Stock parts for sale after engine/tranny swap

[Henrik]

A final mop-up after my engine swap + conversion to manual transmission. (Read all about it here (http://deloreanvr6conversion.blogspot.com/): http://deloreanvr6conversion.blogspot.com/)

******************

1:
Idle Speed ECU #106896. DMCH Price: $343. Asking: $170
ECU, Lambda (black) #110067. DMCH Price: $125. Asking: $62
ECU, Lambda (silver) #101068. DMCH Price: $156. Asking: $78
Mounting tray #106825. DMC Price: (OUT OF STOCK). Asking: $75
55426
55427

******************

LEFT TO RIGHT IN PICTURE:
2A:
Shifter lever #110095. DMCH price: $98. Asking $49
I am including:
..Baulk Lever #101399 (A small piece of the plastic had broken off and was glued back on. Still functional.) DMCH price: OUT OF STOCK.
..Lower Case #101918. DMCH price: $6.23
..Upper Case #100557, DMCH price: OUT OF STOCK
..Knob Mounting Bracket #101397. DMCH price: $3.69
..Spring #101919. DMCH price: $0.94.
*Sold as a complete set only*
2B:
Rod #105431. DMC price: $42. Asking $21
Housing #105427. DMCH price: $47. Asking $23
*Sold as a complete set only*
2C:
Front gear change tube #101864. DMCH price: $32. Asking $16
Pivot gear shift #100824 and Pivot Bolt #100277. DMCH price $30. Asking $15
Support bracket #101923 and Clamp G/Shift cable #101924. DMCH price (OUT OF STOCK), Asking: $10
*Sold as a complete set only*
55428

******************

3:
Quadrant Top Plate – Stainless #111689. DMCH price: $64. Asking $32
Slide Auto Quadrant #110083. DMC price: $10. Asking $5
Decal #110196. DMCH price: $10. Asking: -
Quadrant lower plate #110082 (A small piece of the plastic had broken off and was glued back on. Still functional.) DMCH price: (OUT OF STOCK). Asking $25.
*Sold as a complete set only*
55429
55430

******************

4:
Ignition Coil with bracket #101052. DMCH price: $47. Asking $23
55431

******************

5:
Gearbox (auto) rubber support bracket #100902. DMCH price: (OUT OF STOCK). Asking: $50 for both
Rubber gear box (auto) mount) #100901. DMCH price: $61/ea. Asking $60 for both
*Sold as a complete set only*
55432

******************

6:
De-ice recall kit #K109268. DMCH price: $25. Asking $15
55433

******************

7:
Carbon canister #101109. DMCH price: $65. Asking $10
Carbon canister bracket #101111. DMCH price: (OUT OF STOCK). Asking $10
Bezel # 105710. DMCH price: (OUT OF STOCK). Asking $10
Hoses #105933, 10592, 105932, 105930 DMC price: approx. $40. Asking $20
*Sold as a complete set only*
55434

******************

8:
AC Compressor Mount brackets #100718. DMC price: $47 x 2. Asking $47 for both.
*Sold as a complete set only*
55435

******************

9:
Header Bottle (steel) #101944A. DMCH price: $139. Asking $50
55436
55437

******************

10:
Radiator #100486. DMCH price: #385. Asking $100
55438
55439

******************

11:
Exhaust manifolds #102257/102258 incl. gaskets and stove pipe. DMCH price: $878. Asking $250 for all of it!
*Sold as a complete set only*
55440
55441
55442
55443

******************

12:
Torque converter # 103753. DMCH price: $426.56. Asking $213
M10 bolts (qty 3) #SP10223 for attaching flexplate to torque converter. DMCH price: $16.53. Asking $8
*Sold as a complete set only*
55444

******************

13.
Flexplate #102065. DMCH price: $396.44. Bought it new in 2011. Asking $198.00 including seven mounting bolts.
Reinforcement plates (qty 2) #102068 for flexplate. DMCH price: $24.88 for both. Asking $12
*Sold as a complete set only*
55445
55446

******************

14.
Lambda probe #101069. DMCH price: $23 and Lambda sensor #102478. DMCH price: (OUT OF STOCK). Asking $20 for both.
55447

=========================================

Buyer pays for shipping. Paypal preferred.

PM me if you're interested.

Thanks,

Henrik

[Jonathan]

I sent you a PM about a couple of the parts.

[Chris 16409]

How much use did the ignition coil? By the looks of the label it looks newer? Thanks.

[Henrik]

I sent you a PM about a couple of the parts.

Jonathan:

Thanks for your PM.

#3: I just realized that you can't attach pictures in PMs so here are two close-ups of the glued tab that you asked about. I used it like that for years and it held up just fine.
5545155452

#5: The rubber portion of the mounts are used but they cleaned up really well - yes, as good as new. The metal portion of the bracket is painted in a "fake" anodize color that is flaking a little bit but, you're right, they are in good condition with no corrosion.

Correct: $172 total for #3 and #5.

I'll check on shipping on Saturday and PM you then.

Henrik

[Henrik]

How much use did the ignition coil? By the looks of the label it looks newer? Thanks.

Yes, the coil is certainly not new but is in good condition and works perfectly fine. I bought the Stage 1 kit in 2006 and if that kit includes a coil (do not recall; can't find a reference to it on DMCH's website) then that is probably how old it is.

[Jonathan]

Just a quick follow-up to say my parts arrived and everything looks good. Just as described and shown in the photos. Thanks Henrik :)

[Henrik]

Just a quick follow-up to say my parts arrived and everything looks good. Just as described and shown in the photos. Thanks Henrik :)

Thanks Jonathan!

UPDATE: #2, #3 and #5 are SOLD!

[eight8toy]

Coolant tank still available? Does it use the stock mounting points? I still have the plastic bottle.

[Henrik]

UPDATE: #2, #3, #5 and #9 are SOLD!

[Henrik]

UPDATE: The following is SOLD:
#1 (ECU, Lambda (silver) #101068 )
#2
#3
#5
#9


but the other stuff is still available...:)

[Henrik]

BUMP! (It's my right, dammit!)

[Henrik]

Ed Uding - I sent you a PM...

[Henrik]

UPDATE: The following is SOLD:
#1 (ECU, Lambda (silver) #101068 )
#2
#3
#5
#9
#10


but the other stuff is still available...:)