Trim for holes in frame

[bdmiko]

Hoping that someone can help me find the right part for my frame. I am looking for the trim that goes around the larger holes in the frame but can't seem to find a part number. Here is a picture of what I am referring to:
47087 47088

McMaster has something that is close and will probably work but I am thinking there may be a better option. McMaster part:
https://www.mcmaster.com/#24175k46/=14vtzsi

Thanks

[sdg3205]

They used that trim in a number of places where friction and contact was an issue. Trailing arm shields, doors, frame.

Call up DMCH and I'm sure they'll know what u mean.

[DMC-81]

I think that's called protective trim or something similar on the DMC webstore. I replaced a piece on my air deflector plate, SP10763. It looked exactly the same as the ones around the hose holes in the frame. I don't know if the one you're looking for has the same part number, but as Dave said, call DMC and use this part number to narrow down what you need.

[dn010]

I used some "windlace" trim that I had lying around from my '67 Mustang. If you do a search it is pretty much the same thing without the cost, only you'll receive more than you'll know what to do with.

[bdmiko]

Thanks everyone for the advice. I may see if I can source some trim locally as I would like to finish this up this weekend. If not I will contact one of the DeLorean vendors.