DeLorean Frunk 3D Scan

[bitMuse]

And another entry in my series of 3D scans. This time of the frunk of the Delorean. It goes up to the weather sealing lip down to the frame. This is of my car and the notable different here is that I have a frunk floor delete. The scan goes all the way back to where the wishbone of the frame meets and goes all the way forward to the radiator and horn mounts.

As always, provided for free to the community, I hope it is useful.
https://www.dropbox.com/scl/fi/h5wcba3xqjqwm40a8w3kh/Delorean-Frunk-Reduced-Res-mm.stl?rlkey=41gqgh6i8yu2yyo18jlrwp0ln&dl=0

[jangell]

These are excellent -- thanks for making these public!

-- Joe

[Josh]

Wow, thank you again. Checked put the model and it was more than expected with the portions of the frame below. I have been thinking about building a baffled fuel tank so this would be perfect.

Thank you!

[bitMuse]

No problem! Hope it helps everyone out a lot. I will probably do one more 3D scan in the future of the dash interior but I think that's about it from me. :P