PDA

View Full Version : Need Garage Ideas - Post Your Photos!



DavidProehl
04-05-2020, 11:38 PM
Next year I'm planning to do some work on my garage. I'd like to do just about everything: coated floors, cabinets, workbench, heat, etc. I'll do a lift eventually, but probably not right away. I have a standard 3 car wide garage and a ceiling that is at about 11 feet (I'm out of the country right now and can't measure to confirm, it might be 10 feet). I will have 3 cars to park in the garage, so no pinball, couch or other game room type stuff will work for me.

I'd love to see ideas from everyone on what you have done, brands of cabinets you'd recommend, or companies you've worked with that do interior design work for this type of thing.

I'd like it to be DeLorean themed so my initial thoughts are black trimed stainless cabinets and grey and black speckled epoxy flooring. This is also a good chance to hide or get rid of some of my garage clutter. Finally, what art do you display? I have a 1/3 scale dealer sign to hang but I'm also thinking maybe favorite photos of my car or vintage photos from the DMC plant.

I've attached some poor photos of my garage in its current state for reference below. Thanks in advance for your ideas!


63244 63245

jackb
04-05-2020, 11:44 PM
You don’t have any toolboxes or workbenches? I have a three-car garage too, and I can barely squeeze in the Delorean.

63246 63247 63248

DavidProehl
04-06-2020, 02:46 AM
No, I don't have any of that. In the 12 years I've owned the DeLorean I've made due with using the lid of my trash can as a workbench and tools spread across shelving or the floor. It is a bit of a mess and certainly not convenient. I'd like to put things together a bit nicer now.

I'm thinking something along the lines of examples shown at https://www.garageliving.com/. Something with a clean look.

Here is one of their images. Not sure where my snowblower would sit in a setup like that.
63250

JBaker4981
04-06-2020, 09:28 AM
I thought you were moving over the pond at some point, or was that someone else?

Hill Valley PD
04-06-2020, 10:05 AM
I too have a standard 3 car, wish it was a 3.5 or our neighborhood allowed sheds, so I wouldn't have to keep lawn equipment inside... A 10 ft ceiling is a bit low for a lift if you plan to put a car underneath your DeLorean unless it is super low. I have 9' and 10' ceilings, due to a support beam, so no lift for me. However, if you just use it to work on the car it should be fine. I will snap some pictures later to show you what I mean.

DavidProehl
04-06-2020, 11:44 AM
I thought you were moving over the pond at some point, or was that someone else?
That is me. I'm in Singapore now. I should update my location on my profile here. I still have my house in the US though, and the DeLorean. The plan was to be back every few months, but this COVID business sure is messing that plan up. Anyway, still doing projects at the house, and hoping to work on the garage next year during trips back.


I too have a standard 3 car, wish it was a 3.5 or our neighborhood allowed sheds, so I wouldn't have to keep lawn equipment inside... A 10 ft ceiling is a bit low for a lift if you plan to put a car underneath your DeLorean unless it is super low. I have 9' and 10' ceilings, due to a support beam, so no lift for me. However, if you just use it to work on the car it should be fine. I will snap some pictures later to show you what I mean.

Awesome, would love to see the photos when you get the chance!

mhanch
04-24-2020, 12:38 PM
My Delorean has space at the back section of my garage. I'm lucking that it has enough space to work as a shop.

63415

Jack
04-24-2020, 05:20 PM
My Delorean has space at the back section of my garage. I'm lucking that it has enough space to work as a shop.

63415

Which Roku model are you running on your Garage TV?

mhanch
04-24-2020, 06:02 PM
It's the original Roku Stick. I had it leftover so I threw it up on the wall. good for Amazon Music and videos. but not the fastest.

DavidProehl
04-24-2020, 09:37 PM
My Delorean has space at the back section of my garage. I'm lucking that it has enough space to work as a shop.

63415

Nice! Thanks for sharing. For such a small space you have used it incredibly well. Looks great! I really like your storage, very organized. Your rolling toolbox is an excellent idea. Makes for a lot less running back and forth.

mhanch
04-27-2020, 06:57 PM
Thanks. Rolling toolboxes are the best. I also have one of those silicone tool trays to put on the engine to hold stuff. really helps to keep from dropping things.

Delorean3610
05-01-2020, 10:03 PM
Sometimes you need to be prepared for everything.63576

DavidProehl
05-01-2020, 10:35 PM
Sometimes you need to be prepared for everything.63576

Whoa! Looks like a professional shop! Hmm, maybe if I ask my wife to park on the driveway it would give me a space that looks a little more open like that. :hihi2:

Jason
05-08-2020, 02:45 AM
This is my too much stuff and not enough space garage.

63637

DavidProehl
05-08-2020, 05:22 AM
This is my too much stuff and not enough space garage.

63637

Functional and room for a Sera works for me! What more do you need? :)

Jonathan
05-17-2020, 11:56 AM
Here's how I keep my screw drivers in the garage. Definitely not fancy. Or expensive. Just functional. Piece of wood with a bunch of evenly spaced out holes drilled in it and then screwed into the studs with a couple of L brackets. Makes good use of a small amount of space and they are always right there where I need them, when I need them.

63731

Timeless
01-13-2021, 03:38 PM
Did a garage remodel this past October/November. Here is the list of all that was completed + before and after photos:
65315
65316
- Remove old crusty workbench and dated/dim fluorescent ceiling lights
- Fill hundreds of holes in stucco walls and ceiling drywall
- Re-wire electrical as needed and relocate 60amp 14-50 outlet between doors for EV charging
- Install 60' retractable hose reel next to water heater for vehicle washing
- Paint entire garage Benjamin Moore PM-1 white
- Install 1" wide frosted lens interconnected LED strip lighting in 6500K. 7 4-ft. tubes used (BRIGHT!)
- Install screw-less electrical outlet covers
- Strip whatever floor coating was there and apply polyurea marine coating in grey with heavy flakes and low-gloss top coat (not slippery)
- Install NewAge BOLD 3.0 7-piece cabinet set w/extra base cabinet for Red Bull fridge. Applied gloss STEK PPF to stainless worktop for scratch protection. Power strip w/USB ports added. (speakers, Bluetooth, neon sign, etc...)
- Install remote controlled color-changing LED strip on top of cabinets at rear
- Magnetic spice rack for spray bottles and shop towel dispensing
- Install 2 18" Air King commercial fans at backwall. Controlled with existing switch on wall (Model 9318)
- Install 3D printed Nürburgring track on door to house

DavidProehl
01-13-2021, 03:46 PM
That is great! Looks so clean! Love the flooring. Any ideas on wall hangings, decorations?

Timeless
01-13-2021, 04:54 PM
That is great! Looks so clean! Love the flooring. Any ideas on wall hangings, decorations?
Thanks. My entire neighborhood is jealous of the floor - it truly is amazing and I'm beyond happy with it. I have some laminated framed vintage 1950's auto advertisements I'm hanging as well as some other ideas in the pipeline including was water-jet cut stainless DMC letters to go somewhere. I like the clean minimalist look so the walls will not be loaded with stuff.

David T
01-13-2021, 05:19 PM
I have a large workbench with a big vise mounted to it. I keep my toolboxes small enough and light enough that they can be easily carried so I can do work "mobile". When they are home they sit on the bench. Tools are segregated according to the size of the job and type of work. I also have a 3 car garage and a lift. 11 feet is just enough height for low cars. Among the things to get are heat, good lighting, plenty of outlets, 220 electric for the lift and welder, door bumpers on the walls so you don't hurt the doors, wheel stops so you know where to stop with the car, an air compressor for tires, and air tools, a sink to wash up in, and don't get an epoxy floor. It scratches up way too easily. I did it and now I am sorry. Just get the floor sealed, no color unless you don't care what it costs and you get terrazzo (very expensive!). Insulated garage doors and a high lift door with a jackshaft opener so you can fit the lift in and not hit the door. I painted the walls and ceiling gloss white. On the walls there is a black 2" stripe at 5 feet and from the stripe to the floor is a semi-gloss light grey. Reflects light well and is easy to clean. I have a bunch of 8' 2 and 4 bulb fluorescent lights and I added lights to the underside of the lift for lighting underneath. A lockbox for keys to all of the vehicles. A mobile cart with all of the cleaning and detailing supplies. A central vacuum with a long hose. A Master Blaster to dry the cars when you wash them. A pressure washer to blast the dirt and cover it with foam to clean them. A retractable reel for the water hose and the air hose. A nice large clock so you know when to stop for dinner. A radio is nice and a phone you can reach. A BIG fire extinguisher. Some of the accessories you will need are, jackstands, floor jack, shelving, fender covers and old towels. Several rechargeable LED magnetic lights. No one starts out with all of this stuff, you usually accumulate it over the years as you need it. Then there is the trailer so you can take the car long distances or bring back "dead" ones to work on. It needs a bunch of it's own stuff like winches, straps, etc. Having a nice place to work is great. A clean, well organized place is so nice to work in. Beats working on the ground outside in the weather in the dark! I am getting too old for that!

Timeless, what kind of floor is that and who did it? I did epoxy and it gets all scratched up. I went with the light grey with the speckles. They grind the concrete and then put one coat of grey with the speckles and then a clear over it.

Timeless
01-13-2021, 05:20 PM
Holy run-on paragraph! Sounds great - any photos?

Timeless
01-13-2021, 05:24 PM
I have a bunch of 8' 2 and 4 bulb fluorescent lights and I added lights to the underside of the lift for lighting underneath.
Dump the fluorescents and get LED. SUPER bright especially for aging eyesight and they don't take space (1")

https://www.amazon.com/gp/product/B07DNPL2VC/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1

David T
01-13-2021, 08:37 PM
I am currently in the process of moving so I get to do the garage all over again. I am looking into LED lighting. Not only is it brighter, it is way more efficient. I was not happy with the way the floor came out in my current garage so I am looking for better ideas. The floor in your garage looks spectacular. Another thing I don't like about the epoxy is when it gets wet it gets REALLY slippery! But if you make it too rough you can't easily sweep it or mop it. Can you elaborate on how you did the floor? Was it ground down or chemically etched? How many coats, etc?

Michael
01-13-2021, 08:57 PM
Holy run-on paragraph! Sounds great - any photos?

:histerical1:

My garage is a small 2 car garage, well lit, good for simple jobs.

65317



But I use my neighbor's setup for most big jobs. Has plenty of room and a lift. It was a big hit at our East Tennessee tech meet(as well as the relaxed mask orders we enjoyed). I need to replace an axle boot next.

65318

Timeless
01-14-2021, 09:21 AM
I am currently in the process of moving so I get to do the garage all over again. I am looking into LED lighting. Not only is it brighter, it is way more efficient. I was not happy with the way the floor came out in my current garage so I am looking for better ideas. The floor in your garage looks spectacular. Another thing I don't like about the epoxy is when it gets wet it gets REALLY slippery! But if you make it too rough you can't easily sweep it or mop it. Can you elaborate on how you did the floor? Was it ground down or chemically etched? How many coats, etc?
My floor is polyurea and LOW gloss with heavy chip treatment. NO SLIPPING even during rainy south FL summers and highly resistant to humidity. Original coating (paint?) was ground away and 2 coats applied before the chips. I've been in plenty of high-end garages over the years and seen all kinds of floor treatments. This floor takes the cake.

David T
01-14-2021, 10:50 AM
Exactly what product did you use for the floor, manufacturer and product name. Chips too. So you did grind first. Makes a horrible mess! But at least it isn't acid!

Timeless
01-14-2021, 11:04 AM
Exactly what product did you use for the floor, manufacturer and product name. Chips too. So you did grind first. Makes a horrible mess! But at least it isn't acid!
Here's some detailed info: https://allgaragefloors.com/polyurea-polyaspartic-coatings/

Must grind first unless it's new concrete. There CANNOT be any oil, grease, stains, dirt, etc... otherwise any coating will lift/crack after some time. I believe it was a Benjamin Moore product.

David T
01-14-2021, 01:33 PM
Here's some detailed info: https://allgaragefloors.com/polyurea-polyaspartic-coatings/

Must grind first unless it's new concrete. There CANNOT be any oil, grease, stains, dirt, etc... otherwise any coating will lift/crack after some time. I believe it was a Benjamin Moore product.

Did you use the 1 part or the 2 part? How was the smell?

Timeless
01-14-2021, 02:27 PM
Did you use the 1 part or the 2 part? How was the smell?
2. Strong smell but overbearing. Couple weeks with door open a few hours per day and it went away.

David T
01-14-2021, 04:20 PM
2. Strong smell but overbearing. Couple weeks with door open a few hours per day and it went away.

There is now a 1 part Polyurea coating being offered. Supposed to be just as good with much less smell. I am going to have to check with some local contractors that do this stuff and see what they offer. Between the grinding of the concrete and the smell of the coating, I will pay to have it done. Hopefully before I move in. Thanks for the info Timeless.

iflights
01-15-2021, 06:59 PM
Whoa! Looks like a professional shop! Hmm, maybe if I ask my wife to park on the driveway it would give me a space that looks a little more open like that. :hihi2:

Good luck with that!

Delorean3610
01-17-2021, 02:32 AM
Here is my family’s garage setup.65337

Timeless
01-18-2021, 09:47 AM
Here is my family’s garage setup.
Tons of space - nice! Having a hoist is great.

DavidProehl
04-29-2023, 07:10 PM
Thanks again everyone for your posts, so great to see all your setups! It took a couple years, but I finally got the garage project done. Here are some before and after shots, also some photos of the car posing in its new home :cool1:

69624 69625 69626 69627

69628 69629

Delorean Jason
04-30-2023, 11:50 AM
Thanks again everyone for your posts, so great to see all your setups! It took a couple years, but I finally got the garage project done. Here are some before and after shots, also some photos of the car posing in its new home :cool1:

69624 69625 69626 69627

69628 69629

Wow, very nice transformation. Looks good.

Josh
04-30-2023, 05:16 PM
Are you renting it out? looks nicer than my house. Im on my way with a sleeping bag.

DavidProehl
04-30-2023, 08:44 PM
Are you renting it out? looks nicer than my house. Im on my way with a sleeping bag.

For the right tenant of course! Heck, if you throw in some of your expert DeLorean services I think we can work out a rent free situation :smile:

Mark D
04-30-2023, 10:48 PM
What a transformation! Even the "before" is nicer than my garage :lol:

GS450-Junkie
12-04-2023, 06:28 PM
Thanks again everyone for your posts, so great to see all your setups! It took a couple years, but I finally got the garage project done. Here are some before and after shots, also some photos of the car posing in its new home :cool1:

69624 69625 69626 69627

69628 69629

Will you please build me a small dealership sign like that???? I will pay anything. !!!