RamblinDMC
05-09-2022, 11:40 AM
For sale are two complete manual transmission setups.
Basically everything you need for a manual swap except the pedal box, clutch master, and clutch line.
One is completely stock equipment.
Includes transmission, mounts, shift linkage, cross gate cable, shifter, flywheel, new clutch, pressure plate, throwout bearing, pilot bearing, clutch fork, and slave cylinder.
Transmission shifts well and everything works fine. All mounting hardware is included as well
The other setup (on the left) has been completely rebuilt with a bulletproof input shaft coupler from Nick Roedl. This setup includes a rebuilt shifter with a DPI stainless shift rod and weighted shift knob (not pictured.) Crossgate cable brackets at front of transmission are stainless from DPI and the shift linkage is a spherical bearing type of my own design. Also included is one of my stainless shift gates. This setup includes a practically new clutch that has only 2000 or so miles on it. I would like $5,000 for this setup. ($4k for the other)
Shipping/freight is available and will vary from 250 to 650 ish depending on distance from me. I'm in Farmington Michigan
Rebuilt/upgraded setup sold! Original setup up for grabs still
https://photos.app.goo.gl/zXnXC9eRCUbwf4jZ6
PHOTOS^
Basically everything you need for a manual swap except the pedal box, clutch master, and clutch line.
One is completely stock equipment.
Includes transmission, mounts, shift linkage, cross gate cable, shifter, flywheel, new clutch, pressure plate, throwout bearing, pilot bearing, clutch fork, and slave cylinder.
Transmission shifts well and everything works fine. All mounting hardware is included as well
The other setup (on the left) has been completely rebuilt with a bulletproof input shaft coupler from Nick Roedl. This setup includes a rebuilt shifter with a DPI stainless shift rod and weighted shift knob (not pictured.) Crossgate cable brackets at front of transmission are stainless from DPI and the shift linkage is a spherical bearing type of my own design. Also included is one of my stainless shift gates. This setup includes a practically new clutch that has only 2000 or so miles on it. I would like $5,000 for this setup. ($4k for the other)
Shipping/freight is available and will vary from 250 to 650 ish depending on distance from me. I'm in Farmington Michigan
Rebuilt/upgraded setup sold! Original setup up for grabs still
https://photos.app.goo.gl/zXnXC9eRCUbwf4jZ6
PHOTOS^