Log in

View Full Version : Quick AC question



Giamanut
10-21-2019, 11:50 PM
Low pressure port is
A) center on the back of ac compressor?
Or
B) outboard on the back of the AC compressor?

Ron
10-22-2019, 12:21 AM
On the back plate, there should be a large "S" = Suction = Low Side, and a large "D" = Discharge = High Side.

The "D" is USUALLY in the center as in the pic in this post:
http://dmctalk.org/showthread.php?17562-Trying-to-fill-A-C-system-blows-hot-air-and-high-side-has-low-pressure&p=248725&viewfull=1#post248725

Giamanut
10-22-2019, 08:12 AM
On the back plate, there should be a large "S" = Suction = Low Side, and a large "D" = Discharge = High Side.

The "D" is USUALLY in the center as in the pic in this post:
http://dmctalk.org/showthread.php?17562-Trying-to-fill-A-C-system-blows-hot-air-and-high-side-has-low-pressure&p=248725&viewfull=1#post248725

Thanks Indeed it is! sorry got lazy for a minute.

Josh
10-22-2019, 02:21 PM
To further add to this thread, the High side is the small hose, and the low side is the large hose.

Giamanut
10-23-2019, 12:15 AM
To further add to this thread, the High side is the small hose, and the low side is the large hose.

Yep just wanted to double check!
Got another question that I am not to concerned about yet but!
Just did a fuel pressure check Engine off 40F and got 25 psi control and 80 main held 40 psi after disconnecting the Fuel pump Jumper for at least 20 mins.
Does this sound about right?

Ron
10-23-2019, 03:41 AM
Yes, good readings!

Giamanut
10-23-2019, 06:44 AM
Yes, good readings!

Awesome thanks!