Log in

View Full Version : Best adult beverage to have when replacing fuse box?



Lwanmtr
08-01-2020, 02:34 AM
Ok, so Im slowly getting to the point where I'll be planting myself in my car and replacing the fuse box (still have a bunch I can do while i put that off, though)...

Wondered what the best adult beverage is to have with my during my imprisonment as i cut n clamp the 2 million wires?

Also whats the best way to remain relatively comfortable and avoid an aching back.

Ive offered free ice cream (kroger brand, not fancy) for someone to come do it for me...wonder why no takers? lol

Toby has given me some good suggestions to make it a little easier to get to the wires, and Im sure the time (about 3 hours according to Toby) will go in an instant.

Michael
08-01-2020, 10:54 AM
Remove the passenger seat altogether.

BLWNAWY
08-01-2020, 02:50 PM
Wondered what the best adult beverage is to have with my during my imprisonment as i cut n clamp the 2 million wires?



That's easy: 64121

DMC-81
08-01-2020, 03:47 PM
Remove the passenger seat altogether.

+1. Also use a soft pillow to put under your knees as you will be on them for a while, leaning over the fuse box.

Do yourself a favor, get a quality crimping tool like this one from Grainger:
http://dmctalk.org/attachment.php?attachmentid=44708&d=1469142388

I put a small piece of heat shrink tubing on each wire before crimping and shrunk it around the crimp area, like so:

http://dmctalk.org/attachment.php?attachmentid=44729&d=1469219370

All done:
http://dmctalk.org/attachment.php?attachmentid=44732&d=1469219923

It's been 4 years since I did the job in the July Florida heat, so my beverage of choice was Bud Light Lime.:cheers:

Lwanmtr
08-01-2020, 03:48 PM
Remove the passenger seat altogether.


Ha..already waay ahead of ya on that...my seats havent been in the car for over 4 years now. Not putting them back in til I get the fuse box back in, binnacle and dash buttoned up and
maybe even new seat covers.

Lwanmtr
08-01-2020, 03:49 PM
That's easy: 64121

Not a fan of wine...but where do you get that? hehe

Lwanmtr
08-01-2020, 03:52 PM
+1. Also use a soft pillow to put under your knees as you will be on them for a while, leaning over the fuse box.

Do yourself a favor, get a quality crimping tool like this one from Grainger:
http://dmctalk.org/attachment.php?attachmentid=44708&d=1469142388

I put a small piece of heat shrink tubing on each wire before crimping and shrunk it around the crimp area, like so:

http://dmctalk.org/attachment.php?attachmentid=44729&d=1469219370

All done:
http://dmctalk.org/attachment.php?attachmentid=44732&d=1469219923

It's been 4 years since I did the job in the July Florida heat, so my beverage of choice was Bud Light Lime.:cheers:


Hey..thats the exact tool I bought recently...lol

Nice idea on the shrinkystuff.

I'll keep the bud light lime on the list...hehe

Bitsyncmaster
08-01-2020, 03:53 PM
Pull the metal plate so you can just turn the old block over and move it out of way. Then cut one wire at a time and install in the new block side by side with the old one. Try to untangle each wire back as far as possible in the harness. That will make very few wires needing to be extended. Just do 4 fuses at a sitting and take a break. So what if it takes you a day or two.

Lwanmtr
08-01-2020, 04:05 PM
Yeah, Toby mentioned opening the harness a bit to allow the old block to be moved and get easier access.

Day or 2...hehe...He said it was like a 3 hour job..but I expect alot more, since I dont do this often and want to take my time, given this is like a super critical part..no room for error.

Still no takers? free ice cream...ill even spurge for chocolate..oooooh.

Bitsyncmaster
08-01-2020, 05:22 PM
Yeah, Toby mentioned opening the harness a bit to allow the old block to be moved and get easier access.

Day or 2...hehe...He said it was like a 3 hour job..but I expect alot more, since I dont do this often and want to take my time, given this is like a super critical part..no room for error.

Still no takers? free ice cream...ill even spurge for chocolate..oooooh.

I soldered and heat shrink-ed all the crimps and new wires so yes that does make the time 3 or 4 times longer. Not sure if it's worth it to solder and heat shrink.

That break you take drinking that beer also added a lot of time.

Lwanmtr
08-01-2020, 05:33 PM
I soldered and heat shrink-ed all the crimps and new wires so yes that does make the time 3 or 4 times longer. Not sure if it's worth it to solder and heat shrink.

That break you take drinking that beer also added a lot of time.


Dont think I'll be soldering them, not really needed and I'm not great at it..though I've been using a model detailing magnifier with clamps lately..helps hold the wires together..but not
enough flat space to use it in the fuse area.

Well, at least there's nothing there that will try and cut my fingers off while Im working there. (I hope).

BLWNAWY
08-02-2020, 03:14 PM
Not a fan of wine...but where do you get that? hehe

It was specially bottled for PNDC in 1987. I doubt many bottles still exist.

Lwanmtr
08-02-2020, 04:50 PM
Hehe..maybe a 2020 version..or 2021 for the 40th...hehe

ZLoftsgard
11-25-2020, 07:58 PM
Hi All. I was curious if you all recommend the modern fuse box offered by DMC? Seems like this is the best option that I have seen. Tnx.

DMC-81
11-25-2020, 09:20 PM
Hi All. I was curious if you all recommend the modern fuse box offered by DMC? Seems like this is the best option that I have seen. Tnx.

Yes. That is the kit I used, and was happy with it.