Log in

View Full Version : HD tv



Bitsyncmaster
10-08-2011, 08:37 PM
I should have asked this before today but figured this would be good help with anyone buying another TV.

I just bought a 32" TV for the bedroom. I got a 1080p LED one not because the picture is noticeably better but I just like the power savings of LED back lighting. There was a big push last year on 3D TV and 240 Hz. but that seems to have died off.

Most 32" inch are 720p but most 37" or more are all 1080p. Not much difference in the price of a 32 or 37, 40 so you probably will get a better buy going to a larger format.

I can't recommend any brand because I don't have any problems with my VIZO, Phillips or Sharp.

jangell
10-08-2011, 11:39 PM
Other fun details are that some smaller 720p HDTVs are actually 1360x768 computer monitor panels, meaning they have to scale the image to fill the screen (even my fairly nice Sharp 20-something display is this res, but since I watch only DVDs, iTunes NetFlix and Hulu and the TV is mostly a glorified computer monitor, this doesn't really matter to me).

For those looking for more flexibility, pretty much any modern HDTV can be used as a computer monitor through HDMI or DVI (older ones also support VGA). Modern HDTVs are basically just computer monitors that support a specific set of resolutions and have built-in TV tuners. You can get adaptors to/from DVI, HDMI and DisplayPort, since they all use the same underlying video tech (although you'll need to run the audio separately for DVI).

Lastly, there's a limit to the resolving ability of the human eye. If you google around, you can find a chart for the distance you need to be from a specific size of display before you can make out the detail in 1080 or 720 given 20/20 vision. Here's a handy one:

http://http://hd.engadget.com/2006/12/09/1080p-charted-viewing-distance-to-screen-size/

TV is 30 or (less often) 60 Hz (aka cycles (which in TV terms means frames) per second, or FPS); the 120 and 240 Hz displays use tricks to interpolate the image in an attempt to reduce slight stuttering effects, which are apparently noticeable on smooth pans on 2:3 pulldown conversions (ie: from 24 FPS film transfers, like most prime time TV shows and feature films). Not sure how many people will notice that. Heck, most people set their HDTVs to fill the screen irrespective of the proper aspect ratio for the content, so I imagine image quality isn't that high on their list in the first place. For 3D TVs, the Hz is effectively halved when watching 3D content, depending on the method used, as half frames go to one eye and half go to the other eye.

Some TVs (I think only some LED backlit ones) support local dimming, meaning that if that part of the frame is dark, it will actually dim the backlight for that part of the screen, giving you deeper blacks and thus more contrast. I believe this is a higher-end feature, though, and probably more useful if you're in more of a home theater setup with a dark room and a large TV and a good sound system. Most TVs just leave the backlight on all the time for the entire display.

No sure if this'll help anyone or just confuses them more -- and we haven't even gotten into i vs p yet. :). Or HDCP (the copy protection mechanism that limits your ability to use any old computer monitor as a TV unless it has and HDMI port on it).

I have a Sharp and a Samsung, and both work well. I know people with large Vizios who like them quite a lot. I think the higher-end TVs are good if you're feeding analog NTSC (ie: old-school standard def signals) into them, since they'll probably do a better job of cleaning up the analog signal for digital conversion, but I don't want much analog content anymore (as I said, everything is upscaled DVDs played on my computers or internet-based content). Many computer monitors now have HDMI inputs so you can use them as TV displays with a tuner (like a cable box). It may also be possible to connect HDMI to DisplayPort (which also supports HDCP), but I'm not entirely sure about that (DVI does not support HDCP).

-- Joe

Bitsyncmaster
10-09-2011, 05:17 AM
Thanks for that info Joe. Forgot to mention, this new set asked, (during setup) if this unit was for home or business. What's up with that. Guess I should read the book:headbang:

jangell
10-09-2011, 10:09 AM
That's a new on to me. I bet it just changes some color presets, or maybe limits what you have access to from the remote so that random people don't screw things up too much.

I am curious, though. It's hard to google for those terms and find a useful answer without knowing the make and model of the TV (which would probably just lead me to the user manual anyway :) )

-- Joe

Bitsyncmaster
10-09-2011, 11:51 AM
Phillips 4500 series / 32PFL4505D

TTait
10-09-2011, 02:42 PM
I'd read the warranty very very carefully before answering the business/home question. A lot of equipment has limited liability for the warranty in commercial settings. Its a developing trend that is expanding across different sectors in the AV industry

When used in a commercial or industrial setting the duty cycles and environmental conditions can be a lot harder on equipment, and such service can be exempted from the warranty. Its also common to void the warranty by using the equipment more hours in a year than the fine print allows. Many projectors for example have a 3 year warranty (except for lamps) but void the warranty if you use it for more than 1000 or 2000 hours per year.

jangell
10-09-2011, 05:45 PM
Phillips 4500 series / 32PFL4505D

The docs say that Retail mode uses more power by making the backlight brighter, which is probably useful in bright store displays. it also does not save any changes tp the settings when you turn it off. Home mode uses less power and allows for customization of various settings that are remembered between sessions. Sobthat answers that.

They don't make mention of any differences in the warranty, though.

-- Joe