PDA

View Full Version : door seal driving me nuts!



Parzival
02-05-2019, 01:47 AM
I replaced the inner door seal on my passenger side door 3 weeks ago, and its been a real pain! I have it fully seated, I've tried soaking it in silicone as suggested by DMC, I've hit it with a rubber mallet all the way around. I cleaned it and used gummi pflege left the door closed for weeks. It still has to be slammed really hard to close. So hard my wife cant close the door, and even some of my male friends can't on the first or second try. I'm afraid at this point that I'm gonna break something if I let things go on like this. I went ahead and ordered another inner door seal, this time from delorean go (hope its different then the DMC Huston one I got) I've heard there was a new style one that Huston was selling that had their DMC logo moulded into it every few inches, but I didn't get that one in my order, and when I asked them about it they told me there was no such thing.... I swear I saw a photo of it somewhere. Ethere way, I don't care about the logo, I just want to be able to close my freaking door!
What should I do? Does anyone know if the deloreanGO inner door seal is different then DMC Huston's? My door closed fine with the old door seal. and closes fine if I remove the inner door seal.
Thanks in advance for any insight as to what is going on.

DeLoreanGo Arran
02-05-2019, 06:21 AM
Yes, they are completely different seals. As you have mentioned, really make sure they are seated fully, rubber mallet all the way around. You might need to adjust the position of the striker pins from what you describe, and/or you might have other alignment issues going on with the doors. Read this thread fully (it's only 3 pages :) ) and it should help you out: http://dmctalk.org/showthread.php?15246-Door-seal-installation-help

David T
02-05-2019, 11:25 AM
Different vendors sell different seals and they are not all the same height. As mentioned you may need to adjust the anchor pins. When the door is closed is the surface of the door level with the adjacent panels? If it is significantly below or above the pins should be adjusted.

Parzival
02-05-2019, 12:05 PM
Different vendors sell different seals and they are not all the same height. As mentioned you may need to adjust the anchor pins. When the door is closed is the surface of the door level with the adjacent panels? If it is significantly below or above the pins should be adjusted.

When the door is closed the lines of the car look good. Adjusting the pins is defiantly something that might need to happen, but I've never done it before, and the door was fine with the old seals. Now that I know the delorean go seals have less of a bulb on them, I'm gonna wait until those get here and see if that solves it. If it does not then I'm gonna have to get creative.

Jonathan
02-05-2019, 12:07 PM
When you take that seal off, but before you put the new DeLoGO seal on, you can try to open and close the door with no seal installed to see if there are any other interference problems.

dn010
02-05-2019, 01:51 PM
I've heard there was a new style one that Huston was selling that had their DMC logo moulded into it every few inches, but I didn't get that one in my order, and when I asked them about it they told me there was no such thing.... I swear I saw a photo of it somewhere.

Seems like whoever you talked to has no idea what is going on. Dana (DMC-81) has a photo of the seal with the DMC logo on it in his interior restoration album. I couldn't find it used in a thread to post a link to it and didn't want to pull his picture and use it as if it was my own.

Parzival
02-05-2019, 07:20 PM
When you take that seal off, but before you put the new DeLoGO seal on, you can try to open and close the door with no seal installed to see if there are any other interference problems.

Closes perfect with no seal installed.

Parzival
02-05-2019, 07:31 PM
Seems like whoever you talked to has no idea what is going on. Dana (DMC-81) has a photo of the seal with the DMC logo on it in his interior restoration album. I couldn't find it used in a thread to post a link to it and didn't want to pull his picture and use it as if it was my own.

Yeah Dana has the new style seal, I've seen it. But DMC Houston has pretty much said the seal they sent me is the only seal they offer, I even had the person on the phone go ask around the shop. I even emailed them photos of the difference and they have still maintained that I received the only seal they offer. That being said, I assume that their seal is a good product, but all of our cars are different. I would imagine that some cars have less lip around the body tub then others. DMC Houston's seals likely work on cars with less lip and keep the door from leaking, and everything is 100% functional. Other cars might have more lip around the tub, and those cars may benefit from the Delorean go style seals. I guess I'm gonna find out. The guys at DMC Florida tell me that some cars get new seals and its all easy going, and others are a fight to get them to function correctly when new seals are installed, and that they have to trouble shoot in those cases.
Frankly I dont care who makes the best seal, or who's are more original. I just want my wife to be able to close the door, and not to damage the car on account of how hard I have to slam it to get it to close.

bueller
02-05-2019, 08:57 PM
I recently installed the DeLoreanGO ones and am very happy with the look and fit. When I bought the car, I knew it needed new seals so had bought the Houston ones. I kept putting off installing them but then heard about the newer style and decided to give it a shot. They are definitely thinner than the set I got from Houston and they look sharp on the car. You won't be unhappy.

I will tell you that I had to hit way harder than I thought I would with the rubber mallet. I thought I had the set on correctly at one point and then tried to close the door. Had the same issues with closing as you mentioned. After trying a few things with no luck, I tried hammering the hell out of it (carefully of course so as not to break anything...) and found it wasn't actually fully seated -- had maybe another 1/16 or 1/8th of an inch to go. When I got it fully seated, everything worked like a champ with closing. Not saying you're in the same boat but maybe something to check again. The thinner ones from DeLoreanGo will definitely help too.

David T
02-05-2019, 09:44 PM
If you call other vendors they can get you seals of different sizes. I know PJ Grady had several sizes. On the earlier cars it can be difficult to get the right seal. Never adjust the door to fit the seal or to close tighter to compensate for an old, tired seal.

Bullitt
02-06-2019, 02:46 AM
The New DMC Houston seals were the ones that worked for me. I am pretty satisfied about DeloreanGo and their products, but their door seal was shit... (For my car at least)
First of all I could see sun shining through at the drivers side A pillar, And the seal was so sticky it got stuck to itself and got torn apart while closing the door. But I guess soaking it with silicone spray while installing would have fixed that issue.
Luckily they were cheap... I know other people are satisfied with them. But every car is different.

dn010
02-06-2019, 10:42 AM
I agree, I think the vendor offered seals are good for certain cars, not so good for others. That said, I still have issues with my doors. Same as you - close great and easy when there are no seals installed. Put a seal on and I can barely close the driver door, have to SLAM both doors in order for it to latch. Silicone spray helped a little but I'm in the same position as you with wanting to have something to make life easier while also keeping the water out. I'm using DPI seals which I think are good - they don't leak one drop! But they're not good for my car. I need something lower profile. Unfortunately my doors tore up the DPI seals so I'm back to unsightly ripped seals. Let me know how those D-go seals work for you, I will need a replacement whenever I feel motivated enough to change them.



Yeah Dana has the new style seal, I've seen it. But DMC Houston has pretty much said the seal they sent me is the only seal they offer, I even had the person on the phone go ask around the shop. I even emailed them photos of the difference and they have still maintained that I received the only seal they offer. That being said, I assume that their seal is a good product, but all of our cars are different. I would imagine that some cars have less lip around the body tub then others. DMC Houston's seals likely work on cars with less lip and keep the door from leaking, and everything is 100% functional. Other cars might have more lip around the tub, and those cars may benefit from the Delorean go style seals. I guess I'm gonna find out. The guys at DMC Florida tell me that some cars get new seals and its all easy going, and others are a fight to get them to function correctly when new seals are installed, and that they have to trouble shoot in those cases.
Frankly I dont care who makes the best seal, or who's are more original. I just want my wife to be able to close the door, and not to damage the car on account of how hard I have to slam it to get it to close.

Parzival
02-06-2019, 11:52 AM
The New DMC Houston seals were the ones that worked for me. I am pretty satisfied about DeloreanGo and their products, but their door seal was shit... (For my car at least)
First of all I could see sun shining through at the drivers side A pillar, And the seal was so sticky it got stuck to itself and got torn apart while closing the door. But I guess soaking it with silicone spray while installing would have fixed that issue.
Luckily they were cheap... I know other people are satisfied with them. But every car is different.

Yeah, sadly DMC will not give me the new seals. I don't know why, but they just wont.
However weird it is, I can't fault them too much as I've bought a ton of parts from them and everything has been perfect, just this one 40 dollar seal. The seal it self is perfectly brand new, and seems like a good quality. My car just does not like it, and I'd like to try the new style seal, Dana had the old style as well and could never get it to close right and he even broke his door handle during all the trouble shooting, he installed the new style and problem solved immediately. Why I seem to not get the privilege of the new style is a mystery, but hey, whacha gonna do?
Hope the delorean go seal is a good fit for my car is all I can do. I am taking my car in to DMCFL for a complete exhaust overhaul in 2 weeks, I'll have them look at the seals for me and hopefully see what's going on. Robert is always a big help, and always has a positive attitude every time I need something. So I'm sure he will have a few ideas on how I can get the door closing. I didn't buy the seals from him, I ordered them from Huston as part of a larger order, and I haven't had the chance to take the car over to their shop yet.

Jack
02-06-2019, 04:56 PM
Just do what I did.
Redesign the seals.
Put rolled foam seals on the door itself.
Then cut of the pron to fail tube and leave the retainer (or) remove it all and replace with some black edge trim retainer for a nicer look.
This mod will NEVER bind.
Go headed remove one seal tonight as a test.
Enjoy how easy it is to close and open without stock seals.
Once I'm home I'll re-post pics, I can not seem to find them right now.
If you test the door without the original seals once you'll never go back.
I guarantee it.
59186

Jack
02-06-2019, 09:30 PM
59192

dn010
02-06-2019, 09:33 PM
This is interesting. The foam doesn’t soak up water? How is it in a rain storm? In Florida we get some nasty rain...

Parzival
02-06-2019, 10:06 PM
Just do what I did.
Redesign the seals.
Put rolled foam seals on the door itself.
Then cut of the pron to fail tube and leave the retainer (or) remove it all and replace with some black edge trim retainer for a nicer look.
This mod will NEVER bind.
Go headed remove one seal tonight as a test.
Enjoy how easy it is to close and open without stock seals.
Once I'm home I'll re-post pics, I can not seem to find them right now.
If you test the door without the original seals once you'll never go back.
I guarantee it.
59186

Yeah, I believe I've seen a youtube video in which this was done, Im guessing that was you?
If I don't have this figured out soon I'll be looking for creative solutions to this problem.

Jack
02-06-2019, 10:13 PM
This is interesting. The foam doesn’t soak up water? How is it in a rain storm? In Florida we get some nasty rain...
I have not had that happen.
I believe this stuff is closed cell rubber.
59193
It just your standard roll weather stripping. I forget the size I'd have to measure it.
Water should never get that high unless you have a blockage.
The fiber glass forms a "gutter", that's why when you open the door in the rain it doesn't come pouring in off the roof.

Jack
02-06-2019, 10:15 PM
Yeah, I believe I've seen a youtube video in which this was done, Im guessing that was you?
If I don't have this figured out soon I'll be looking for creative solutions to this problem.

Send the link if you can. It wasn't me, but I'd like to see what they did.

Parzival
02-06-2019, 10:25 PM
This is interesting. The foam doesnÂ’t soak up water? How is it in a rain storm? In Florida we get some nasty rain...

good point!
but I believe its the same bulb portion of seal taken from a normal seal, just separated from the groove portion. So I don't know if it will soak up water any differently then a stock seal. At least thats what I think he did.

After sitting in a parking lot for 10 minutes watching my wife struggle to close the door, I'm ready to try anything. I've done way more intense work on this car, The steering column bushing was a big pain. The valley of death job, yeah that was a lot of work, even with a seasoned vet like Dana graciously working through it with me. But I swear, nothing has frustrated me more than this damn seal. Its not that big a deal but its just the right kind of a problem to really freaking get me pissed! lol
Just for the recored I didn't sit there watching my wife struggle with the door without helping her, We were examining the problem and she really wanted to get it shut herself. She did eventually get it, but it was so hard that I've been closing her in just to make things easier. Altho I have to slam so hard people in parking lots probably think I'm mad at her and slamming her in!
I guess at least It might make me seem like a real gentlemen opening and closing doors for my wife. I digress...

Parzival
02-06-2019, 10:27 PM
Send the link if you can. It wasn't me, but I'd like to see what they did.

Check it out
https://www.youtube.com/watch?v=YJM5v66Wpew&t=708s

Jack
02-06-2019, 10:28 PM
Found it.
Yep not me.

https://www.youtube.com/watch?v=YJM5v66Wpew

Parzival
02-06-2019, 10:31 PM
Found it.
Yep not me.

https://www.youtube.com/watch?v=YJM5v66Wpew
Is that basically what you did?

Jack
02-06-2019, 10:39 PM
Is that basically what you did?
Very close.
I used the weather stripping all the way around.
Any areas that had a larger gap filled I put two layers. Instead of using a bulb like he did.
The top layer was one continuous strip. So the double areas wouldn't have sharp stops to them.
For the retainer I just reused the ones I had on the car by removing the bulbs.
The ones I had were not the solid extruded ones so removing the bulb was easy.

dn010
02-07-2019, 11:01 AM
The fiber glass forms a "gutter", that's why when you open the door in the rain it doesn't come pouring in off the roof.

Yes, I know how it works, LOL. My problem was never the roof leaking down (except that time my headliner material was too long and soaked water), my problem was water leaking between the seal and door on its way down the sides of the door. It would drip down onto the carpet and I always had a mess. This was back in the early 2000s when I doubt I even had good outer seals to take care of a lot of the water so who knows what would have happened with new seals installed back then. I just want A - my doors to close properly with ease and B - a seal that doesn't leak during those times I'm inevitably going to have the car out in the rain.

jangell
02-11-2019, 12:14 AM
I've also had a lot of trouble with my seals. I have some old DMC Houston ones that are torn and are grabbed by the doors when I open them, but they keep the water out.

I got some DeLorean Go ones and tried to install them today, but unfortunately they don't work for me. I have an early '81, and after putting the seals on, the doors basically wouldn't close without a lot of force. They close just fine with no seals on them, but with the Go seals I really have to slam them, and they popped off completely near the A pillar.

I put old seals back on for now. Maybe in the spring when it's warmer I'll give the Go seals another try. I would quite like to have properly working seals and to actually use my door launchers again.

-- Joe

Parzival
02-11-2019, 12:36 AM
I've also had a lot of trouble with my seals. I have some old DMC Houston ones that are torn and are grabbed by the doors when I open them, but they keep the water out.

I got some DeLorean Go ones and tried to install them today, but unfortunately they don't work for me. I have an early '81, and after putting the seals on, the doors basically wouldn't close without a lot of force. They close just fine with no seals on them, but with the Go seals I really have to slam them, and they popped off completely near the A pillar.

I put old seals back on for now. Maybe in the spring when it's warmer I'll give the Go seals another try. I would quite like to have properly working seals and to actually use my door launchers again.

-- Joe

I haven't received my delorean go seals yet, so I can't report back yet. What a pain eh?