Fixing lifted paint on fascia

[BladeBronson]

I probably caused this problem when I got a little too aggressive with a power washer (I thought I was far enough away to not cause problems... live and learn). The gray paint has lifted on the fascia. It's very pliable and easily lays flat just by pressing on it. I'm tempted to mask the black part and either spray some spray adhesive or use a bent wire (or something) to sneak some glue behind the paint and then press back into place. What's your take on this?

66601

[painterdave72]

that is from poor prep work it looks like. it will get worse.. u could maybe poke a pinhole in them and try a small amount of crazy glue to hold down for the time being...

[BladeBronson]

I know it looks like several air bubbles, but the bubbling has subsided now. It's actually about a 5" long complete separation at the edge. I wouldn't need to poke holes at all because the entire bottom edge is open at the moment.

[BladeBronson]

I ended up super gluing it. It’s passable.

66607