Passenger side markers not working - Any ideas?

[usefulshrimp]

My side markers have stopped working on the passenger side only. I have purchased new bulbs and verified that they are working correctly, but it appears I am not receiving any power to them. Do you have any idea what the problem could be? All the fuses look to be good.

My guess is a corroded bullet connector behind the front wheel?

[Bitsyncmaster]

Do all other lights work?

[JohnZ]

You already said that the fuses seem to be ok, but have you tried to replace fuse 8 anyway?

I accidentally blew it once, but as Dave says other lights were gone at the same time

Inviato dal mio moto g42 utilizzando Tapatalk

[JohnnyK]

My guess is a corroded bullet connector behind the front wheel?

Well with your multimeter, where does the power end? Have you metered that side of the bullet connector?

[Timeless]

This happened to me. Issue was I shorted 2 the circuit by the license plate lamps touching sometime during driving. I have aftermarket LED license lamps and connections were not secure moving around behind the fascia. Fuse kept blowing every time I turned the lights on.

Verified exterior lamp connections were clean and in good shape.
Unplugged the black bulkhead connector in the engine bay, corrected/secured license plate wiring, replaced fuse.
Plugged black bulkhead connector back in and all exterior lights working as designed.