PDA

View Full Version : RPM Relay Location



LordFly
10-06-2016, 04:17 PM
Anyone happen to have a labeled picture showing exactly which relay the RPM on is?

Ron
10-06-2016, 10:37 PM
Anyone happen to have a labeled picture showing exactly which relay the RPM on is?
Not a pic but this should do the trick:
46513

Michael
10-06-2016, 11:16 PM
I got Dave's solid state relay and never looked back..just the same I kept my old relay just as a spare but I doubt I will ever need it.

DMC-81
10-08-2016, 06:21 AM
Anyone happen to have a labeled picture showing exactly which relay the RPM on is?

Here's a pic if it helps any. The RPM relay is tucked in on the bottom layer so it's sometimes hard to distinguish.

46540


I got Dave's solid state relay and never looked back..just the same I kept my old relay just as a spare but I doubt I will ever need it.

+1. I'm running Dave's solid state unit (highly recommend), and I have the relay that I got in DMC's relay and fuse update kit as a spare.

cpistocco
10-10-2019, 08:44 PM
Here is a Fun-filled-fact concerning rpm Relay (and any other relay, for that matter).- Relay should ALWAYS be in the upright position (wires down) to work properly.

CFI
10-10-2019, 08:50 PM
Here is a Fun-filled-fact concerning rpm Relay (and any other relay, for that matter).- Relay should ALWAYS be in the upright position (wires down) to work properly.

Why is that? IIRC the RPM relay is placed horizontally in the car.

Michael
10-10-2019, 11:48 PM
Here's a pic if it helps any. The RPM relay is tucked in on the bottom layer so it's sometimes hard to distinguish.

46540



+1. I'm running Dave's solid state unit (highly recommend), and I have the relay that I got in DMC's relay and fuse update kit as a spare.

That's the cleanest and tidiest relay compartment I have ever seen. Now (In my mother voice as she sees a 21 yr old bikini babe, let's see her look like that after three kids), let's see what it looks like after a digital lock controller and Wings A Loft install!!!

dn010
10-11-2019, 11:20 AM
Here is a Fun-filled-fact concerning rpm Relay (and any other relay, for that matter).- Relay should ALWAYS be in the upright position (wires down) to work properly.

I too am curious about this comment.