Log in

View Full Version : DeLorean at SEMA



BLWNAWY
11-03-2021, 04:04 PM
A friend shot this photo at SEMA in Las Vegas. Can anyone shed any light on this car? Not what I would want but to each their own, I guess.

ssdelorean
11-03-2021, 04:10 PM
A guy in Japan did something similar a year ago. I'm guessing that is where the designer of this car was inspired from (or vice versa). This one is documented on a youtube's channel...


Episode 1
https://www.youtube.com/watch?v=qii-mC6Hr14

Episode 2
https://www.youtube.com/watch?v=KX4dWuXJpGM

DMC arrives at SEMA towards end of video
https://www.youtube.com/watch?v=FtkXsOYeTLM

ssdelorean
11-03-2021, 05:11 PM
[QUOTE=ssdelorean;268665]A guy in Japan did something similar a year ago.

-----snip-------

/QUOTE]


This video has the wide body DeLorean from Japan in it:
https://www.youtube.com/watch?v=sGKmLjHd1NY

Mark D
11-04-2021, 10:25 AM
I was following that build on youtube... I think the goal was 1000hp with the twin turbo LS setup. Not sure if it's actually running yet.

I'm not sure how I feel about the aesthetic they went with, but I can respect the work that went into the build so far. The car was previously painted and looking pretty rough when they got it, so at least it's getting some attention.

If they wrapped the fender flares with brushed metal vinyl, or fabricated some flares out of SS I think it would look much better than black.

These were the renderings they started with, so it looks like they were able to build something pretty true to the original vision.

http://dmctalk.org/attachment.php?attachmentid=67283&d=1636032212

http://dmctalk.org/attachment.php?attachmentid=67284&d=1636032224

Riley88
11-04-2021, 04:42 PM
Engine bay was well done and the lighting but damn is the widebody kit and lip so fugly

BladeBronson
11-04-2021, 10:22 PM
That car is garbage except for the glass louvers. I’ve always thought that glass louvers would be a cool update.

WHO1DMC
11-04-2021, 11:10 PM
That car is garbage except for the glass louvers. I’ve always thought that glass louvers would be a cool update.

I have the very same thoughts! If the materials used for the louvres don't discolor from sun exposure I like them as well.


Dave B.

ssdelorean
11-05-2021, 10:04 AM
I have the very same thoughts! If the materials used for the louvres don't discolor from sun exposure I like them as well.


Dave B.

Likewise. But you have to have some nice eye candy under them to show off to look great. My car's engine would be a very bad example for glass louvers :-)

mhanch
11-05-2021, 12:02 PM
It's not even the style really - it's just a shoddy job.

Helirich
11-05-2021, 10:06 PM
Is it only me that thinks the wheels look stupid with almost no tire? The flares don’t look bad in the renderings, but that original post pic looks terrible to me.

Josh
11-06-2021, 04:52 PM
I usually am proud to say I have had a part in any LS swapped delorean, but this one... this is awful.

It does not run or drive yet, about on part for a SEMA build. I am not sure how it will ever be a drivable car. He has grand plans to make 1000hp, but with his clutch , transaxle, and suspension setup it is not possible. The engine will do it.
Also has some cut and welded axles installed, not sure why as the stock axles work just fine. The engine cradle has been almost entirely destroyed to make room for a rear sump oil pan that will lend itself well to oil starvation issues on any sort of acceleration.

We were in touch when he first got his car, but he parted ways quickly to re-invent the wheel.

Dickey
11-08-2021, 01:34 PM
I think the welded axles were just a convenient temporary extension to accommodate how far forward they cheated the transaxle. As best I recall, adjusting the axle flanges forward more than about two inches forward of their OEM position results in curious CV joint features with the suspension travel at its extremes.

It could be an illusion from the angle of this screenshot but it looks like they put the 911 transmission quite a bit further forward than what I've seen with current LS builds:

67318

Michael
11-08-2021, 10:06 PM
Yeah the angle on those joints looked a bit extreme, especially for a high horsepower application. Then again the whole build had a "rushed" feel to it to just make the show schedule and the series episode. I would say I would have liked to have seen it done to a more exacting standard but I then realized I don't give a shit.

Dickey
11-09-2021, 11:18 AM
I don't think the angle is excessive for the CV joints, at least it doesn't seem to be from my personal experience with 70's era Eldorados and the insanity that some of the rock crawling guys bring to the woods. I just think they had to extend the axles on the quick to accommodate where the transmission landed and prevent the suspension travel from pulling on the joints.

Josh
11-09-2021, 10:57 PM
I use the same transaxle in my kits with a 10deg cv angle. It is pushed as far forward as possible, you actually need to cut the tail of the transaxle off.
There are no logevity issues, have been running my axles with way for 40,000 miles.
I simply use the stock axles with a small spacer to give the appropriate amount of plunge.

Timeless
11-12-2021, 10:02 AM
I usually am proud to say I have had a part in any LS swapped delorean, but this one... this is awful.

It does not run or drive yet, about on part for a SEMA build. I am not sure how it will ever be a drivable car. He has grand plans to make 1000hp, but with his clutch , transaxle, and suspension setup it is not possible. The engine will do it.
Also has some cut and welded axles installed, not sure why as the stock axles work just fine. The engine cradle has been almost entirely destroyed to make room for a rear sump oil pan that will lend itself well to oil starvation issues on any sort of acceleration.

We were in touch when he first got his car, but he parted ways quickly to re-invent the wheel.
Agreed. .....and they cut the left fender!! :ohcrap:

DrJeff
11-12-2021, 01:56 PM
The B is for Build crew talked to the DeLorean wide-body builders at SEMA. Starts at 25:34 in the linked video below.

DeLorean at SEMA on B is for Build (https://www.youtube.com/watch?v=aldUQm9KoQU)

My own view on this car... There are artists wise enough to recognize when they are not sufficiently talented or skilled to improve on or enhance the art of others, and then there are these guys (Salvage2Savage).

ssdelorean
07-06-2023, 04:43 PM
Just ran across thearsenale.com site and they are offering the Salvage to Savage DeLorean for only $265,000.
https://thearsenale.com/products/1981-delorean-dmc-12
And apparently you can buy more than one of them as their shopping cart allows you to put more than the quantity of 1 in the cart! :-)

Helirich
07-12-2023, 01:06 PM
I don?t understand where the tires go when you hit a bump. It looks like they are scraping the flares at rest. Can?t stand the turbo stuff hanging out the back.

ssdelorean
10-15-2024, 02:52 PM
... and now this guy is going to reproduce 15 more versions of the wide body car according to his u-tube channel (https://www.youtube.com/@MoceriAutocraft) on his new site: https://moceriautomotive.com/