Huge DMC Parts Lot! Some NLA Parts (priced generally below DMCH prices)

[RamblinDMC]

Photos link --->https://photos.app.goo.gl/XppMWqnmaPpQQkED9


Braided Stainless Fuel Line set $200
Idle microswitch and bracket $50
Flywheel $400
Rear View Mirror $40
Intake Manifolds (2 available) $400
W pipe $150
Headlight bracket left $20
Headlight Bucket and trim (very good condition) (30)
Charcoal canister $45
Charcoal canister cover $75
Good used WUR two available ($250)
Armrest Sub assembly (105228) $175
Light switch holder bracket $40
OEM blue ign coil $20
Thermo Time Switch good used (3 available) (40)
Oil Filters $5
Good Used Frequency Valve (2 available) $200
Set of banjo bolts ($20)
Good Used Injectors (16 available) (30 ea)
Mixture units (one is complete ($300) one missing the metering plate ($250)
Throttles (two available) ($250)
AC compressors and brackets (two available) ($150)
Used Sunvisors ($100)
Exhaust manifold gasket sets (one piece style) (20)
Cold Start Injector used good ($150)
Exhaust manifolds both sides ($100)
Water Y pipe $75
Lambda sensor $20
Thermal vacuum switch $45
IACV $100
NOS Bosch style Fuel Pumps $70
Oil Fill Cap two available ($50 for black one $40 for one painted blue)
Throwout bearing, clutch alignment tool, and pilot bearing kit new ($100)
Binnacle trim $50
Idle Speed Thermister $20
Louver and Door strut set $50
RPM Relay (New one $25) (Used $15)
Throttle spool ($150)
NOS Dizzy cap $20
Blue coolant bottle plastic $20
Idle ECUs $250
Used K&N Filter $45
Door handle Pass side $130
Black Airbox (both top and bottom) $40 (Blue one $20)
Distributor $200
Upper Pass side door panel $250
Lower Pass Side door panel $250
Right rear valance panel $40
Exhaust manifold gasket set $30
Turn signal lens $40

[Timeless]

How much for the coolant bottle mounting brackets?

[RamblinDMC]

Oops sorry forgot to price those. How about $25?

[RamblinDMC]

6 injectors sold
1 wur sold
Dizzy cap sold
1 thermotime sold
Fuel Line set sold
Headlight Buckets sold

[RamblinDMC]

Ac idler pulleys / brackets sold

[RamblinDMC]

Binnacle trim sold

[RamblinDMC]

K&N filter sold, IAC bracket sold, bag of banjo fittings sold

[RamblinDMC]

Coolant bottle sold.
One fuel distributor sold. One left.

[RamblinDMC]

Coolant bottle brackets sold.
2nd Fuel distributor sold

[RamblinDMC]

Flywheel sold

[RamblinDMC]

banjo bolts sold!

[RamblinDMC]

sunvisors sold

[RamblinDMC]

Prices lowered and list updated to what's remaining!


Idle microswitch and bracket $40
Intake Manifolds (2 available) $325
W pipe $100
Headlight bracket left $15
Headlight Bucket and trim (very good condition) (30)
Charcoal canister $35
Charcoal canister cover $70
Good used WUR two available ($240)
Armrest Sub assembly (10522 $150)
Light switch holder bracket $35
OEM blue ign coil $20
Thermo Time Switch good used (2 available) ($35)
Oil Filters $5
Good Used Frequency Valve (2 available) $175
Good Used Injectors (10 available) (25 ea)
Mixture units (one is complete ($275) one missing the metering plate ($225)
Throttles (two available) ($225)
AC compressors and brackets (two available) ($100)
Exhaust manifold gasket sets (20)
Cold Start Injector used good ($125)
Exhaust manifolds both sides ($75)
Water Y pipe $70
Lambda sensor $20
Thermal vacuum switch $45
IACV $90
NOS Bosch style Fuel Pumps $65
Oil Fill Cap two available ($45 for black one $35 for one painted blue)
Throwout bearing, clutch alignment tool, and pilot bearing kit new ($75)
Idle Speed Thermister $20
Louver and Door strut set $50
RPM Relay (New one $25) (Used $15)
Throttle spool ($125)
Blue coolant bottle plastic $20
Idle ECUs $225
Door handle Pass side $120
Black Airbox (both top and bottom) $30 (Blue one $15)
Distributor $175
Upper Pass side door panel $220
Lower Pass Side door panel $220
Right rear valance panel $35
Exhaust manifold gasket set $25
Turn signal lens $35

[RamblinDMC]

bump??

[Timeless]

PM incoming

[Deloking]

Are the exhaust manifolds still available?