Vacuum Solenoid Connector Missing

[mwesten]

Hey all - I?ve been told the vacuum solenoid on the backside of the engine should have a wire connected to the male prongs? but I can?t for the life of me locate anything that would connect to it. Can anyone tell/show me what the wire looks like that goes there?

69483

[Ron]

Should be a Black with Blue stripe wire. The other end of it connects to the Black with Light Green stripe wire connected to the Idle Speed Switch. The other wire in the plug is Green.

[mwesten]

Should be a Black with Blue stripe wire. The other end of it connects to the Black with Light Green stripe wire connected to the Idle Speed Switch. The other wire in the plug is Green.

Thx for the reply. It?s weird because I?m not seeing any black/blue wire available to connect. The idle speed MS has a black and black/green wire coming from it straight to the engine wiring harness. Ignoring the idle speed motor assuming you meant the idle MS.

There is a set of 3 wires (black and black/blue) that feed into one of those white plastic push-in connectors (the kind with the two circles). This one?s not connected to anything.

[82DMC12]

Thx for the reply. It?s weird because I?m not seeing any black/blue wire available to connect. The idle speed MS has a black and black/green wire coming from it straight to the engine wiring harness. Ignoring the idle speed motor assuming you meant the idle MS.

There is a set of 3 wires (black and black/blue) that feed into one of those white plastic push-in connectors (the kind with the two circles). This one?s not connected to anything.

I just addressed this in another owner's post this morning - https://dmctalk.org/showthread.php?19667-New-owner-looking-for-help

[Ron]

Yes, back to the idle speed micro switch.
69489

[Rich]

Hey all - I?ve been told the vacuum solenoid on the backside of the engine should have a wire connected to the male prongs? but I can?t for the life of me locate anything that would connect to it. Can anyone tell/show me what the wire looks like that goes there?

No, it is connected to two wires with on connector.

First view is from left side with its 2-pin female connector in place on solenoid.
Second view (fuzzier) is from above with female connector removed, showing the 2 holes for the twin male pins on the solenoid.
(there is no polarity on this plug - it works in either orientation)

69490 69491

[mwesten]

Well, I found it! Thanks everybody for your input. Love this place.

For those wondering, for some reason the connector seemed to have been stuffed under the crossbar brace behind the engine.