Any tips/advice on replacing the lower control arms?

[at88mph]

Welp, just got my new LCA's from DeLorean Go and plan to install them this weekend. Any tips or hints I should know about? I also got the Drayron tail light circuit boards and they are AMAZING!! Thanks in advance! :cheers:66007

[chris williams]

Not particularly, slow and steady. Make sure you get the control arm supports in the correct orientation! You may find a jack helpful under the LCArms to re-connect the hub to the upper control arm. Getting the lower shock mounting in can be a bit fiddly (depends on the type of shocks/dampers you have) and you 'may' need additional spacers.
Chris

[at88mph]

Great! :) Thanks for the info! :cheers:

[Chris 16409]

Make sure you have some quality spring compressors. If you have original springs, you need to grab 6 coils with the spring compressor. Any less and you won’t be able to remove the spring. A ball joint separator folk tool may be helpful as well.