Log in

View Full Version : Possible fuel system issues



Gavin
06-12-2017, 11:37 PM
So I think I have a fuel system issue. I'm look for some help to diagnose it. I recently had to replace a fuel line due to a small spray.
The symptoms I had today are:

1) The engine lopes at idle. Between 5 - 10 rpms. Seems to want to be at 7.
2) today after driving about 30 miles I had a loss of power. It got worse and the engine would not increase RPMs. Once I had the vehile towed home, it ws fine.

I'm thinking it may be a vacum leak. Any advice would be appreciated.

Thnx

Gavin


Sent from my iPhone using Tapatalk

Jonathan
06-13-2017, 12:21 AM
Is your car an automatic or manual transmission?

Gavin
06-13-2017, 12:29 AM
Is your car an automatic or manual transmission?

Manuel.


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 02:56 AM
Vacuum leaks don't typically come and go. They're either an issue all the time, or none of the time.

I'm not reading enough information to help out quite yet. What fuel line did you replace? Is this a new problem? Any other recent work? Did you try and adjust the mixture? Is the car new to you? ever had a hot start problem? A cold start problem? When the engine dies do you still have spark?

Much more info needed.

Gavin
06-13-2017, 03:05 AM
Vacuum leaks don't typically come and go. They're either an issue all the time, or none of the time.

I'm not reading enough information to help out quite yet. What fuel line did you replace? Is this a new problem? Any other recent work? Did you try and adjust the mixture? Is the car new to you? ever had a hot start problem? A cold start problem? When the engine dies do you still have spark?

Much more info needed.

Hi there,
The fuel supply line was replaced. It had a small spray. It ran fine after that.

The idling and RPM issues are new. Only recent work is replacing the alternator belt. I have not tried to adjust the mixture. Not sure how. The car is new to me, yes. Never had cold or hot start problems. When I had the issue driving the RPMs. Would not increase. After the engine was turned off for about half an hour it would start and increase RPMs, but the idle loped between about 600 to 1000 RPMs.

Thank you for responding

Gavin


Sent from my iPad using Tapatalk

sdg3205
06-13-2017, 03:17 AM
A hunting idle isn't ideal but its not uncommon, and it's a good thing you haven't tried to adjust your fuel mixture without the proper know how. People often make things worse. Changing the send line from the filter to the distributor wont cause a time-based power loss issue.

Start by checking all your vacuum lines are routed properly. Use the diagram under the engine cover.

Have you ever used CIS fuel gauges to check fuel pressures?

You're either loosing fuel or spark after 30 minutes. Next time it happens, use a spark plug light tester to see if you still have spark. Are you running the blue Bosch coil or something else?

Gavin
06-13-2017, 03:03 PM
A hunting idle isn't ideal but its not uncommon, and it's a good thing you haven't tried to adjust your fuel mixture without the proper know how. People often make things worse. Changing the send line from the filter to the distributor wont cause a time-based power loss issue.

Start by checking all your vacuum lines are routed properly. Use the diagram under the engine cover.

Have you ever used CIS fuel gauges to check fuel pressures?

You're either loosing fuel or spark after 30 minutes. Next time it happens, use a spark plug light tester to see if you still have spark. Are you running the blue Bosch coil or something else?

Hi,
No I haven't adjusted the fuel mixture. I'm thinking I'll check the vacum lines and the fuel filter. I have not used a CIS fuel guages.

I think I have spark because after half an hour the engine will turn over and starts, but then has erratic idle Rpms. I am not sure if I have the Bosch coil. The car is very new to me lol.


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 03:12 PM
I think I have spark because after half an hour the engine will turn over and starts, but then has erratic idle Rpms. I am not sure if I have the Bosch coil. The car is very new to me lol.


Sent from my iPhone using Tapatalk

That doesn't mean you have spark when it stalls. We've seen a few aftermarket coils and even Bosch coils go bad; when they reach a certain temperature their spark gets weaker and weaker until it essentially dies. Once the coil cools down, it makes decent spark again. Happened to me.

Gavin
06-13-2017, 03:23 PM
That doesn't mean you have spark when it stalls. We've seen a few aftermarket coils and even Bosch coils go bad; when they reach a certain temperature their spark gets weaker and weaker until it essentially dies. Once the coil cools down, it makes decent spark again. Happened to me.

Ah. I get it now. Would bad spark cause the erratic idle??




Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 03:30 PM
Ah. I get it now. Would bad spark cause the erratic idle??




Sent from my iPhone using Tapatalk

You should post a video. It sounds to me like you're describing the classic hunting idle, where the idle oscillates between say 500 and 1000 rpm. That's essentially the fuel system chasing its own tail. Again, it's not necessarily a bad thing and it can be tweaked.

Gavin
06-13-2017, 03:33 PM
You should post a video. It sounds to me like you're describing the classic hunting idle, where the idle oscillates between say 500 and 1000 rpm. That's essentially the fuel system chasing its own tail. Again, it's not necessarily a bad thing and it can be tweaked.

It is the classic hunting idle, between 500 to 1000 rpm, give or take. I need to trouble shoot it. Just not too framilier with the Delorean yet.


Sent from my iPhone using Tapatalk

Gavin
06-13-2017, 03:38 PM
Any insight as to what causes the classic hunting idle?


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 03:42 PM
It is the classic hunting idle, between 500 to 1000 rpm, give or take. I need to trouble shoot it. Just not too framilier with the Delorean yet.


Sent from my iPhone using Tapatalk

It can be tweaked but you need to do a lot of research into k-jet before you start adjusting the fuel mixture. It's a very sensitive adjustment that requires a special tool or two and it can go the wrong way very easily. You may have a vacuum leak you can't see that is affecting things in which case adjusting the mixture is the wrong course of action. It's very common to see a vacuum leak where the idle speed pipe enters the mixture unit on the LH side. With the air box off on a cold engine, shine a light under the idle speed motor and leave it there while you press down the metering plate. If you see light around where the pipe enters the mixture unit body, you've got a leak. It's a silly design.

It's not the reason your engine is stalling though. Forget about the hunting idle until you've solved the stalling issue. Also, there is a large DeLorean presence in AB, have you joined the AB DeLoeans owners Facebook page? Might be a good idea.

Gavin
06-13-2017, 04:03 PM
Hi,
Thnx for all the advise. Very appreciated.

I have joined the Alberta Deloreans owners club. Lol.

I have no plans to adjust the mix. I plan to check for vacuum leaks, test for spark and inspect the fuel filter.....

My thoughts are that I need to fix the hunting idle, then if it is not the cause of the stalling once the engine is hot..... figure that out.


Sent from my iPhone using Tapatalk

Jonathan
06-13-2017, 04:34 PM
Gavin, you can also double check that the electrical connections on top of the ignition coil and the ones on the ballast resistor are all good and snug.

Pics or video, as Dave suggested, you could post some images of your engine bay and perhaps the fuse and relay area behind the passenger seat and then one of us online might see something causing you trouble while you're getting more familiar with the car.

Gavin
06-13-2017, 07:44 PM
https://uploads.tapatalk-cdn.com/20170613/1aaa2408500492eccf539bf723518a80.jpg


This is my fuse box.


Sent from my iPhone using Tapatalk

Gavin
06-13-2017, 07:45 PM
All fuzes look like they are in working order.



Sent from my iPhone using Tapatalk

Gavin
06-13-2017, 07:46 PM
https://uploads.tapatalk-cdn.com/20170613/8f6d82f9ceb65d328872bc2ef7d28d0e.jpg

I had to tight a hose. No difference.


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 07:46 PM
Yikes, that's not a factory fuse box and i see A LOT of splices and cut wires in there.

Also, where is your RPM (fuel/lamda) relay? Should be up near the back, perhaps tucked under something?

Gavin
06-13-2017, 07:49 PM
Ya.... the previous owner changed it into 2 fuze boxes


Sent from my iPhone using Tapatalk

Gavin
06-13-2017, 07:49 PM
Ya.... the previous owner changed it into 2 fuze boxes


Sent from my iPhone using Tapatalk

I'm still trying to figure out how to post a video on here.


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 07:50 PM
https://uploads.tapatalk-cdn.com/20170613/8f6d82f9ceb65d328872bc2ef7d28d0e.jpg

I had to tight a hose. No difference.


Sent from my iPhone using Tapatalk

You are not running stock ignition. I can see the ground straps for the plug wires.

sdg3205
06-13-2017, 07:55 PM
Also, the grey connector on the cold start valve - does that mean the BLUE connector is on the control pressure regulator?

sdg3205
06-13-2017, 07:58 PM
The cold start valve is with bigger circle. the plug on it is GREY but it should be blue. The smaller circle is the plug for the control pressure regulator. IF IT IS BLUE then those connectors MUST BE swapped!

52045

This may indicate you have a hot starting issue. Typically those plugs are swapped FOR A MOMENT during start up to get the CSV to fire. Upon starting they are immediately swapped back. Leaving the grey plug on the CSV will cause all kinds of fuel issues.

Gavin
06-13-2017, 09:25 PM
Hmmm.... I'll swap them over and see what happens. Thnx


Sent from my iPhone using Tapatalk

sdg3205
06-13-2017, 09:55 PM
Yeah that's kind of a big deal.

Gavin
06-14-2017, 12:04 AM
The cold start valve is with bigger circle. the plug on it is GREY but it should be blue. The smaller circle is the plug for the control pressure regulator. IF IT IS BLUE then those connectors MUST BE swapped!

52045

This may indicate you have a hot starting issue. Typically those plugs are swapped FOR A MOMENT during start up to get the CSV to fire. Upon starting they are immediately swapped back. Leaving the grey plug on the CSV will cause all kinds of fuel issues.

I swapped them over. The engine was hard to start and very rough Idle then, worse then before. The plug on the CSV is light blue... but faded.

The plug on the CPR is darker blue.


Sent from my iPhone using Tapatalk

sdg3205
06-14-2017, 12:12 AM
This is what you should have all terminating into the engine harness:

Black - idle speed motor
Blue - cold start valve
Grey - control pressure regulator

Double check someone hasn't splices in a "light blue" plug. Those should all be properly heat shrinked right to the main harness.

https://uploads.tapatalk-cdn.com/20170614/584b7e8b55f342dfe2dd78cb0f592ba4.jpg

Gavin
06-14-2017, 12:41 AM
This is what you should have all terminating into the engine harness:

Black - idle speed motor
Blue - cold start valve
Grey - control pressure regulator

Double check someone hasn't splices in a "light blue" plug. Those should all be properly heat shrinked right to the main harness.

https://uploads.tapatalk-cdn.com/20170614/584b7e8b55f342dfe2dd78cb0f592ba4.jpg

https://uploads.tapatalk-cdn.com/20170614/88552a3dbf4ac2e556ac90afbe48a54f.jpghttps://uploads.tapatalk-cdn.com/20170614/608761e4a3a77b2f586b52aad2277914.jpghttps://uploads.tapatalk-cdn.com/20170614/178eccb1619b1929477369ae3c3324b0.jpghttps://uploads.tapatalk-cdn.com/20170614/c3d32e5a39e455429208af6a5981a18b.jpghttps://uploads.tapatalk-cdn.com/20170614/e8ee6efff6e68391b977f8d1a0b895d5.jpg



Sent from my iPhone using Tapatalk

Gavin
06-14-2017, 12:44 AM
There is also a hose coming of off the control pressure regulator, secured with a red hose clamp. The hose Is not conected to anything though


Sent from my iPhone using Tapatalk

sdg3205
06-14-2017, 12:49 AM
I can see the wiring on that odd duck grey/blue-ish harness and that seems correct. So yeah it looks like someone has done some work on those before.

sdg3205
06-14-2017, 12:51 AM
There is also a hose coming of off the control pressure regulator, secured with a red hose clamp. The hose Is not conected to anything though


Sent from my iPhone using Tapatalk

That's a breather hose. That's fine

Gavin
06-14-2017, 01:41 AM
https://www.youtube.com/watch?v=GDJxNmy_U3w&feature=youtu.be

Gavin
06-14-2017, 01:47 AM
https://youtu.be/GDJxNmy_U3w

https://youtu.be/GDJxNmy_U3w

sdg3205
06-14-2017, 01:50 AM
That's not a bad idle at all.

Gavin
06-14-2017, 01:53 AM
https://www.youtube.com/watch?v=GDJxNmy_U3w&feature=youtu.be

Gavin
06-14-2017, 01:55 AM
https://www.youtube.com/watch?v=wypuvJ01Wpc

https://www.youtube.com/watch?v=wypuvJ01Wpc

Gavin
06-19-2017, 06:32 PM
Ok.. so if the idle is fine, what might cause my engine to fail to rev when driving. After about half an hour everything seemed fine. Worried this will happen again if I drive it.


Sent from my iPhone using Tapatalk

NckT
06-20-2017, 02:16 PM
https://www.youtube.com/watch?v=wypuvJ01Wpc

https://www.youtube.com/watch?v=wypuvJ01Wpc

That idle is awful. I'd highly recommend that you start investigating fuel pressures and the lambda/ fuel computer operation, as that oscillation is systematic of a "too lean" fuel condition. .

Gavin
06-20-2017, 04:03 PM
That idle is awful. I'd highly recommend that you start investigating fuel pressures and the lambda/ fuel computer operation, as that oscillation is systematic of a "too lean" fuel condition. .

It smells like it is running to lean.



Sent from my iPhone using Tapatalk