Flasher/Hazard Relay

[pshoremo]

Hi everyone, quick question. I'm working on figuring out why I can't get the flashers/turn signal to work. I checked the fuses and everything is good there. I'm now at the relay up under the dash beside the steering wheel. I would like to jump the relay to see if that is the problem. Does anyone know which terminals I should to see if the relay is working or not?

Thanks!

[Lwanmtr]

Im not sure about which to jumper on the relay. But it is a cheap enough part to just replace, which I did because I wasnt having flashers or turn signals..and got the relay that will handle led lgiths.

[DavidProehl]

I also am not sure what the jump would be, but I replaced my flasher relay last week with this one from SuperBrightLEDs: https://www.superbrightleds.com/moreinfo/car-install-supplies/cf13gl-02-led-bulb-electronic-flasher/782/

Works great and it cheap.

[burch]

Replaced mine last year with the same item from SuperBrightLEDs...and it is awesome. Watch out when you pull your old relay from under the dash, though. My relay socket basically disintegrated, but a new socket was a local Napa part.

[Farrar]

I bought my replacement flasher unit AutoZone and saved shipping: Tridon EP-35 (https://www.amazon.com/Tridon-EP35-Flasher/dp/B00064LQL2) (linked for photo reference) will flash incandescents or LEDs.

[pshoremo]

I bought my replacement flasher unit AutoZone and saved shipping: Tridon EP-35 (https://www.amazon.com/Tridon-EP35-Flasher/dp/B00064LQL2) (linked for photo reference) will flash incandescents or LEDs.

Thanks for the responses. I'll pick up a new one this week and hopefully that does the trick.