Log in

View Full Version : Engine What kind/brand of coolant do you use?



vwdmc16
08-24-2016, 01:14 AM
Starting a poll about what everyone uses to keep their Delorean cool. Local auto parts universal green of something else, anyone use a waterless coolant?

cdrusn
08-24-2016, 01:25 AM
I have always changed my cars cooling systems over to steamed distilled water and (orange) prestone dexcool. Corvette uses dexcool so it must be good enough for them.
I run dexcool in my: 1984 Porsche 928, 1996 BMW 850 Ci (12 cylinders), 2005 VW Jetta and my 1982 Delorean. Never had a problem. Dexcool is a 5 year coolant, I have personally seen what happens to a Mercedes Benz 450SL that ran green coolant was wasn't changed out every 2 years as required, the coolant ate big holes in the steel heads and destroyed the engine. :race:

Farrar
08-24-2016, 02:27 AM
Pre-mixed green stuff, house brand from the auto parts store. Since it ends up mixed with my engine's oil, I figure there's no need to splurge. :(

Josh
08-24-2016, 03:18 AM
I run the cheapo green stuff. Mix it myself as I am cheap!

Lwanmtr
08-24-2016, 06:17 AM
Green stuff...if its on sale I get the pre mixed. Never tried the orange stuff...but it reminds me of Tang, which I used to like..so maybe I'll try it sometime.

DMC-81
08-24-2016, 07:05 AM
Hi there,

I used Prestone concentrate, and bought distilled water to mix it with. 50/50. It's also available in premixed.

45672

It works very well for me.

steve
08-24-2016, 08:35 AM
Distilled water and water wetter. This supplies max cooling.

Steve

dn010
08-24-2016, 09:56 AM
I know this will start a debate but I too use the orange Prestone Dex-Cool.

Morpheus
08-24-2016, 10:02 AM
I use the premixed green Prestone, no complaints.

novadmc
08-24-2016, 10:14 AM
50/50 (green) Prestone.

Nicholas R
08-24-2016, 10:17 AM
Distilled water and water wetter. This supplies max cooling.

Steve

True, but the trade-off is that it also gives you the highest freezing point and lowest boiling point.


I'm a Prestone All Makes All Models and distilled water guy. Use it in every vehicle.

DavidProehl
08-24-2016, 10:29 AM
Prestone and distilled water here, seems to be a popular choice.

EdR5150
08-24-2016, 11:00 AM
I’ve always mixed my own coolant, since it’s more cost effective. Some quick price research showed:
$8.44 – 1 Gallon Prestone Premixed 50/50
vs
$9.24 – 1 Gallon Prestone Concentrated
$0.88 – 1 Gallon Distilled Water

I mix the coolant and distilled water in a clean bucket, and pour any leftover back into the coolant jug, and label it 50/50 with permanent marker.

45675

I prefer the drain and refill method for coolant maintenance. It doesn’t replace all the coolant, but the coolant left in the system isn’t much, and (in my car) less than 3 years old. I think there is too much room for error with the flush with garden hose/fill with concentrate method.

David T
08-24-2016, 05:22 PM
You really should not use distilled water, it is not balanced and can cause minerals (metals) to dissolve. Soft water is what you want. More economical to buy and mix yourself unless you do not have access to soft water. Bottled water is a good substitute if necessary but not cheap. The good old green stuff, aka Prestone, is the best all around choice as it is compatible with all of the materials used in the cooling system. You should never run straight water, it has no anti-corrosion properties, no water pump lubricant, no leak sealing ability, and of course the highest freezing point and the lowest boiling point. All it is good for is flushing and testing. You really should stay away from Dexcool or any of the other "exotic" coolants. If you ever were to accidentally mix and put another, different kind of coolant in you can end up with a disaster. Test annually for strength and PH and drain, flush, and replace it every 5 years. Prestone is available everywhere and is the least expensive coolant you can buy. Spending more money won't get you anything better for your Delorean.

Chris4099
08-24-2016, 07:16 PM
Prestone myself. Sometimes 50/50 and sometimes pre-mixed.

Sorry Fletch, no Quaker State.
45681
I always think of that scene whenever somebody mentions Prestone coolant.

81dmc
08-25-2016, 02:41 PM
I use Prestone 50/50 in the DeLorean and my truck. No issues.

DMCVegas
08-25-2016, 04:03 PM
Prestone myself. Sometimes 50/50 and sometimes pre-mixed.

Sorry Fletch, no Quaker State.
45681
I always think of that scene whenever somebody mentions Prestone coolant.

http://i1165.photobucket.com/albums/q593/DMCVegas/DeLorean_Mechanic.jpg

DMCVegas
08-25-2016, 05:04 PM
You really should not use distilled water, it is not balanced and can cause minerals (metals) to dissolve. Soft water is what you want. More economical to buy and mix yourself unless you do not have access to soft water. Bottled water is a good substitute if necessary but not cheap. The good old green stuff, aka Prestone, is the best all around choice as it is compatible with all of the materials used in the cooling system. You should never run straight water, it has no anti-corrosion properties, no water pump lubricant, no leak sealing ability, and of course the highest freezing point and the lowest boiling point. All it is good for is flushing and testing. You really should stay away from Dexcool or any of the other "exotic" coolants. If you ever were to accidentally mix and put another, different kind of coolant in you can end up with a disaster. Test annually for strength and PH and drain, flush, and replace it every 5 years. Prestone is available everywhere and is the least expensive coolant you can buy. Spending more money won't get you anything better for your Delorean.

I'd probably disagree with just a couple of items. The first being about spending a bit more, or rather specifically spending a bit more overall to just buy the pre-mixed 50/50 antifreeze. THAT is worth spending the extra cash so you never have to worry about the water quality nor dilution ratio. Unless you live in extremely cold climates that dip below -34°F/-37°C in the winter, there's no reason to dilute beyond the 50/50 ratio.

Otherwise, most of this is simply going to be specific for the DeLorean.

Agreed to just stick with the regular antifreeze, unless it's a modern car which requires the extended life stuff. There is however one very special type of antifreeze which you must be aware of: DEX-COOL.

If you've got a GM product that uses the orange liquid abomination known as DEX-COOL, only add DEX-COOL too the engine. But the next time you flush the engine on that car, do yourself a huge favor and get all the DEX-COOL out and switch the engine over to the other Extended Life Coolant. DEX-COOL does NOT play well with other coolants. It also does not tolerate contamination very well. The stuff will eat gaskets, silicone rubber, and plastic manifolds, so get it out.

Personally, I myself would go with the Prestone PRIME antifreeze, but that's just because I operate my vehicles in an extremely hot climate. Otherwise, regular antifreeze will work for almost everyone out there.

dn010
08-25-2016, 05:41 PM
DEX-COOL does NOT play well with other coolants.

I should add that my current engine which is the B280F with EFI, is rebuilt so it was all cleaned up beforehand. I didn't have to worry about contamination but it is a problem as Robert indicates so don't go dumping it in your drained cooling system since there will still be plenty of "green" coolant left in it. My Ford also uses Dex-Cool. So far, no complaints or issues with either vehicles.

Nicholas R
08-25-2016, 06:08 PM
If you've got a GM product that uses the orange liquid abomination known as DEX-COOL, only add DEX-COOL too the engine. But the next time you flush the engine on that car, do yourself a huge favor and get all the DEX-COOL out and switch the engine over to the other Extended Life Coolant. DEX-COOL does NOT play well with other coolants. It also does not tolerate contamination very well. The stuff will eat gaskets, silicone rubber, and plastic manifolds, so get it out.

Personally, I myself would go with the Prestone PRIME antifreeze, but that's just because I operate my vehicles in an extremely hot climate. Otherwise, regular antifreeze will work for almost everyone out there.

I've got the LS1 engine and even I dont use DEX-COOL. I used it the very first time I filled up the car after the swap because I was all jazzed about the new engine, but that was it. After about 6 months I decided it was ridiculous and went back to Prestone (after flushing all of the DEX-COOL out.) Since then, I use the same Prestone in every vehicle I have.

DMCVegas
08-25-2016, 07:35 PM
I should add that my current engine which is the B280F with EFI, is rebuilt so it was all cleaned up beforehand. I didn't have to worry about contamination but it is a problem as Robert indicates so don't go dumping it in your drained cooling system since there will still be plenty of "green" coolant left in it. My Ford also uses Dex-Cool. So far, no complaints or issues with either vehicles.

Ford uses Extended Life Coolant, yes. But it is not DEX-COOL. DEX-COOL is a GM-only antifreeze with it's own proprietary formula containing Potassium 2-ethylhexanoate.

Ford extended life antifreeze is Yellow.

Now while MoPar extended life antifreeze is also Orange like DEX-COOL, it is NOT the same formula. It is more similar to what Ford uses. So nope, you can't go solely by color either.

Potassium 2-ethylhexanoate acts as a plasticizer which attacks certain plastics and silicone rubber. Both of which GM uses in their head gaskets as well as their intake manifolds because of water passages around the throttles. It led to lots and lots of failures. It's why you can still see a decent amount of old Cavaliers, Corvettes, and Silverados from the 90's on the road that had less vulnerable designs, but the vehicles that used the more susceptible to damage V6 engines are disappearing quickly.

If you have a GM vehicle, it's absolutely in your best interest to get the DEX-COOL out. If you have a vehicle that you need to top-off the coolant in, your best bet is just the universal stuff. NEVER EVER EVER use DEX-COOL in any car or truck that doesn't have it already inside! Which if it's not a GM product, you know for a fact you won't use it. GM does claim that DEX-COOL is *technicly* compatible with other coolants, but it's life is then shortened to only two years. But given that it doesn't play well with contamination, and even worse things like silicone rubber where the majority of us here have replaced the Water Pump hoses in the VOD with silicone rubber ones, you don't want to run the risk.

dn010
08-25-2016, 07:59 PM
Manual states WSS-M97B44-D Ford Part Number. Check out the description tab on this link, last bullet:
http://shop.advanceautoparts.com/p/prestone-dex-cool-50-50-prediluted-extended-life-antifreeze-coolant-1-gallon-af850/7020008-P



Ford uses Extended Life Coolant, yes. But it is not DEX-COOL. DEX-COOL is a GM-only antifreeze with it's own proprietary formula containing Potassium 2-ethylhexanoate.

Ford extended life antifreeze is Yellow.

Now while MoPar extended life antifreeze is also Orange like DEX-COOL, it is NOT the same formula. It is more similar to what Ford uses. So nope, you can't go solely by color either.

Potassium 2-ethylhexanoate acts as a plasticizer which attacks certain plastics and silicone rubber. Both of which GM uses in their head gaskets as well as their intake manifolds because of water passages around the throttles. It led to lots and lots of failures. It's why you can still see a decent amount of old Cavaliers, Corvettes, and Silverados from the 90's on the road that had less vulnerable designs, but the vehicles that used the more susceptible to damage V6 engines are disappearing quickly.

If you have a GM vehicle, it's absolutely in your best interest to get the DEX-COOL out. If you have a vehicle that you need to top-off the coolant in, your best bet is just the universal stuff. NEVER EVER EVER use DEX-COOL in any car or truck that doesn't have it already inside! Which if it's not a GM product, you know for a fact you won't use it. GM does claim that DEX-COOL is *technicly* compatible with other coolants, but it's life is then shortened to only two years. But given that it doesn't play well with contamination, and even worse things like silicone rubber where the majority of us here have replaced the Water Pump hoses in the VOD with silicone rubber ones, you don't want to run the risk.

mr_maxime
08-25-2016, 08:33 PM
i used the green stuff from oreillys

AugustneverEnds
08-25-2016, 09:10 PM
Ford uses Extended Life Coolant, yes. But it is not DEX-COOL. DEX-COOL is a GM-only antifreeze with it's own proprietary formula containing Potassium 2-ethylhexanoate.

Ford extended life antifreeze is Yellow.

Now while MoPar extended life antifreeze is also Orange like DEX-COOL, it is NOT the same formula. It is more similar to what Ford uses. So nope, you can't go solely by color either.

Potassium 2-ethylhexanoate acts as a plasticizer which attacks certain plastics and silicone rubber. Both of which GM uses in their head gaskets as well as their intake manifolds because of water passages around the throttles. It led to lots and lots of failures. It's why you can still see a decent amount of old Cavaliers, Corvettes, and Silverados from the 90's on the road that had less vulnerable designs, but the vehicles that used the more susceptible to damage V6 engines are disappearing quickly.

If you have a GM vehicle, it's absolutely in your best interest to get the DEX-COOL out. If you have a vehicle that you need to top-off the coolant in, your best bet is just the universal stuff. NEVER EVER EVER use DEX-COOL in any car or truck that doesn't have it already inside! Which if it's not a GM product, you know for a fact you won't use it. GM does claim that DEX-COOL is *technicly* compatible with other coolants, but it's life is then shortened to only two years. But given that it doesn't play well with contamination, and even worse things like silicone rubber where the majority of us here have replaced the Water Pump hoses in the VOD with silicone rubber ones, you don't want to run the risk.

I can't find where he posted it but Rob Grady gave pretty much the same explanation as to why he doesn't recommend Dex-Cool. If Mr. Grady doesn't like Dex-Cool then it should never find its way into a D.

By the way I use Peak or Prestone pre-mixed whichever I have on the shelf or is readily available at the local Advance Auto.

DMCMW Dave
08-25-2016, 09:49 PM
The only car I've ever run Dex-Cool in is Julee's Chevy Volt. That uses it in both cooling systems (engine AND battery), and given the extremely long warranty involved, I don't want to experiment with it.

DMCVegas
08-26-2016, 12:33 AM
Manual states WSS-M97B44-D Ford Part Number. Check out the description tab on this link, last bullet:
http://shop.advanceautoparts.com/p/prestone-dex-cool-50-50-prediluted-extended-life-antifreeze-coolant-1-gallon-af850/7020008-P

That is an excellent point worth discussion.

In a nutshell, it's Prestone accidentally Spamdexing based upon the product specification chart. That's why it turns up as a compatible coolant when you punch it into a search engine. But in truth, it's not *real* DEX-COOL. Check this out:

DEX-COOL compatible formulas such as this merely claim to meet the Ford WSS-M97B44-D standard for extended life coolants. The first thing is to realize that the "specifications" themselves are not listed. But more on that in a second.

The other thing is that there are different formulas for DEX-COOL. It's an OAT coolant (Organic Acid Technology) which uses Potassium 2-ethylhexanoate. Which remember, that is a plasticizer and what is responsible for all the damage to GM vehicles. However, the Prestone formula as per it's MSDS instead uses SODIUM 2-ethylhexanoate. That if I am not mistaken is a HOAT, or Hybrid Organic Acid Technology coolant. Both Prestone's regular extended life formula, as well as their DEX-COOL formulas eschew Potassium 2-ethylhexanoate in their formulas, which by contrast GM demands and uses on their own assembly line.

Take a look at this chart as well. Even after Ford went from traditional green to HOAT coolant, and the on to OAT coolants, and other manufacturers followed suit as well, everyone is still listed as being compatible with one another except for GM's DEX-COOL which is still quarantined off by itself.

http://www.oreillyauto.com/site/c/antifreeze-selection.oap

They also go out of their way to point out that even when Chrysler also used orange colored coolant, it was totally different than DEX-COOL.

My guess is it seems that the official DEX-COOL standard formula utilized by GM is not at all what you're getting with Prestone. Instead it's only compatible fluids that merely meet OEM specifications. Probably as well to escape the multi-million dollar lawsuits that General Motors had to endure because of their product. If I didn't know any better, I'd say the DEX-COOL stuff Prestone is selling is probably no different than their Extended Life product save for the color dye used. Which is why it would technically be compatible with Ford's WSS-M97B44-D standard. But is is absolutely NOT the same official DEX-COOL you'd buy from a GM dealer. I'd bet that the Ford spec does NOT include Potassium 2-ethylhexanoate, which since Prestone doesn't use, it's why it's listed as being compatible. But we'd need to see the exact specifications to see that.

David T
08-26-2016, 12:52 PM
Because most of us are not chemists and we don't want to guess at it, the very best advice is to NEVER mix fluids. Doesn't matter what they are. There are enough different types that we can't know what can mix and what cannot. The safest bet is the good old green stuff. As for Deloreans that is what is recommended, and that is what works. On other make cars you should always use what the manual recommends and again, NEVER mix different fluids. Not even different manufacturers. You should always know what kinds of fluids are in your car and when they were last changed. If you don't know, then the fluids should be replaced so you DO know when they were changed and exactly what is in there. Especially on a used car, one of the first things that should be done is change all of the fluids and filters.

vwdmc16
08-26-2016, 07:52 PM
Ok guys lets not turn this into a dexcool hate thread, some people like it, most of us hate it. We get it.

I think we got the general vote of what people use.

Bitsyncmaster
08-26-2016, 08:47 PM
Unless you pull your engine block drains, you won't get but half the old coolant out. So you can flush the system with your garden hose. But then you know the capacity and then add half of that capacity with none premixed coolant.

So using none premixed coolant is a quicker change since you don't have to pull your block drains.

This reminds me it is time to do a flush. I used the 5 year coolant which I think was yellow.

DMCMW Dave
08-27-2016, 12:49 AM
Unless you pull your engine block drains, you won't get but half the old coolant out. So you can flush the system with your garden hose. But then you know the capacity and then add half of that capacity with none premixed coolant.

So using none premixed coolant is a quicker change since you don't have to pull your block drains.

This reminds me it is time to do a flush. I used the 5 year coolant which I think was yellow.

Now you've done it. This will start the "distilled vs. tap water" discussion. . . . ;-)

Lwanmtr
08-27-2016, 02:15 AM
Now you've done it. This will start the "distilled vs. tap water" discussion. . . . ;-)

I'll take Cocoa...

FABombjoy
08-27-2016, 09:10 AM
I'll take Cocoa...
And hey, if you break down you can have a cup of hot cocoa while you're waiting!

(Team Filtered Tap Water checking in)

DMCVegas
08-27-2016, 02:49 PM
Ok guys lets not turn this into a dexcool hate thread, some people like it, most of us hate it. We get it.

It's not about simply hating DEX-COOL. The point is that it has an entirely different chemical formula than all other antifreezes. It was designed specfically for ONLY certain General Motors vehicles. This is not an argument over brands, because DEX-COOL is not simply a brand. Prestone? Peak? Those are brands, and each of them, and many others, all make DEX-COOL compatible antifreezes.

As even demonstrated with that chart, not even the manufacturers are actually reccomending that you use DEX-COOL in a non-GM application. They are actively discouraging you from doing that. That in and of itself is not bias not prejudice. It's simply a fact. That isn't even taking into account the known chemistry behind it to where it destroys silicone rubber, which is now very common in DeLoreans.

If you have a GM vehicle that came from the factory equipped with DEX-COOL, then you can use it. If you don't. If it is anything BUT, then you absolutely, positively, should NEVER use DEX-COOL! That's not an opinion at all, it's just a fact.

dhaney
09-06-2016, 03:27 PM
I am about to try and experiment.... as part of the refresh of vin 3254 I am moving to Evans waterless coolant.

http://www.evanscoolant.com

Sent from my SM-N920V using Tapatalk

dhaney
09-06-2016, 03:37 PM
I am the only one with an out of the box coolant idea... I've been in the midst of a refresh of vin 3254 and when I'm done I am going to run this:

http://www.evanscoolant.com

Sent from my SM-N920V using Tapatalk

Lwanmtr
09-06-2016, 04:55 PM
$40 a gallon..pretty pricey for coolant. Hope it works for ya.

DMCMW Dave
09-06-2016, 04:55 PM
I am the only one with an out of the box coolant idea... I've been in the midst of a refresh of vin 3254 and when I'm done I am going to run this:

http://www.evanscoolant.com

Sent from my SM-N920V using Tapatalk

Do your research - there are some issues that you may not want to deal with. Don't recall particulars offhand, but I recall looking into it years ago and stopped.

dhaney
09-06-2016, 05:09 PM
I've looked into all the issues, not terribly conserned, it's good enough for $500k to $1 Million cars... I think my PRV will be fine.

Worst case it runs too hot and I don't like it and I switch. Best case I no longer need to be concerned with block rot!

Sent from my SM-N920V using Tapatalk

DMCVegas
09-06-2016, 06:49 PM
I've looked into all the issues, not terribly conserned, it's good enough for $500k to $1 Million cars... I think my PRV will be fine.

Worst case it runs too hot and I don't like it and I switch. Best case I no longer need to be concerned with block rot!

Sent from my SM-N920V using Tapatalk

Don't know where you've been looking, but after a quick search I found this enough information to convince me NOT to use this stuff.

So apparently it's 100% Glycol, or 100% Ethylene Glycol. And the fun fact about both of those chemicals is that they're flammable. For regular cars in a 50/50 mixture, they're ok thanks to water content. But when it comes to racing applications, that's one of the reasons that they're banned. Hence as well why racers use products such as "Water Wetter" or other alternative coolants. Not because of superior cooling, but because they don't always have much of a choice because of the rules.

The other awesome fact is that this stuff causes far HIGHER cylinder head temperatures because on it's own it doesn't transfer heat as well.

http://www.oilem.com/potential-issues-with-waterless-engine-coolants/

As it also turns out, pure Glycol can also cause corrosion of aluminum. So you'd actually be at a significantly INCREASED risk of block rot from the inside out.
http://jes.ecsdl.org/content/126/1/11.abstract

There are also some other fun facts too that it doesn't like solder very well, and can possibly clog up the radiator and heater cores in many vehicles. This is especially important because Evans doesn't play very well with water, and your entire cooling system MUST be purged so that no more than 3% water content remains. That is going to be VERY difficult. The prep fluid alone is about $30 a bottle, and you're going to need 3 gallons worth, so that's $90 right off the bat. Once you get that flushed out and disposed of, the coolant itself is then around $45 a gallon. So that's then $135 with a running total thus far of $225 to perform this conversion. That doesn't count variations in prices, taxes, potential shipping costs either, nor any potentially applicable disposal fees.

Because you've got to remember: If you don't flush that water out, you're gonna corrode that system. Just as bad is if you get a torn hose. Which I have done when I threw a belt one night. Had to stop at an AutoZone to get a replacement belt, universal hose, and a couple bottles of coolant. Fixed 6585 right there in the parking lot and drove home. You no longer have that option. Unless you can refill the system immediately with that Evans stuff after a quick repair by the side of the road, you're not going anywhere. You can't add any other coolants, and if you do you've got to immediately flush the entire cooling system as soon as possible. And drop another couple hundred bucks.

And notice too that none of this protects your car from overheating. It only stops steam from escaping. Big deal. Engine damage doesn't occur because the coolant purges out of the system. It happens with the extreme temperatures that cause both dissimilar expansion of the Iron and Aluminum components inside of the heads resulting in torn Head Gaskets, as well as permanent, irreparable warpage of the Cylinder Heads themselves.

Look, I love DeLoreans. You love DeLoreans. We all do. We want to do what is best for our cars, absolutely. Spending more money just doesn't equate with taking better care. We only need regular 87 octane fuel, and plain Green antifreeze. There is nothing wrong with these products, it's just what our cars need. The best thing you can ever do for your car isn't fancy antifreeze, "premium" fuels, exotic spark plugs, or anything like that. And no one is going to look down on your for just buying the regular stuff. Sometimes the regular items are exactly what we need because they're the best at what they do.

dhaney
09-06-2016, 07:04 PM
I've researched this for more than a year. The coolant runs hotter because it displaces more heat than normal coolant.

Of course you have to be 97-100%, guess what you flush your system and then test to make sure you've hit the mark.

I'm all about spending money smartly. This is an experiment only. I assure you that I will be monitoring this closely...

Most people who overheat or end up with block rot don't monitor their car well enough. I tell all new owners I meet, best preventative measure is to have a coolant pressure tester, know how to use it and then use it quarterly to check for leaks! Most coolant leaks occur under load, not while car is at rest!

I am convinced most Deloreans are at a point in age/mileage where block rot is going to be a major consern, I hope to find a solution.

Sent from my SM-N920V using Tapatalk

dhaney
09-06-2016, 07:09 PM
I forgot, one other thing... I run silicone hoses, for those not doing so, you are doing yourself a disservice.

Most new cars use them and also use long life coolant. I have a 2006 Xttera... still has factory coolant and factory hoses at 177k. Still runs as cool as ever.

With silicone I should never get a leak. But if I do, yes you can run water in the system... you just need to flush it out and clean the system before recharging with Evans....

Just an fyi... I've been around Deloreans longer than most... Vin 3254 has been in my family since a month before BTTF made the car famous in 1985...

Dan
Vin 3254 & 4770

Sent from my SM-N920V using Tapatalk

DMCVegas
09-06-2016, 08:07 PM
I've researched this for more than a year. The coolant runs hotter because it displaces more heat than normal coolant.

With all due respect, that makes positively no sense whatsoever. In fact, that defies physics.

If this coolant was MORE efficient at heat transference, then that would actually mean decreased temperatures of the coolant returning from the radiator upfront. When that happens, the Thermostat would simply reduce coolant flow out of the engine in order to maintain the proper internal core temperature of the engine in order to ensure proper burning of the fuel for emissions & to avoid long-term damage. Which means that you wouldn't actually see variations in cylinder head temperatures at all. You would see a reduced flow rate as the coolant was forced to remain inside of the engine longer in order to prevent it from over-cooling the engine, but the internal temps would remain the same. That is what the job of the Thermostat is. When they're higher, that actually means that it's functioning far less efficient than regular antifreeze.

Increased cylinder head temperatures means that the coolant is NOT functioning properly because it is failing to expel the heat quickly.



I am convinced most Deloreans are at a point in age/mileage where block rot is going to be a major consern, I hope to find a solution.

"Block Rot" is not caused by simply by what type of coolant used though. To be clear, you must understand that there are two specific types of Block Rot on the PRV that can occur, and they have decidedly different reasons for occurring.

Internal Rot
Internal corrosion of the PRV engine is due to electrolysis caused by battery tenders in storage. When connecting a battery to a tender, instead of connecting the leads directly to the terminals in the battery compartment, and especially disconnecting the battery entirely, some people instead have been found to connect leads to the Positive Post in the engine compartment, and then ground the system to the engine instead. Which introduces a nice electrical charge directly into the engine, and corrodes the aluminum water passages.

External Rot
On the topside of the engine we have the infamous "Valley of Doom" which sits right below the intake manifold. The problem there is that over time you can get silt, dirt, and dead leaves that will fill up the indents between the cast ribs of the block. When leaves and vegetation decompose, they lower the pH value of whatever water, or other muddy slurry they're in. Which again causes corrosion of the aluminum.


But even if we didn't consider all of that, the fact that coolant in and of itself has nothing to do with Block Rot, there still is no real explanation of any benefits to this coolant. Except to the guy selling this stuff.

Silicone Hoses are great. I recommend them too. But the problem here isn't with the hoses. It's with the fact that this stuff can negatively react with the aluminum and can actually cause the very problem that you're trying to avoid. This is pure glycol, and is not at ALL the normal "long life" coolants found elsewhere that other manufacturers use. Those are Hybrid Organic Acid Technology coolants.

I just don't want to see you throw away good money on this.



With silicone I should never get a leak. But if I do, yes you can run water in the system... you just need to flush it out and clean the system before recharging with Evans....


Which then unnecessarily adds about another $250 to $300 to the cost of a repair with no gains to be had.



Just an fyi... I've been around Deloreans longer than most... Vin 3254 has been in my family since a month before BTTF made the car famous in 1985...

And again, with all due respect, that means what?

David T
09-06-2016, 11:56 PM
Actually the coolant plays a role in "block rot" at least the internal kind. If you have old coolant and it becomes to acidic, it will attack the metals it is in direct contact with. You will see examples of that when you get pinholes at the ends of the aluminum pipes, the first sign. I agree battery tenders and other chargers should NEVER be left on continuously for several reasons, electrolysis being one of them. Even if you found a "better" coolant, one that can hold more BTU's per Lb, you would then see other limitations like the capacity of the water pump, the size of the radiator, etc. Unfortunately there is no "Magic in a Bottle", no matter what anyone may claim. That is not to say there aren't other materials that can hold more BTU's and function as a coolant. Liquid sodium is VERY good till you consider it's other characteristics like corrosiveness, explosive contact with air, toxicity and such. Then you will understand why we use what we use and accept it's limitations. Also consider that the metals the motor is made of expand as they get hot. All of the "running clearances" like piston ring gaps, bearings, and such were set so as to be minimized at operating temperature which is 180 degrees F. If the motor was to get hotter they would overexpand and the motor will seize up. Lower temps and the gaps don't close so you get leakage, blow-by, and excessive bearing clearances. According to the Laws of Thermodynamics the hotter the motor can run the more efficient it is BUT the materials are not made to go above a particular temperature before they lose too much of their strength and expand beyond the limits imposed. Another problem to consider is that the motor is made of differing materials and they all expand at different rates. All of this was considered when the motor was designed and made to operate at 180 degrees F. If you want to experiment with different coolants you must understand why we use what we use before you try something else.

dhaney
09-07-2016, 11:54 AM
David T...

I understand all that and just because the Delorean community has embraced this doesn't mean anything...

My statement wasn't directed at you... some comments were directed at me as though this were my first rodeo...


I'm aware of all of the things you state the thing is... even running hotter Evans coolant doesn't run outside of normal operating tempuratures... and it can virtually never boil out!

As stated, it's a test, if I don't like the added heat, I'll go back to regular coolant. I have seen 2 cars with block rot from under the valley... one a well cared for car the other not so much... I think in the next few years we are going to see more of it. That's the end goal in this experiment let's see if we can mitigate corrosion.

Sent from my SM-N920V using Tapatalk

DMCVegas
09-07-2016, 01:55 PM
I'm aware of all of the things you state the thing is... even running hotter Evans coolant doesn't run outside of normal operating tempuratures... and it can virtually never boil out!k

That is completely and utterly incorrect logic. Look, I get it. I understand the misguided marketing behind it it with the claim of, "If it's hotter, it must be because it has absorbed more BTUs, and therefore it's working better!". But that is just not true. If the coolant is running hotter, it is because it does not properly transfer heat as well. That is the key factor in which you absolutely MUST consider. Heat transfer accounts for both the absorption off heat from the sources of it inside of the engine itself, as well as the purging of it within the radiator. If the coolant is running hotter, that means that it is not properly doing it's job, and that also means that the engine is going to encounter heat damage. In order for this stuff to be compatible, you'd have to actually modify your entire cooling system to increase cooling capacity because the physical properties of the coolant have so radically changed.

Water alone is a far superior fluid for cooling. However it functions in a much narrower temperature range as a fluid thanks to it's inherent physical properties.

On the other hand, Glycol has a much wider operating temperature range, but also suffers from 3 major drawbacks:

It does NOT transfer heat as well.
It has a much higher viscosity which causes wear and tear on movable parts.
It is flammable.


The compromise is to combine Glycol and Water in equal 50/50 proportions in order to get the best of both worlds. The problem however is that when the two are combined, they form Glycolic Acid which destroys aluminum parts. So the further compromise here is that you also need to introduce corrosion inhibitors into the coolant solution to prevent the formation of the acid to protect the various metals inside.

As Dave points out, those in inhibitors can wear out. Which is of course why you drain, flush, and refill your coolant system.

Running the engine at higher temperatures is not a good idea. You're risking damage to the engine when the metal over-expands because it is operating at a higher temperature than it is intended for. That leads to head gasket failure. Failed head gaskets can introduce moisture into the system. Without any corrosion inhibitors, glycolic acid forms, and you've now created the very damage that you're trying to avoid. And if the fluid reaches those higher temperatures, it doesn't matter if it's liquid or steam flowing by. The damage is occurring.



Look, I'm not trying to make this a personal fight in the least. I'm trying to help you here. I want you to actually do some real, unbiased research into this. Because this Evans "Waterless Coolant" stuff is garbage. I mean, hell, just look at their website. They claim that this stuff will, "Last the life of the system—no flushing or replacing required". That is a direct quote. That's a very open-ended statement with no actual definition of specifically just how long the lifespan of the "system" is, nor even what definitive "system" it is that they're talking about.

But take a look then at their warranty page.
http://www.evanscoolant.com/how-it-works/conversion-installation/warranty-information/
Never minding that they refuse to promise no damage to your engine and refuse to warranty any part of it directly, they only actually warranty the entire product for a measly 2 years. TWO YEARS! So much for that whole "life of the system" promise...

And this stuff is supposed to be more economical? At current prices of around $40 for a flush and refill for the DeLorean's cooling system, and assuming we perform that maintenance like clockwork every 2 years, that would have cost you about $680 over 34 years. Assuming we did the same with this Evans stuff ever two years so that we could maintain our "warranty" with them, that price would soar to almost $4,000! And the thing is that according to Evans own warranty, you MUST flush their fluids out. Otherwise all of the benefits they claim to offer are not guaranteed. Need proof? It's right their in their warranty:

"Claims that are a result of normal wear and tear, accident, improper installation of any part, manufacturer defect, improper use of Evans Coolant, or failure to properly maintain the cooling system, as outlined herein or by the manufacturer."

That means that if the manufacturer of whatever car you pour this crap into states that you're supposed to replace the coolant, Evans demands that you do the same according to their product guidelines.

Listen, man. I'm not trying to make this personal. I don't want this to be personal. What I want is for you to have a positive experience with your car, and this just isn't going to provide it. You're risking the mechanical integrity of your car. If you don't believe me, do some actual, unbiased research into all of this. Reading an advertisement or listening to a sales pitch is just not research. Just like that anti-boiling over claim. Exactly how is that a good thing? I keep seeing this claim, but no explanation for it.

HollywoodF1
03-30-2019, 11:56 AM
Distilled water and water wetter. This supplies max cooling.

Steve

yes and... RedLine says in their Water Wetter tech info sheet Use Directions (attached) that the a/c can freeze water in your heater core, so a 20% antifreeze mix is recommended. The anticorrosive properties of Water Wetter are outlined on this sheet and are impressive.

DMC says the cooling system holds about 16 quarts total. (attached) This works out to:


1. Pre-mix 3.2 Quarts of 100% "Name Brand" (per DMCH, attached) Green Antifreeze with 1 Gallon of Distilled Water and 1 Bottle of Water Wetter. This makes 2 Gallons of a muddy sort of 50/50 mix. Add to engine.
2. Fill the Balance of about 2 more Gallons of Distilled Water (till expansion tank 1/2-full, of course)

RedLine recommends an additional bottle of Water Wetter every 15,000 for corrosion protection of aluminum, and
DMCH recommends a coolant flush every 2 yrs/15,000 miles. So just flush and repeat to satisfy everyone.

https://www.redlineoil.com/Content/files/tech/WaterWetter%20Tech%20Info.pdf
http://support.delorean.com/kb/a34/cooling-system.aspx

David T
03-30-2019, 12:51 PM
Flushing every 2 years is wasteful. My recommendation is to test every year for PH and strength. Drain, flush and refill every 5 years mainly because the additives package contained within the permanent anti-freeze must be replenished. For cars not subjected to freezing temperatures can get by with slightly less than a 50/50 mix. Make sure you do not use hard water or demineralization can occur and block the radiator.

dn010
04-01-2019, 12:04 PM
This thread is from 2016...

DrWin
01-24-2021, 04:34 PM
This thread is from 2016...

I'm replacing all the coolant hoses and needed to know what "the best" coolant was/is. I found my answers here. :)