Log in

View Full Version : Engine Is starter heat shield necessary with Josh's SPEC 1 Exhaust kit?



1batt4u
11-02-2016, 06:59 PM
Hi all,

I have Hervey's starter heat shield, is it necessary to install if I have Josh's SPEC 1 exhaust kit? Iam currently trying to install the heat shield after I installed exhaust headers, but very tight and cramped?

Necessary? If not taking it off.

DMC5180
11-02-2016, 08:17 PM
Most of the OE heat shields rotted off years ago. It's just a pita piece that doesn't need to be there. If your headers are ceramic coated they also produce less radiant heat.


Sent from my iPhone using Tapatalk

Delorean Industries
11-02-2016, 08:27 PM
Not required. Or we would supply one with out system. :)

1batt4u
11-02-2016, 08:28 PM
Mine are not coated. I guess I'll take it off, cause it is so cramped in there. Wanted it mostly for the wires so they won't be in the way. I have heard people's wires getting burnt.

1batt4u
11-02-2016, 08:29 PM
Not required. Or we would supply one with out system. :)

Ok cool, thank you!

DMC5180
11-02-2016, 08:31 PM
It's up to you to route an secure wires with zip ties in such a position that they can't contact any hot surfaces


Sent from my iPhone using Tapatalk

1batt4u
11-02-2016, 08:51 PM
It's up to you to route an secure wires with zip ties in such a position that they can't contact any hot surfaces


Sent from my iPhone using Tapatalk

Yea that is what I am doing, but hard to get wires from leaning on exhaust header.

Delorean Industries
11-03-2016, 12:06 AM
We route straight back along starter. Most factory cables are very brittle. We commonly replace.

81dmc
11-03-2016, 02:20 PM
We route straight back along starter. Most factory cables are very brittle. We commonly replace.

I routed my Oreilly battery wire straight towards the tranny and into the tub. Also, I opted to eliminate the jump start wire since it would be an extra worry.

I used spark plug heat shields to further protect the wires.
47072


I have to say, ever since I used a fire extinguisher to stop the jump start wire fire, anything that's steel has deteriorated...