Frequently valve harness

[seventy4burban]

Probably a long shot but I need the harness that goes from the Frequency valve to the bulkhead. Mine is BBQ'd at a minimum. I'm trying to get my car back on the road.......(likely selling it)

Sent from my Pixel 2 XL using Tapatalk

[FABombjoy]

I have 3 different original jetronic connectors. Can't recall the FV wire colors offhand but any one of these will connect.

https://imgur.com/a/q2WHtmi

[David T]

If the plug is still intact you should be able to just replace the wires and the covering. Solder and use heat shrink tubing.

[FABombjoy]

They always seem to be stressed due to a 180 degree bend in the original harness. The harness should really have been a few inches longer. I would only reuse the original housing but never the pins.

[seventy4burban]

If the plug is still intact you should be able to just replace the wires and the covering. Solder and use heat shrink tubing.

The plug is cooked. The wires shoot fine continuity wise but I'd like to replace it if possible.

[seventy4burban]

I ordered some pigtails, I am going to repair and rebuild mine....