PDA

View Full Version : Bailout/Oxygen tank ...


jeanmariecannie
08-02-2024, 06:55 AM
We managed to do an exact replica of the bailout/oxygen tank that site behind the drivers seat.

Find out more about it here :

https://movieprops.blog/delorean-bttf-oxigen-tank

70747707487074970750
EngineerGuY
08-21-2024, 01:29 PM
You did a great job. All of your parts are turning out to be amazing. Excited to see what else you come up with.
Mark D
08-21-2024, 03:24 PM
Nice job on the reproductions, although my one bit of feedback would be that you replicated the wrong type of bottle. It should not have a necked section where the valve screws into the bottle.


https://dmctalk.org/attachment.php?attachmentid=70793&d=1724268200

https://dmctalk.org/attachment.php?attachmentid=70794&d=1724268212
Helirich
08-22-2024, 12:33 PM
What is this about? Something from the movie?
Timeless
08-22-2024, 12:38 PM
What is this about? Something from the movie?
Serious? Sarcasm?
Helirich
08-23-2024, 10:09 AM
Serious? Sarcasm?

Serious, it?s been awhile since I?ve seen the movie(s). I don?t recall anything about it. Was it used in the flick?
mike123
08-23-2024, 02:08 PM
It was used in the movie cars, but not really seen in the movie itself.

One of the interesting things about working on a replica of the movie cars is that there's dozens of item details that never got shown onscreen at all, or only shown for a fraction of a second and in bad lighting etc. But these details can be traced back to the original artist sketches, that were then turned into real tangible parts by the production crew (and in some cases they were even wired with some electronic capabilities), but ultimately not ever really appreciated at the time.
dn010
08-26-2024, 09:43 AM
All you have to do is click on his link and it will show you where it was used...
Mark D
08-26-2024, 11:56 AM
https://dmctalk.org/attachment.php?attachmentid=70804&d=1724687774

https://dmctalk.org/attachment.php?attachmentid=70805&d=1724687784
jeanmariecannie
09-26-2024, 09:08 AM
Nice job on the reproductions, although my one bit of feedback would be that you replicated the wrong type of bottle. It should not have a necked section where the valve screws into the bottle.
Hi Mark,

Thx for the info. If I ever get rid of the current stock I did I'll update the model :)