Andy_
08-23-2024, 02:05 PM
My car has the early blue/ yellow wire instead of the red/ white at the TTS.
Someone has spliced the blue/yellow TTS into the red/ white at the CSV.
As i understand, the blue / yellow wire on the blue bulkhead connector (pin 24) should be wired to the TTS blue/ yellow, and the starter blue/yellow. Mine only goes to the starter.
Will this affect the circuit? Should i unsplice the TTS back to the blue connector?
My TTS may be ok , not exactly sure.
Between the 2 connections is 75 ohm, hot or cold.
Pin 1 to earth is 75 ohm.
Pin 2 to earth 0.5 ohm.
When heated they both go open/ to infinity.
Any help appreciated, going to try and fix the wires tomorrow.
Someone has spliced the blue/yellow TTS into the red/ white at the CSV.
As i understand, the blue / yellow wire on the blue bulkhead connector (pin 24) should be wired to the TTS blue/ yellow, and the starter blue/yellow. Mine only goes to the starter.
Will this affect the circuit? Should i unsplice the TTS back to the blue connector?
My TTS may be ok , not exactly sure.
Between the 2 connections is 75 ohm, hot or cold.
Pin 1 to earth is 75 ohm.
Pin 2 to earth 0.5 ohm.
When heated they both go open/ to infinity.
Any help appreciated, going to try and fix the wires tomorrow.