Help! Cooling fan circuit breaker wiring where does this wire go??

[DKDMC]

Help!

I am completing the relay kit upgrade. When I got to the cooling fan circuit breaker replacement I realized one of the bottom two 45540aux wires were connected to absolutely nothing. Maybe this is why my cooling fans don't work at all. Ha! However I have no idea where it goes. The fan relay perhaps? The photo is looking down on the circuit so the upper wires are batt and lower wires are aux... The yellow wire is not connected to anything.

[Bitsyncmaster]

Cooling fan breaker should only have two wires. The blower circuit breaker has the 4 wires if your car has the recalls done.

[DKDMC]

Cooling fan breaker should only have two wires. The blower circuit breaker has the 4 wires if your car has the recalls done.

You are right. My mistake. Blower circuit it is. Where should this wire be going?

[DMC5180]

That extra yellow wire should have been brown. It goes from the fan thermal trip breaker to terminal 30 of the start inhibit relay.

If you were pulling relays, it's likely the terminal was the wrong type for the housing and fell out of you removed that relay.

Dennis

[DKDMC]

That extra yellow wire should have been brown. It goes from the fan thermal trip breaker to terminal 30 of the start inhibit relay.

If you were pulling relays, it's likely the terminal was the wrong type for the housing and fell out of you removed that relay.

Dennis

Awesome. Fixed. Hugely appreciated