Log in

View Full Version : Engine How much cooling-off "ticking" is normal?



DaraSue
09-06-2016, 01:39 PM
So I had some overheat issues on my way home to SLC from Chicago. Got a new thermostat in Rock Springs, but it was a NAPA one that doesn't have the jiggle pin that the DMC thermostats are supposed to. I've got the correct thermostat on order, as well as a replacement for an aftermarket radiator hose that was bent kind of funny. The car made it back the last 200 miles without issue, but I've been driving it to work a couple days a week (about 12 miles each way) and sometimes when I get home at night I notice a lot of that tapping noise you hear from cooling metal sometimes. It's obviously coming from the engine compartment. Is this anything I should worry about and/or refrain from driving til I get the correct parts in?

(This is the radiator hose I'm replacing http://dmctalk.org/attachment.php?attachmentid=46053&d=1472620789 not horribly kinked but maybe enough to have contributed to some of the issues I was having...)

Christian Dietrich
09-06-2016, 01:40 PM
Could be the stainless muffler cooling down and thats the noise. Very common.

Sent from my SM-N920P using Tapatalk

mluder
09-06-2016, 03:29 PM
Yep... They all do that ticking.

Cheers
Steve

DaraSue
09-06-2016, 06:58 PM
Thanks, guys. I've had this car for about two weeks and I guess I'm still in "freak out over every weird noise" mode...

David T
09-06-2016, 07:19 PM
That ticking is from the exhaust system and is normal. One thing you could check is the muffler bracket by the alternator. The original is known to crack.

MML
09-06-2016, 08:38 PM
Thanks, guys. I've had this car for about two weeks and I guess I'm still in "freak out over every weird noise" mode...

Hah, I'm still like that after almost 5 years! That, and weird smells.

MML
09-06-2016, 08:39 PM
That ticking is from the exhaust system and is normal. One thing you could check is the muffler bracket by the alternator. The original is known to crack.

Seconded. I found out the hard way!

DaraSue
09-07-2016, 12:32 AM
I've got a DPI exhaust (which maybe I should have mentioned before, sorry.) I just looked around under there and nothing was glaringly amiss, although is it supposed to be this color?

4617246173

Also it doesn't really show up in this pic but there's a sheet of metal between the muffler and the engine that looked like it was bowed out in the middle, that's not a sign that it's warping from overheat or anything, is it?

Michael
09-07-2016, 01:12 AM
According to the tech manual: (please note counts are taken from a engine running at normal temperature and shut off in 75 degree ambient environment at sea level.)

Factory exhaust manifold and muffler setup: 109-147 ticks in a 45 minute window

DMCH headers with stained exhaust system: 78-102 ticks in a 45 minute window

DPI exhaust with OE manifold: numbers not yet determined at time of publication


Seriously the metal sheet is probably the heat shield. Mine is asbestos OE (I think) but a lot of the aftermarket ones are just a metal sheet. The exhaust looks like it's had something get on it while hot. Probably someone sprayed belt dressing on it while at temp or something simiar.

DaraSue
09-07-2016, 03:10 AM
According to the tech manual: (please note counts are taken from a engine running at normal temperature and shut off in 75 degree ambient environment at sea level.)

Factory exhaust manifold and muffler setup: 109-147 ticks in a 45 minute window

DMCH headers with stained exhaust system: 78-102 ticks in a 45 minute window

DPI exhaust with OE manifold: numbers not yet determined at time of publication


Seriously the metal sheet is probably the heat shield. Mine is asbestos OE (I think) but a lot of the aftermarket ones are just a metal sheet. The exhaust looks like it's had something get on it while hot. Probably someone sprayed belt dressing on it while at temp or something simiar.

For a second I was like "Wait, I don't remember reading that - " :facepalm:

But yeah, there were a couple of antifreeze incidents while I was trying to troubleshoot the overheating issue. The spray pattern seems to span the length of the muffler over to the other side, though. Weird.