource.

Best of luck,

Andrew
4194
5052

David T
08-19-2016, 01:27 PM
While DMC only made one model, each restoration is different. When it comes to the cost of a restoration, the sky is the limit. For example, I brought 5052 back to life after 23 years of storage. My total cost to get the car running and drivable was around $2,000.00. This included a carb conversion, new clutch and brake masters, new caliper seals amd all new brake hoses. Ive done some upgrades to the exhaust amd front end since. In over 6,000 miles of driving, it has not stranded me once.

Aside from the carb conversion, there was no special secret to 5052's budget restoration. I simply did the work myself and used the forums as a resource.

Best of luck,

Andrew
4194
5052

I would say your case is kind of extreme. Even doing all of your own work, $2K is not usually enough to get all of the systems going. Tires alone can take up a big chunk of that and that's just one item. I wonder just how much you can really save converting to a carb as opposed to getting the K-Jet system going. In both cases you have to clean the fuel tank and replace all of the internals. Typically what is necessary to get the fuel system going is you replace all of the fuel tank internals, unstick the plunger in the distributor, clean or replace the fuel injectors, and maybe the Control Pressure Regulator.

hillbillysims
08-19-2016, 02:52 PM
I plan if possible to NOT convert anything on the engine from the OEM setup.. unless it is a well known failure point. I'd rather restore back factory original. Other than electrical upgrades which I mentioned earlier, I will definitely do those.

I hadn't heard the term "K-Jet" but I'll read up on it now. I hate it is going to be 11-12 months til I get the car, I am eager to start working on it now

81dmc
08-19-2016, 03:26 PM
I hadn't heard the term "K-Jet" but I'll read up on it now. I hate it is going to be 11-12 months til I get the car, I am eager to start working on it now

Bosch K-Jetronic is the fuel injection system used on our cars. You may want to look at one of the Mercedes forums for troubleshooting since many 1980's Mercedes used the same system.

David T
08-19-2016, 06:03 PM
There are a lot of known failure points and there are upgrades/solutions for all of them. Before getting into all of them you need to get the car, go over in detail to see what you actually have and then decide what you want to do. I would try to get it to run first and foremost. All of the upgrades and improvements can be done later. Too bad you have to wait so long till you can get it. In the meantime make sure it is insured and safely stored. If possible remove the battery and wipe out the gas tank. Air up the tires and try to collect everything that goes with the car and put it all together in one spot. Cover it and make sure nothing can fall on the car. Don't spend a nickel on it till you have the Title in your name.

Jonathan
08-19-2016, 07:14 PM
One thing I meant to mention earlier would be how valuable having the whole car assessment done at a DMC franchise. If I'm not mistaken, for $300-$400, they will go over your entire car and create you a report with all of the things that could stand to be addressed and the costs of doing so (parts and labour) beside it. Regardless of what or how you eventually restore the car, this could be the best money you spend right off the hop.

DTOUR
08-20-2016, 12:08 AM
the more I hear you guys talk.. the more confident I am getting thinking I can handle a lot of this (at least on getting it running).

I'll get pics the next time I go to grandpa's and post them. The only pics I have right now show mostly the higher mileage car (35k).. the lower mileage car is hiding behind it

Yes, you CAN do everything mentioned so far by yourself. I'm sure someone (or more) will also make themselves available to you once you get the car and start bringing it back to life. Just ask.

When you see the car again, flip the passenger seat forward, and under the rear parcel shelf, lift up the corner of the carpeting. There is a removable wood panel there. Under that piece of wood is where the fuse box and the relays live. If not done so already, REMOVE THE FUSE BOX COVER from the fuse box. This will reduce the likelihood of heat buildup on the fuses and help prevent melting of the fuse box. This has been known to happen - let's just say more than once - with these cars. That fix is free. Just pop the cover off and put it next to fuse box. Check for anything obvious burned up while in there. You probably won't see anything alarming on a car with 1250 miles, but pop that cover off the fuses if it is still covering them.

Eventually, you will be cleaning contacts on those fuses, and the relays that live nearby. Don't bother with that now, but do get that cover off to the side and off the fuses. Then, read up on what lives where and what it does, electrically. You will be visiting this area - a LOT! Cleaning, testing, measuring voltages, etc... A happy fuse box makes life a whole lot simpler.

cdrusn
08-20-2016, 03:00 AM
Right from the factory the Delorean was a good running well designed car. If kept up to even minimal maintenance standards it will serve the owner well. The upgrades sponsored by the vendors can mostly improve on the car's reliability but really it is best to bring the car back to factory specs and then drive it and see what fails or doesn't work well. You can spend thousands on "improvements" only to find that the car was originally well designed. Just get it running and then drive the hell out of it and see what works and what doesn't.

Lwanmtr
08-20-2016, 04:17 AM
:welcome:

Congrats on the inheritance...sorry about your loss, though.

I dont have too much to offer..other than as a relative newbie to the restoration scene, I can say dont get too overwhelmed. Taking it to one of the DMC shops for a thorough going through is defiately a good idea...might find its not as bad as it looks :)

Browsing the forums is a good source for nearly any info you need too.

dmruschell
08-21-2016, 01:08 AM
If you've owned other classic cars and are somewhat mechanically inclined, definitely do the work yourself. You'll save a LOT of money.

5 years ago, I inherited a 1961 Corvette, which started me on a path of owning and driving exclusively classic cars. My newest is my DeLorean. I also knew next to nothing about working on cars, but have learned a lot from this community, which has given me confidence to work on my other cars.

I'm located in MD, which is next to VA, but I'm not sure how much help that will be once the car is moved to TN.

I'm currently helping someone I met through the community get his car running. It's been sitting for 8 years, and sat for 10+ years before that. I had him clean out the fuel tank, we had his injectors replaced or cleaned, fuel lines cleaned, and are working on getting a working fuel distributor (engine will run, but plunger in the distributor doesn't move freely, so the air valve must be moved manually). Once it's running, we will be replacing all of the fluids and updating what needs to be updated to get it on the road.

The only difference between the DeLorean and any other classic car that's been sitting is the fuel system. Read up on how the KJet system works, and you'll be able to better diagnose and repair the system. Other than that, it's just a car with a very supportive community.

Lwanmtr
08-21-2016, 02:18 AM
Yeah, definately get to know the k-jet system...and the proper vaccuum routing. My line were going in all the wrong ways..so wrong that Toby at DMCNW was surprised my engine was trying to run as good as it was (they of course fixed all that).

81dmc
08-21-2016, 10:57 AM
Right from the factory the Delorean was a good running well designed car. If kept up to even minimal maintenance standards it will serve the owner well. The upgrades sponsored by the vendors can mostly improve on the car's reliability but really it is best to bring the car back to factory specs and then drive it and see what fails or doesn't work well. You can spend thousands on "improvements" only to find that the car was originally well designed. Just get it running and then drive the hell out of it and see what works and what doesn't.

It's all fun and games "driving the hell out of it" until a fuel line breaks, the fuse box melts on the road, or the engine overheats from the failed fan fail.

Andrew
08-21-2016, 05:26 PM
I would say your case is kind of extreme. Even doing all of your own work, $2K is not usually enough to get all of the systems going. Tires alone can take up a big chunk of that and that's just one item. I wonder just how much you can really save converting to a carb as opposed to getting the K-Jet system going. In both cases you have to clean the fuel tank and replace all of the internals. Typically what is necessary to get the fuel system going is you replace all of the fuel tank internals, unstick the plunger in the distributor, clean or replace the fuel injectors, and maybe the Control Pressure Regulator.

I agree that 5052's case is rare. Specifically, I lucked out by finding a complete Peugeot fuel system from the intake to the air cleaner for $250. Additionally, the mechanical pump was $45 and the new lines, random fuel hose and a new fuel tank boot set me back about another $100. However, I was also able to recoup some of my costs by selling off the core K-Jet parts.

On an aside, by cross referencing the brake and clutch master along with the brake hoses, I saved a couple hundred dollars.

I would add that safety and reliability are always a top priority, tires and cooling hoses should be inspected / replaced before any distance driving.

Nuclearbacon
09-29-2017, 04:12 PM
So! It's been about a year! Any news on this AMAZING Story???

opethmike
09-29-2017, 04:24 PM
So! It's been about a year! Any news on this AMAZING Story???

53704

hillbillysims
09-29-2017, 04:45 PM
Everything is still tied up. I hope soon. I plan to talk to my grandmother about it soon. I'm antsy to get started. Honestly I haven't pushed it because I don't have a place to put it out of the weather yet. Meeting with a contractor next week to build a 3-car garage in preparation of starting this restore. I will definitely post an update when I am able to pick it up!

hillbillysims
09-29-2017, 04:47 PM
By the way, is there any kind of cross-reference book or chart for parts that will work on the DMC from other makes for potential savings?

opethmike
09-29-2017, 04:50 PM
By the way, is there any kind of cross-reference book or chart for parts that will work on the DMC from other makes for potential savings?

There's a whole sub-forum for it on here.

hillbillysims
09-29-2017, 04:53 PM
There's a whole sub-forum for it on here.

Thanks buddy... That will be helpful. I'm so friggin excited about this car. Its been really hard to wait this long

hillbillysims
09-29-2017, 05:02 PM
I did snap a pic of them the last time I was up. The car on the far end is a really old Rolls Royce with suicide doors... you drive it from the right hand side & I think it has a straight-10 in it. Maybe a straight-8? Its huge though.

53705

DMC5180
10-01-2017, 01:58 PM
Be advised that the Cross-reference parts list was compiled mostly back in the 80's through the owners club network to help owners with service parts during the period of uncertainty. (83-95) Pre internet. Several Brands or Part numbers don't exist anymore. A lot of workaround hacks were done on cars back then due to a lack of servicing dealers. Present day parts availability is nothing like it was back then. We now have great resources to parts through the Vendors. In many cases, priced competitively, or even cheaper for the really common stuff, because they have a lot of excess inventory that sees little movement because it's easier to try and get Locally. I have used my local parts store in a pinch but it has been on a very rare occasion.

It's also rather annoying going into a parts store nowadays when, You know what you want and tell the kid behind the counter the description and part number of the part and they respond with "What kind of Vehicle?" to which you say, a 81 Delorean to which they have no listing or anything beyond spark plugs, oil filters and belts, if that. All I'm saying is, trying to find something locally usually ends in failure. If, you want to replace All your fuses or something easy like that by all means go for it. Beyond the really easy stuff, stick with the vendors. Its much less of a headache and your parts will fit without modification.

OverlandMan
10-01-2017, 09:03 PM
It's also rather annoying going into a parts store nowadays when, You know what you want and tell the kid behind the counter the description and part number of the part and they respond with "What kind of Vehicle?" to which you say, a 81 Delorean to which they have no listing or anything beyond spark plugs, oil filters and belts, if that.

Yep. How I usually navigate that whole scenario is telling them its for a custom application and never even mentioning "DeLorean".

I have an 85 Silverado pickup with a motor from a 71 C10. I've had the same issue with that prior. Some of those guys can be down-right argumentative.

DMC5180
10-01-2017, 09:52 PM
Yep. How I usually navigate that whole scenario is telling them its for a custom application and never even mentioning "DeLorean".

I have an 85 Silverado pickup with a motor from a 71 C10. I've had the same issue with that prior. Some of those guys can be down-right argumentative.

Actually I normally use Custom application, especially if its a new kid. I’d rather not get into a discussion about the Delorean.
This is only when I need to visit an auto parts store other than my usual place.

I do have a favorite local auto parts store that I use for my other vehicles needs. There was an older gentleman (season ed veteran) that ran the counter. I always enjoyed talking with him. He was very down to earth and knowledgeable. Unfortunately, he retired a couple years ago. But the 2 ladies that took his place since then are pretty good too. They are willing to research my odd requests be digging into the old school books.

David T
10-01-2017, 11:00 PM
In any of the chain stores if they can't look up a SKU on their computer they are completely lost. The smaller independent shops usually have more knowledgeable people that are willing to help and still have an old set of books. But even with that, many of the cross/refs are no longer any good and/or those vendors are out of business or no longer stock the parts, they got too old and not enough turn-over. And if they have to get it from the warehouse you can probably get the right part quicker by ordering it from a "D" vendor. Often for the same price or less. The cross/ref parts are getting more and more "universal" too to further reduce inventory. While it may fit it doesn't fit right or may require modification. Bottom line, patronize your favorite Delorean vendor, it is good for all of us and them too. Just imagine what we would have to do if we didn't have them. Oops, you don't have to, just go to your local parts store! You can't even tell them it's a Delorean!

hillbillysims
12-26-2017, 12:31 PM
Its been a while since I last posted... but I finally received word that the Delorean is free for me to come pickup and transport back to Tennessee. I am so excited about getting my grandpas car back on the road. It looks so darn nice, its amazing to see something that looks brand new but realize there is a lot of things in front of me to address.

Michael
12-26-2017, 01:23 PM
Its been a while since I last posted... but I finally received word that the Delorean is free for me to come pickup and transport back to Tennessee. I am so excited about getting my grandpas car back on the road. It looks so darn nice, its amazing to see something that looks brand new but realize there is a lot of things in front of me to address.
Shoot me a PM when you get it. I live right off I-81. I may have a few parts I could give you.

David T
12-26-2017, 10:53 PM
While it may be "free" to you there may be fees to get the Title into your name. Be sure to get ALL of the paperwork along with the car. Find out just exactly what you must have so you can get it right. Get in touch with your State DMV agency and find out. Try to put insurance on the car before you even move it. All it takes is the VIN, some pictures and money.

hillbillysims
01-18-2018, 10:19 AM
I posted probably 2 years ago about a Delorean I was supposed to inherit from my grandfather but the estate was still being settled.

I was finally able to go pick it up & witness it being pulled out of the warehouse where it had been stored for 34 years without ever being moved. I wasn't real sure what I would be faced with but it turns out it is in incredible condition after a good cleaning. Currently I plan to take it to DMC to have them go through the engine & replace everything that may need replacing

Here are a few pics. He bought it new in 1982. It is an '82 model, built in Dec 1981 (I thought it had 1,200 miles... but turns out it has 3,950 miles. Still very low). 5 speed with gray interior. Original NCT tires actually look brand new.

55103551045510555106551075510855109551105511155112 5511355114551155511655117551185511955120

Delorean Industries
01-18-2018, 10:54 AM
Congrats! We are located a little north of you. Let us know if we can assist you in making the car road worth again!

-Josh Bengston
DeLorean Industries

cis6409
01-18-2018, 11:00 AM
That s amazing , congrats on the purchase great story
Best of luck with it !

Cheers
Shane

David T
01-18-2018, 12:06 PM
With all of the experience they have resurrecting Deloreans you should be able to get a pretty good quote on just what needs to be done and how much it will cost BEFORE they start working on it. You should ask for that and hold them to it. Also have some idea of when it will be finished. There should be some kind of warranty on the work too. It will not be inexpensive. You need to plan for the expense and either work out a payment plan or some other way to pay for this. While the car may look good there will be a lot of work necessary. Thousands of $$$$ in fact. As important as the work on the car is, the paperwork is also important. You need to get the Title and the executor of the Estate must sign it over to you so you can Title it in your name. You should also insure it right away at least for theft and damage.

hillbillysims
01-18-2018, 12:27 PM
All the ownership/title stuff is already worked out... executor has provided all that and signed the stuff the state DMV required me to get. I insured it before I ever put it on a trailer to bring it home.

I am however very curious for a ballpark idea on what I'll be looking at to get it running, replace all hoses/lines. fuel pump stuff.. service transmission/clutch as needed... update electrical stuff & replace all necessary brake components.

I have no idea if I am looking at $5000 or $20,000.... It would be nice to have a ballpark idea


With all of the experience they have resurrecting Deloreans you should be able to get a pretty good quote on just what needs to be done and how much it will cost BEFORE they start working on it. You should ask for that and hold them to it. Also have some idea of when it will be finished. There should be some kind of warranty on the work too. It will not be inexpensive. You need to plan for the expense and either work out a payment plan or some other way to pay for this. While the car may look good there will be a lot of work necessary. Thousands of $$$$ in fact. As important as the work on the car is, the paperwork is also important. You need to get the Title and the executor of the Estate must sign it over to you so you can Title it in your name. You should also insure it right away at least for theft and damage.

Delorean Industries
01-18-2018, 12:29 PM
Feel free to email us and we can provide a detailed quote of what it normally takes to bring a car back to life.

[email protected]

Dangermouse
01-18-2018, 01:41 PM
Just out of curiosity, why does it have 2 different plates front and rear on it, from two different states?

DMC-81
01-18-2018, 02:06 PM
Congrats on getting the car! It looks incredible!

hillbillysims
01-18-2018, 02:17 PM
The tag on the front is my papaws. I left it on there for now. The car was in Virginia, I'm in Tennessee


Just out of curiosity, why does it have 2 different plates front and rear on it, from two different states?

hillbillysims
01-18-2018, 03:18 PM
new thread created. WITH PICS! Brought the car home....1st time it's been out of the warehouse & outdoors in 34 years

David T
01-18-2018, 04:04 PM
If it doesn't require much cosmetic work and you have all of the work done by others, it is closer to $20,000 than $10,000. The more you can do yourself the lower the cost.

Doogie
01-18-2018, 04:53 PM
Congrats! You will love being a Delorean owner!

I got my car (#3589) from my wife's Aunt's estate, was parked for 25 years in the back of her garage, covered in blakets, much like yours.

I spent about $4000 getting it back in the road, but I did most of the work myself with the help of the Delorean Club of Ohio, and parts from DMC-MW. I think the most expensive single aprt was the fuel distributor ($550?), and tires ($600-$700?). Fuel line kits, Cleaning the fuel tank, rebuilding the brakes. First start was super cool, but not complete...

2nd start, after replacing injectors and other stuff was better...

https://www.youtube.com/watch?v=PzE48_F7nQE

3rd start was the charm after replacing Fuel Filter and plugs...

https://www.youtube.com/watch?v=6yPfOLgiGLE

Finally, the piec' de' resistance'...

Our very first parade!!

https://www.youtube.com/watch?v=aL0-fCwl6R8

It wasn't hard. I had great teachers and friends though. The DMC club will help you get it back running...

Doogie

Lwanmtr
01-18-2018, 05:29 PM
Link?

JETS 81 DMC
01-18-2018, 06:07 PM
Link?

http://dmctalk.org/showthread.php?16150-Delorean-pulled-from-dry-storage-after-34-years-not-seeing-the-light-of-day

Lwanmtr
01-18-2018, 06:14 PM
Yaay congrats on getting it out in the light :)

mluder
01-19-2018, 04:21 AM
I'm curious about the tail pipes... Some one must have put an aftermarket exhaust on it at some point as I think all stock tips are straight cut.
I could be wrong and someone will no doubt correct me if I am.

Anyway, congrats!

Cheers
Steven

Jonathan
01-19-2018, 10:06 AM
I'm curious about the tail pipes... Some one must have put an aftermarket exhaust on it at some point as I think all stock tips are straight cut.
I could be wrong and someone will no doubt correct me if I am.

Anyway, congrats!

Cheers
Steven

Exhaust tips changed somewhere in the production chronology. It isn't a specific VIN that had straight tips and then these slanted ones later. More like by year, but then that wasn't true for all cars either.

http://store.delorean.com/p-10377-late-style-exhaust-tip-rh.aspx

55128

(Screen capture is from the Concours manual).

hillbillysims
01-19-2018, 10:33 AM
exhaust and tips
5512955130551315513255133

BladeBronson
01-19-2018, 06:44 PM
I'm curious as to the VIN. Mine is also a December '81 build '82 model year.

hillbillysims
01-19-2018, 07:13 PM
55136


I'm curious as to the VIN. Mine is also a December '81 build '82 model year.

Alex Brooks
01-19-2018, 07:35 PM
55136

Really close to my Vin too 10020 a dec 81 but an 82 car.

mr_maxime
01-19-2018, 07:57 PM
My vin is 10201 and I've got slanted tips. DMCMW Dave said this is the stock muffler style for '82s

BladeBronson
01-20-2018, 11:48 AM
55136

I’ve never seen this radio interference badge before. Judging from the photos at: http://www.citizenkidd.com/dmc/pages/vins.asp?start=10001&stop=15000, it appears that this was done for about a week with the first ~350 ‘82 cars. Anyone know the story with that?

Jonathan
01-20-2018, 02:47 PM
I’ve never seen this radio interference badge before. Judging from the photos at: http://www.citizenkidd.com/dmc/pages/vins.asp?start=10001&stop=15000, it appears that this was done for about a week with the first ~350 ‘82 cars. Anyone know the story with that?

I can't say for certain it was specifically for the Canadian spec cars, but I believe that radio interference label was part of the small list of changes for the 17,XXX VIN cars that came to Canada. These had been 12,XXX VIN cars before the changes that included a metric instrument cluster and a few other things. Not sure what other cars got that radio interference label, either on purpose or unintentionally. The VIN chronology isn't exactly the most consistent thing in the world, as you know.

David T
01-21-2018, 02:22 PM
I can't say for certain it was specifically for the Canadian spec cars, but I believe that radio interference label was part of the small list of changes for the 17,XXX VIN cars that came to Canada. These had been 12,XXX VIN cars before the changes that included a metric instrument cluster and a few other things. Not sure what other cars got that radio interference label, either on purpose or unintentionally. The VIN chronology isn't exactly the most consistent thing in the world, as you know.

The logic that the radio label was for Canadian cars doesn't work. That would mean that it would only be put on cars with metrics like the speedo. I have seen that label on non-metric cars. The VIN chronology, for the most part, is pretty close. Exceptions arise from what happened at the QAC centers, the '83's and what dealers and owners did after the cars were built.

Michael
01-21-2018, 02:50 PM
The logic that the radio label was for Canadian cars doesn't work. That would mean that it would only be put on cars with metrics like the speedo. I have seen that label on non-metric cars. The VIN chronology, for the most part, is pretty close. Exceptions arise from what happened at the QAC centers, the '83's and what dealers and owners did after the cars were built.

Using words like "logic" to try and justify logistics at the DMC plant is a bit illogical.

opethmike
01-23-2018, 11:02 AM
Using words like "logic" to try and justify logistics at the DMC plant is a bit illogical.

But he inflated his tires and checked the service manual!

mr_maxime
01-23-2018, 09:32 PM
VIN 10201 does not have that interference badge above the vin.

FABombjoy
01-23-2018, 10:46 PM
10270 does.

It's frequently the first detail that other DMC owners notice. I've been asked if it was a Canadian car before, so that rumor seems to be well circulated.

Dangermouse
01-24-2018, 09:33 AM
I’ve never seen this radio interference badge before. Judging from the photos at: http://www.citizenkidd.com/dmc/pages/vins.asp?start=10001&stop=15000, it appears that this was done for about a week with the first ~350 ‘82 cars. Anyone know the story with that?

Interesting that it isn't all 350 cars, just about 80% of them. Those 10xxx cars that were revinned as 15xxx cars also kept the radio interference plate, well, those that had them already.

I didn't find any 12xxx cars with it, but as Jonathan says, several 17xxx cars.

And a small few have the radio plate at the bottom of the VIN plate rather than at the top. Because, why not.


After a bit of googling, I found this IEEE standard:

C95.1-1982 - American National Standard Safety Levels With Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 300 kHz to 100 Ghzwhich perhaps was the instigator for all this.

Perhaps the original Craig radio didn't have such a compliance sticker but the later ASI ones did, thus rendering a secondary label un-necessary? Interestingly the ASI radio became standard at around 10305.

I wonder if those with the radio plate have a Craig and those in this 10xxx window without the radio plate have an ASI radio?

FABombjoy
01-24-2018, 11:14 AM
I don't think it's related to the radio. Probably the ignition system as it has huge potential for RFI if not properly designed. The radio would have had FCC type acceptance separately and it's enclosed in a full metal cage and installed into a second metal cage.

The exact phrase brings up some funny stuff, including notes regarding Canadian RFI compliance from Toro.

https://www.google.com/search?q="compliance+with+radio+interference+regulations"

Like RFI certified spark plugs, and an RFI certified nut :D



C95.1-1982 - American National Standard Safety Levels With Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 300 kHz to 100 Ghz
If the AC doesn't work on a summer day it might feel like a microwave oven, but there isn't anything on a car that can generate RF levels of concern. If there is, you'll feel it in your eyeballs first :D

David T
01-24-2018, 05:39 PM
Just a guess here but if it is for Canada and they want the car certified as to interference, it is meant to mean the car won't emit "noise" (interference) with anyone elses's car radios. That would be the purpose of the caps all over the car, the resistor spark plugs, and the shielded distributor to coil wire.

hillbillysims
10-10-2021, 03:34 PM
Well guys, its been a long time since I started this post on the delorean I inherited. I FINALLY got, hauled it home and got the title all changed over to my name I was wrong, it didnt have 1,248 miles. It had about 3,900 miles.. which is still great. It's truly a time capsule. It had never been outside to see the light of day since 1983. Sat in totally dry, dark storage all those years until I picked it up. The bad part is I havent had time to really get to work on it yet. I've just cleaned it up real good, fixed the door lifts and very minor things. I've not had time to clean the fuel system out or do any of the pre-checklist items leading up to a 1st start-up attempt. But I am beyond happy to have my grandpa's car and determined to get it rolling. I wish there was a good delorean mechanic near chattanooga that could help me out as I work about 75-80hrs a week.

Here are some pics. Original tires and all.
67229
67230
67231
67232
67233
67234

mhanch
10-10-2021, 04:18 PM
Looks great! my dad had mine since 1992 and also stored it well - they did use it just a bit - putting about 5000 miles on it between 92 and '19. Congrats on a great car!

DMC-Ron
10-10-2021, 07:20 PM
Anthony,
Congratulations on a great looking time capsule. Your car is remarkably similar to mine. My car had just over 3000 when purchased from the estate of the original owner. I was lucky in that the car was at least started and driven a short distance periodically. Even so, there were a lot of things that needed to be addressed. Most of the brake calipers were corroded and the brake / clutch system needed to be flushed, master cylinders replaced etc. Obviously, the original tires needed to be changed even though the tread looked brand new. People told me to keep the original tires, which I've done taking the best found advice from the tire websites for storage. The car has never had a drop of ethanol gas so luckily, the fuel system was pristine. It always starts immediately and runs well. The original dwell adjustment seal is still in place. But here’s the rub, inheriting a car like this is a double edged sword. On the one hand it’s a privilege to have such an original example. But the dilemma is whether to continue to preserve the car, or make it a driver. So far, I’ve split the difference, opting to fix and apply reversible upgrades which allow me to safely drive the car. But I do so judiciously.

Best of luck and congratulations.
Ron

Michael
10-10-2021, 07:51 PM
I absolutely love the fact that you want to do right by the car and your grandfather. Most would just want to flip it and to be honest that's not a bad thing either since the one who wants the car the most will eventually end up with it...It's just refreshing to see that someone gets the car who respects the marque and happens to be in the family. Makes for a great story.

Beautiful car and I am in upper East TN (Kingsport to be exact). I'm not close but feel free to PM me and maybe I can help with any issues that may arise.

Helirich
10-11-2021, 10:09 PM
Good news! I'm sure you will enjoy the car.

Courious about the delay. Was it all probate and lawyers?

mhanch
10-11-2021, 11:40 PM
Anthony,
Congratulations on a great looking time capsule. Your car is remarkably similar to mine. My car had just over 3000 when purchased from the estate of the original owner. I was lucky in that the car was at least started and driven a short distance periodically. Even so, there were a lot of things that needed to be addressed. Most of the brake calipers were corroded and the brake / clutch system needed to be flushed, master cylinders replaced etc. Obviously, the original tires needed to be changed even though the tread looked brand new. People told me to keep the original tires, which I've done taking the best found advice from the tire websites for storage. The car has never had a drop of ethanol gas so luckily, the fuel system was pristine. It always starts immediately and runs well. The original dwell adjustment seal is still in place. But here’s the rub, inheriting a car like this is a double edged sword. On the one hand it’s a privilege to have such an original example. But the dilemma is whether to continue to preserve the car, or make it a driver. So far, I’ve split the difference, opting to fix and apply reversible upgrades which allow me to safely drive the car. But I do so judiciously.

Best of luck and congratulations.
Ron

+1 to Ron's approach. Mine is also mostly original but i'm doing what it takes to keep it a driver. I'm higher miles however at close to 52k. (46k of which was before 1992 - first owner drove a lot but took great care of it)

TTait
10-12-2021, 03:15 AM
Now that you have it - a few rules to help keep you out of trouble...

Do not try to start the car yet - as I think you know you must clean out the fuel tank perfectly and flush the lines before you even think of trying. see http://dmctalk.org/showthread.php?637-How-To-Clean-out-fuel-tank-and-flush-fuel-system-BEFORE-you-try-to-start-the-car&highlight=Chemtool

Be very careful when you try a fresh battery - you might want to pull all the fuses first and put them back in one at a time. Probably pull the battery back out an put it on a trickle charger when you are done- its going to be a while before its running anyway.

Do not lock the doors and close them with the batter installed - the lock controller will often fail and keep your locks closed so you cannot unlock them until the battery is disconnected, and the battery is inside the car - in the meantime your solenoid is burning up.

Keep a close eye on the door locks and latches in general - make sure the latches aren't already closed when you go to close the door, and that they will open again smoothly.

Your door struts are useless, and the doors are HEAVY. Be careful. While the vendors sell high quality door struts you can get a $20 set of door struts on Amazon that ill probably last you at least a year until you can get higher quality ones and you can generally get some next day.

Avoid latching your hood and engine cover so that you will rely on the cable releases - if the cables break you will be quite unhappy. Its easy to run a cheap backup hood release cable.

Do not drive on those tires when you get it running. You can sell them to someone here for a coucours car - but don't dare trust them for actual driving.

Check for wiring, cables and hoses that may be near or touching the suspension, steering, and particularly the exhaust system. Once you do get it running you don't want to melt anything.

Check the wiper blades carefully before cycling the wipers - the blades may be badly deteriorated by age or metal may be touching the glass - do not scratch your windshield. Similarly inspect around the drop glass before you try to lower it.

Read up on the angle drive - its probably either failed or about to fail - not sure if you can try to lube a factory original one but its best to look into it before the car hits the road.

Don't trust the wheel bearings for any more than a slow drive around the block until you know what condition they are in. I had a friend who lost a car to a fire due to overheated bearings.


Its easy to get excited - but just go slow and careful like a mechanical-archeologist and you will actually get to driving and enjoying the car a lot faster than if you don't rush and break things.