Things unique to the Delorean a "regular" mechanic needs to know.

[JIMJAM]

I have a growing list of things that I or another Delorean owner would that I am physically unable to do. The Porsche/import places want nothing to do with it and after watching a guy hammering on weights on the outside of my rare dark grey wheels chipping the paint and another putting a jack through the bottom of the car under the battery, I reluctantly need to again try and find someone. Before I post for a knowledgeable Delorean owner/mech soon to come or have it transported but 1st I want to try this one mechanic.

QUESTION- Pertaining to the following things I need done first. What if any nuances and things specific to the Delorean do you suggest a mechanic should know before you leave him the car?

They are... Clutch pedal is getting softer, fluid looks like bourbon I fished out green flakes in the tank. It needs to be flushed and I see slight former leakage around the rubber boot inside at the pedal. I have a new M cylinder so replace it.

2- Brakes need flushing, bleeding etc and a good overall inspection. They work well with some pull if you really stand on the pedal.

3- A/C- It has been iirc 10 years since a R134 conversion, all new hoses, compressor... Works well enough to keep you alive but over 85 and sunny and it cannot keep up. Needs to be tested and more than likely either some added or preferred evac, flush and the whole 9 yards.

Fuel filter is 10 years old and some other issues but the fluids, brakes, clutch, ac are the main things. I have found a master mech who owns a large respectable shop and maintains all of the SC vehicles for Lowes. When ask he seems to know the Delorean and also maintains his toys. I have all the manuals and a gig of every imaginable tech document, "how to" articles on the car on a thumbnail and laptop.

So anything of the above common car jobs that I need to pass on to a mech feel free to chime in. Or if you know anyone in the SC area who wants to come down I will make it worth their effort and if it takes over a day I will set you up in any local hotel of your choice. I live on Lake Murray 10 minutes off the interstate in Irmo SC.

Here is a partial list of things done to the car. None within the last 5-7 years listed.

Ac serviced
oil change/filter
Replaced steering bushing
New front calipers
Tail lights replaced with PJs
Replaced heater valve
New starter-
Replaced all water hoses
Replaced fuses,relays
Cleaned all grounds.
New plugs
Replaced WUR
Replaed rv mirror with wider one. Rv mirrors replaced with convex
Airbox cover,cold air induction.
Removed Exhaust manifolds
Removed Exhaust manifold studs
Drilled out broken manifold studs
Installed new manifold studs
Installed new exhaust manifold gaskets
Installed exhaust manifolds
Installed new SS starter heat shield
Installed crossover pipe with new gaskets
Replaced Oxygen sensor
Installed CAT with new gaskets
Straightened muffler brackets
Exhales.....Takes breath
Installed Muffler
Installed new otterstat
Repaired otterstat wiring
Installed third brake light
Tested fuel injector spray
Installed new fuel injectors
Installed SS fuel injector lines
Installed new fuel filter
Installed new supply line from filter to distributor
Inspected fuel pump compartment
Installed ignition cap & rotor
Installed 8mm ignition wires
Installed SS braided coil wire
Installed new coil
Installed slave cylinder
Bled clutch hydraulics
Adjusted clutch linkage, reverse now works
Cleaned out valley
Installed new vacuum solenoid
Installed new vacuum hoses
Installed new water pump
Installed new water pump hoses
Installed new Alternator
Installed new alternator belt
Installed new A/C belt
Pressure tested coolant system
Installed new emergency brake pads
Installed new springs in rear, after Hervey shocks failed
Installed new springs and shocks in the front
Installed new tie rod ends
Installed front end recall kit
Removed rear foam.Dynamated rear wall,rear floor.
New fuel pump kit. Johns kit
Tabs replaced
All new tires,balanced.
New headliner kit from DMC. Waiting-DONE
SS Throttle shield. SS door step outline full-DONE
SS louver support
Shift isolator installel. Also added dynamat.
New Dmc GAS CAP
15 POUND ss coolant cap.
Spring
Accumulator w/new flexible lines
Gear oil change -
replaced missing exhaust bolts, checked/tightened exhaust hangers, upper coolant hose bracket, otterstat, fill and bleed - 2hrs
lower coolant bracket
idler pulley bearings

SUMMER 09
A/C Compressor replaced.Hgh/low lines replaced. Accululator replaced.New orfice tube.Evacuated,recharged R134A.
Fuel filter K&N filter Bosche Plat 4+ plugs. Cold start valve. Freq Valve.
BF Goodrich Radial T/A 235/60/15 for the rears and 195/60/14 for the fronts.Rot/balance.
Front tie rod ends. Front end align. Hood weather stripping.Fuel pump cover resealed/painted.

Fall 09 10/10

INSTALLED KYB rear shocks with aluminum collars by Marty Maier - [email protected]
Emergency brake fixed. Cable replaced,l&r pads checked and adjusted.Bulb replaced in dash.
Angle drive "speedometer" replaced.
Fuel distributor replaced with NEW rebuilt form SpecialT.
Engine was tuned with fluke meter. Fuel pressures tested. Resting pressure testing performed.F injectors tested for spray pattern.
Cold start valve tested ok.Timing tested.
Fall - Door lights replaced with DMC LED lights.
Front trunk wood floor added. Cut to size and painted with rubberised underbody paint "Lowes".
DMC cold air induction hose added.

12/9/09-Replaced Master cylinder. Hooked up antenna wire to windshield antenna which had been cut. Right front speaker wires were crimped down. They easily come loose so check if speaker does not work.
12/28/09- Replaced front 2 speakers,unplugged rear 2 and wired up 2 box speakers.Unplugged non working windsheild antenna and hooked up "tune trapper" antenna.
"Owning a Delorean is like frying bacon naked."

[Helirich]

One thing I will recommend on the AC is tinted glass. I found that the AC works good when there's no sun. Even if you don't prefer dark tint, there is ceramic tint that is nearly clear. I had my windshield done with it and my wife said there's a differnce when wearing shorts and the sun is shinning on her legs. Same thing on the side glass when your driving south in the morning.

[DaraSue]

An obvious thing that can be overlooked - explain to them how to put it in reverse so they don't grind it when they drive it in/out of the bay! :facepalm:

[JIMJAM]

When I flew I had these cut to your pref tinted material that felt gummy that sticks onto glass. Both sides I cut to size and sticK on the inside. Also have a high rpm but fairly silent fan with a swivel base and a spring loaded clamp which I attach in betreen seats mounted on that board that runs across the rear.

Explaining proper door open and closure is important and to not dare touch that torsion bar. I painted red squares along the proper jack points.

All good tips Thanks. I would never other than tires have any of the generic brake or parts stores with a garage touch the car. IIRC Pep boys actually had the Delorean in their alignment database and is how I got mine done. Other than that at least my local area mechs are kids outta HS or places that replace parts. not actually fix anything.

[David T]

When you convert to -134 you lose about 10% of your cooling capacity. With R-12 you have approximate 24,000 BTU's or 2 tons. Unlike a house A/C, the A/C in car does NOT have a constant capacity. In a car the capacity varies because of vehicle speed, engine RPM, heat load, etc. As for what an "ordinary" mechanic needs to know to work on a Delorean, like most old cars, there is no computer or OBD port to figure out what's going on so the most important thing is he has to understand how things are supposed to work and be able to diagnose and fix problems when they don't. A skill that is lacking in most younger techs these days.

[JIMJAM]

Euroworx where my father takes his older Porsche told me straight up he or his mechanics don't have the time to read up on and learn as they go for ONE specific type. Nor could he guarantee the work and the shop rate would be $$$$$$.

The only thing close is a local man owns a 80s Countach which has a similar fuel inj system. I use to drive it for he preferred convertibles. He had a man who worked on British cars, TR6,7. 8s but moved.
Like me, his problem with the Countach is lack of driving at speed over a distance. We basically do 40 mph around a large scenic lake that is 23 miles. Not enough to blow out the crud and heat cycle the engine. He now takes his up to Charlotte approx 2 hours due N of Columbia.

Important that the D is running well and just wait till it cools off outside and worry about the fluids then.

[DMCMW Dave]

Euroworx where my father takes his older Porsche told me straight up he or his mechanics don't have the time to read up on and learn as they go for ONE specific type. Nor could he guarantee the work and the shop rate would be $$$$$$.

The only thing close is a local man owns a 80s Countach which has a similar fuel inj system. I use to drive it for he preferred convertibles. He had a man who worked on British cars, TR6,7. 8s but moved.
Like me, his problem with the Countach is lack of driving at speed over a distance. We basically do 40 mph around a large scenic lake that is 23 miles. Not enough to blow out the crud and heat cycle the engine. He now takes his up to Charlotte approx 2 hours due N of Columbia.

Important that the D is running well and just wait till it cools off outside and worry about the fluids then.

Can you get it up to Greenville? I'm getting settled in. Lift is in storage but everything else is available. We're on vacation at the moment but back in a couple of weeks. I could maybe come there if I don't need to haul an entire car full of tools.

[JIMJAM]

Hi... :)

Just solved? a issue and haven't driven the car any distance in a while but YES. We can wait until these blistering temps come down but either way would be fine.
I could even drop the car off with you so you could do it at your own pace and if the car needs any parts you can order them.

I obviously stress out and a little wordy but enjoy your vacation and this sounds like a plan. Thanks, Jim in SC.

[Bitsyncmaster]

Hi... :)

Just solved? a issue and haven't driven the car any distance in a while but YES. We can wait until these blistering temps come down but either way would be fine.
I could even drop the car off with you so you could do it at your own pace and if the car needs any parts you can order them.

I obviously stress out and a little wordy but enjoy your vacation and this sounds like a plan. Thanks, Jim in SC.

Take Dave up on that offer and finally get that running like a champ. Yes it's always better to have the mechanic working at his own place where all his tools and parts are located.

[JIMJAM]

Yeah man!!!!!!

There are the things that need to be done, those while you are there and those you run across.

I am in worse shape than my car and will also need to be lifted up on a rack and see whats going on. Jim

[JIMJAM]

Or Dave if you ever come by this way you can take the car and it's yours. She will have a full tank, a few boxes with enough spares to build another car, carte blanche to order what you need. A week, a month or winter. Zero rush when to do this and zero rush for whatever we decide to do to her. Love Greenville and if you haven't visit Biltmore Gardens if you want to see extravagance. This really takes a much needed load off my shoulders at a crucial time. Thanks Dave. :thumbup:

Also on the bottom of my earlier post is a partial listing of the things done to the car, most 10 years ago.

[DMCMW Dave]

Or Dave if you ever come by this way you can take the car and it's yours. ---

Also on the bottom of my earlier post is a partial listing of the things done to the car, most 10 years ago.

Like I said we'll be back in a couple of weeks. Yes, we moved across the country and 6 weeks later we are driving in Germany/Austria/Italy with our kids. I'll ping you here when I get back. Not ready to open up a shop but I've about caught up with the move-in projects and may be looking for some new challenges. It would really be cool if you could line up a friend with a garage lift! Not ready to bring a car back here yet, still looking in to adding some shop space for stuff like that.

[Helirich]

Love Greenville and if you haven't visit Biltmore Gardens if you want to see extravagance.

Funny to read this. I've visited the Baltmore several times and I always tell people to go see it. I always tell them to make sure they visit the gardens also. The house is impressive and interesting, but the gardens have plants I've never seen anywhere else in the world. It's quite expensive now, but if you have never been, it's worth it.

Ps, nice area to be driving a Delorean. (Twisty mountain roads)

[JIMJAM]

Glad you enjoyed the visit. My parents have been numerous times but for those wanting to go all out I would suggest waiting. They booked the highest tier and were disappointed the staff was running on a skeleton because of covid. Many of the perks were unavailable , closed.

There are a lot of things N in the mountains including DollyWood in Pigeon Forge. Who can resist that? My real reason for going is there is/was a indoor vertical air tunnel where you can do indoor skydiving. Looks like a grain silo but basically it was a large engine and blades pointing up at the bottom with netting suspended above it. You were weighed, given a specific color so the operator could dial in the strength to lift you.
Getting OT but near Ashville there is a large sign at the "Bat cave" exit. I thought I pulled over under it to have a look at my tires :rolleyes: and got a picture of the D and the BATCAVE sign....