Drayron Sequential Tail Light Boards

[bigmac]

Hi everyone,

I have received my Drayron tail light boards.

Based on what is available on the market these units blow anything out there away.

They are totally plug and plug with no additional wiring required.

During the travel to New Zealand the firmware revision changed. All I had to do is plug the boards into my pc and run the program.

The quality of the boards, leds and adjustable flasher are top notch.

The packaging was great as well.

These work with the Dave McKeen side flasher boards as well.

If you are looking for this for your D then look no further.

I am one very happy customer.

Please note on one of the boards I had the 2 end leds the wrong way around.

https://uploads.tapatalk-cdn.com/20200823/f7b72ab5817c863219d000366fae7622.jpg


Sent from my iPhone using Tapatalk

[dmcnc]

I received mine last week as well and I'm very impressed!! The kit works perfectly, is easy to install (plug-in) and even includes a USD connection for future firmware/software updates.

[Jonathan]

How much are they and where do you buy them?

[Trstno1]

Any video of these working?

[dmcnc]

Any video of these working?

https://drayron.com

[Josh]

I have a set of these on my car, put about 10,000kms on just this summer with them. They work great.

Quality product and they look great. Get lots of compliments about them.

https://www.instagram.com/p/CC6ojz7p_9G/

[Mark D]

I'm interested but I see on the website they are currently out of stock. Any idea when there will be more available?

[JETS 81 DMC]

I'm interested but I see on the website they are currently out of stock. Any idea when there will be more available?

Mark,

Their time frame to have back in inventory is next week. Pretty neat for a turn signal mod.

My parents had a 1968 Cougar that had that type of rear turn signals.
I have a few stories I will have to share with you sometime about that car and me. :cheers:

Email From Today:
"We will be adding more stock next week. A message will go out to the mailing list when they are available."

Ray Anderson
DRAYRON LLC

[Mark D]

Nice! Thanks for the info on the boards, I'm really tempted to pick up a set.

[DMC-81]

Very cool product. :thumbup:

[JETS 81 DMC]

Just a FYI:

As of today they have 6 kits in stock.

[Lwanmtr]

Im interested, but the site says *This product is sold for off-road vehicle use only. What does that mean?

[Mark D]

Unless the sequencer modifications are DOT approved then it's probably not technically legal. By stating "Off road use only" it basically means use at your own risk. Similar to "For static display only" or "Parade use only", etc.

I think the point in stating that is so if you get pulled over by the cops for illegal tail lights/turn signals the manufacturer can't be held responsible since they weren't intended for on road use.

I'm no lawyer, but if you were ever rear ended driving with modified tail lights whoever hit you might have a legal argument against you. If they were to claim that the tail lights were too dim, or didn't work properly you might have a hard time explaining that away with non-DOT approved equipment.

In the US typically the first blink of a turn signal has to meet all of the FMVSS standards for the signal light on it's own, and the subsequent blinks do not count towards meeting the required brightness and duration. On some new Audi models with sequential/bar tail lights the US gets slightly different versions than Europe does for this reason.

There is either an additional light that blinks along with the sequential bar of light so the first blink meets the requirement.
https://gfycat.com/blackandwhitefearlessallosaurus

https://gfycat.com/blackandwhitefearlessallosaurus


or the section of the light bar that initially lights up is large enough to pass the requirements on its own.
https://gfycat.com/educatedfastfattaileddunnart

https://gfycat.com/educatedfastfattaileddunnart

[orangecrrrush]

I got mine this week.

The install was easy. It took me 45 min to complete.

What a great mod.

Came very well packaged. I was able to use the packaging it came in to store my original boards.

Thanks again!

Adam

[dmc-4625]

I previously had the original stock boards with LED installed and they were acceptable but..... I ordered, received and installed the Drayron Tail Light Boards and I was blown away. The higher power LED are really bright. When the brake is pressed all the normal brake lights light up but also the running light. A dual element bulb in the running light spot makes it much, much better and brighter. I would recommend them to all Delorean owners to install not only for the cool factor but because they make a much safer car. I have mine on sweep. Check out Skips car on YouTube.
https://www.youtube.com/watch?v=66McNkXpmFo&t=1110s

[DMC-Ron]

First of all, thanks for all the favorable comments and reviews on the sequencer kits. Our first two production runs sold out fairly quickly. We are currently midway in our third production run and now have stock available again for sale. As you might expect given the current situation, some of our component suppliers have experienced minor problems getting product to us. Our boards are assembled here in Oregon using a pick-and-place robotic assembly, It's kind of fun to watch and we hope to post a video showing the assembly soon. The latest version of the sequencer kit can accept an optional input board. The inputs take a 12 volt signal and can be programmed for most any desired affect. Currently we have a firmware upgrade that programs the input for compliance with the UK Fog Light requirement.

Additionally, just to peak your interest, we have a new taillight product to be unveiled shortly.

Thanks again for all your support and patience.

Ron
DRAYRON
64754

[Timeless]

I jumped on the boat as well and purchased a set. Can't wait to get them installed.

[Lwanmtr]

Yeah, Im getting close to that point, since Im 95% done with the things I can do here, before sending her up to Toby for full inspection and to get all the big stuff I cant do done..hehe.

[Timeless]

UPDATE: I constantly get positive comments about how clean and bright my tail lights/rev/signal lights are. Zero reason to look elsewhere for tail light boards. Drayron 1 and done.

[Mark D]

I finally ordered a set of these. Can't wait to get them installed. :woot:

[Timeless]

I finally ordered a set of these. Can't wait to get them installed. :woot:
:cheers:

[Mark D]

Only took two months, but I finally got around to installing these today. I'm super happy with how they turned out, and the installation was really easy thanks to the very well done instruction book.

The most difficult part was reaching up under the steering column to install the adjustable flasher relay. Once I was able to get my hand on it though it wiggled free pretty easily. The tip in the instructions about turning on the flashers while locating the relay it helped with finding it by feeling the relay clicking.

The only thing I might change is reverting the running lights back to standard mode instead of having all three bulbs lit. It's pretty rad that it's even an option to choose from though. Really impressive hardware overall, and amazing how it's literally plug n play.

https://dmctalk.org/attachment.php?attachmentid=68805&d=1660785915

https://dmctalk.org/attachment.php?attachmentid=68804&d=1660785901

https://dmctalk.org/attachment.php?attachmentid=68806&d=1660785954