PDA

View Full Version : Engine oring for oil filler


painterdave72
06-09-2019, 09:27 PM
does anyone know where to get one from? its not listed on any websites as a separate item....
AirmanPika
06-09-2019, 10:33 PM
Isn't this usually built into the filter? All of mine have been...
DMC-81
06-10-2019, 05:16 AM
If you have the old one to use as a reference, I can usually find common sizes at my Ace Hardware store, etc., but if not, and you need an odd specification, McMaster-Carr has an excellent assortment:

https://www.mcmaster.com/o-rings

That's what I did when I refreshed mine.
painterdave72
06-10-2019, 05:27 PM
thanks.. do you remember which one u ordered from McMaster by chance??
Chris 16409
06-10-2019, 05:29 PM
What kind of oil filters are you using? This is a strange request. The filter itself has one integrated and no additional one is required.
Jonathan
06-10-2019, 05:33 PM
https://www.deloreango.com/ca/oil-filler-assembly-o-ring.html

It doesn't show-up on Houston's page. I don't know why. It has a part number that seems legit as it's one number right after the oil filler itself. I bought one of these for my own car and it fit fine.
DMC-81
06-10-2019, 07:03 PM
https://www.deloreango.com/ca/oil-filler-assembly-o-ring.html

It doesn't show-up on Houston's page. I don't know why. It has a part number that seems legit as it's one number right after the oil filler itself. I bought one of these for my own car and it fit fine.

Ah, even better.


thanks.. do you remember which one u ordered from McMaster by chance??

It looks like I found one at my local Ace. It's an old school hardware store that opened in 1945, so they have lots of selection.

If you choose this route, just match OD and thickness, and select an oil resistant material (Buna-N or Viton ). Make sure the new one allows the oil filler to fit snugly in place without binding.
bytes311
06-11-2019, 03:32 PM
What kind of oil filters are you using? This is a strange request. The filter itself has one integrated and no additional one is required.

I think OP is referring to the o-ring on the black filler cap, not the oil filter.
JETS 81 DMC
06-11-2019, 03:45 PM
I think OP is referring to the o-ring on the black filler cap, not the oil filter.


Yup, bytes311 you are correct. I misread it also. Good catch. :thumbup2:

painterdave's post title: oring for oil filler