PDA

View Full Version : Transmission 5-Speed Jolt on acceleration



Jonty
08-10-2019, 12:42 AM
Hi all

Today I noticed if I really put my foot down from the lights I got quite a noticeable jolt in the first few secs almost like the wheels slipped or a gear slipped. I could replicate so just wondering if the clutch is going or if it might be jumping a cog in the gear box or something? It’s needs a fair bit of torque to do it (like foot down of light or up hill).

Anyone had this before?

Ron
08-10-2019, 03:37 PM
Have you checked your engine & trans mounts?

vwdmc16
08-10-2019, 07:28 PM
Most likely transmission mounts or engine mounts letting go. Best to confirm with the vehicle on a lift and using a large prybar to move the engine and see if it lifts up.

DMCMW Dave
08-10-2019, 10:01 PM
At a relatively slow speed (15-20 mph) shift it to 3th gear, rev engine a bit, and let the clutch pedal out fast. If it slipping this is when you'll feel it. Based on your description I agree with the others that it could be a mount, but that's a pretty rare failure compared to a slippy clutch.

Jonty
08-10-2019, 11:40 PM
Thanks all - had a look underneath and all mounts look good (and look like they have been replaced in the last few years). I’m familiar with a slippery clutch so that’s why I had doubts on that. It feels almost like traction control kicking in for a split second just after launch. Lug nuts are all tight and cant see anything else loose

Ron
08-11-2019, 12:01 AM
FWIW, those mounts can break (separate) and look pristine.

Jonty
08-11-2019, 12:25 AM
FWIW, those mounts can break (separate) and look pristine.

Thanks Ron. I’ll ask my local to have a look as they have a better hoist. Also, it was raining so could a long shot be the rear wheels were losing grip slightly? Does a small amount of wheel slip happen in first in the D with a lot of acceleration and a wet road?

Ron
08-11-2019, 01:31 AM
If you are lucky. :deviltail:

Jonty
08-11-2019, 01:55 AM
Ha ha - all the power!

DMC-Ron
08-11-2019, 04:12 AM
As a precaution, check your trailing arm bolts.

-Ron